The LIOB-45x Modules are LonMark certified and communicate over Ethernet/IP-852 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.
LonMark IP-852 Channel over Ethernet
The LIOB-45x I/O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.
The LIOB-45x Modules are equipped with a Web interface to query the device status. The local display can be accessed via VNC.
LIOB-IP Mode
The LIOB‑45x Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑45x Modules extend L‑INX Automation Servers, L‑ROC Room Controllers and L-IOB I/O Controllers with physical inputs and outputs via plug and play.
Local Operation and Override
All L-IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.
Features
- I/O module with physical inputs and outputs
- Ethernet/IP network interface
- SNVT-based interface for integration on the LonMark IP-852 channel
- LonMark certified
- Up to 512 address table entries (ECS mode)
- Manual operation using the jog dial
- 128×64 graphic display with backlight
- Local access to information about device status and data points in clear text and symbols
- Connected to the L‑INX Automation Server, L‑ROC Room Controller and L-IOB I/O Controller via LIOB‑IP
- Automatic integration into device configurations with L‑INX, L‑ROC and L-IOB I/O Controller,
- Easy device replacement without any additional software
- Integrated Web server for the device configuration
- LNS plug‑in for the device configuration in the LonMark System
LIOB-IP852 I/O Modules LonMark Products
LIOB-450
LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)
LIOB-451
LIOB-IP852 I/O Module: 8 UI, 12 DI
LIOB-452
LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)
LIOB-453
LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor
LIOB-454
LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor
LPOW-2415A
LIOB-Connect Power Supply, 24 VDC, 15 W
LPOW-2415B
Power supply unit with power connector 24 VDC, 15 W
L-TEMP2
External temperature sensor (NTC10K) for use with L-IOB Universal Inputs
