KEPLER Smart Control Panel KCP-TH4 by Kepler Electronics

The KCP-TH4 Smart Control Panel is designed for smart temperature control, directly compatible with central air conditioning fan coil systems. It offers gateway functionality, temperature control, interactive functions, and a scene panel.

Key Features and Highlights:

*   Compatibility: Central air conditioning fan coil systems (verify equipment before installation). Supports DX AC Units,  2-pipe and 4-pipe systems, 0-10V DC output, and optional 485 connectivity.

The post Smart Control Panel KCP-TH4 appeared first on Kepler Electronics.

6-Key DALI Wall Switch Touch Panel KDALI-6B-G

This 6-Key DALI Wall Switch Touch Panel is a DALI-2 control device with 6 touch buttons according to IEC62386- 101, IEC62386-103, IEC62386-301 and IEC62386-332. This device supports feedback functionality provides 12 LEDs, and is suitable for integration and in combination with DALI-2 compliant central control units. It is multimaster capable, and its multiple modules allow it to be installed on the DALI- line. Moreover, this panel is powered by DALI bus, and no extra power supply is required. It can also be configured via DALI-2 compliant central controller USB interface, and is compatible with universal 55mm frames.

Key Features

• DALI-2 control device with 6 touch buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332
• Supports feedback functionality, provides 12 LEDs
• Suitable for integration and in combination with DALI-2 compliant central control units
• Multimaster capable, multiple modules can installed on the DALI- line
• DALI bus powered, no extra power supply required
• Easy configuration via DALI-2 compliant central controller USB interface
• Compatible with universal 55mm frames

Specifications

Product Dimensions

Wiring Diagram

The post KDALI-6B-G appeared first on Kepler Electronics.

8-Key DALI Wall Switch Touch Panel KDALI-8B-G

This 8-Key DALI Wall Switch Touch Panel is a DALI-2 control device with 8 touch buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332. This device supports feedback functionality, provides 16 LEDs, and is suitable for integration and in combination with DALI-2 compliant central control units. It is multimaster capable, and its multiple modules allow it to be installed on the DALI- line. Moreover, this panel is powered by DALI bus, and no extra power supply is required. It can also be configured via DALI-2 compliant central controller USB interface, and is compatible with universal 55mm frames.

Key Features

• .DALI-2 control device with 8 touch buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and
  IEC62386-332
• Supports feedback functionality, provides 16 LEDs
• . Suitable for integration and in combination with DALI-2 compliant central control units
• . Multimaster capable, multiple modules can be installed on the DALI- line
• . DALI bus powered, no extra power supply required
• . Easy configuration via DALI-2 compliant central controller USB interface
• . Compatible with universal 55mm frames

Product Dimensions

Wiring Diagram

The post KDALI-8B-G appeared first on Kepler Electronics.

This 4-Key DALI Wall Switch Touch Panel is a DALI-2 control device with 4 touch buttons according to IEC62386- 101, IEC62386-103, IEC62386-301 and IEC62386-332. This device is suitable for integration and in combination with DALI-2 compliant central control units. It is multimaster capable, and its multiple modules allow it to be installed on the DALI- line. Moreover, this panel is powered by DALI bus, and no extra power supply is required. It can also be configured via DALI-2 compliant central controller USB interface, and is compatible with universal 55mm frames.

Key Features

• DALI-2 control device with 4 touch buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and
  IEC62386-332
• Supports feedback functionality, provides 8 LEDs
• Suitable for integration and in combination with DALI-2 compliant central control units
• Multimaster capable, multiple modules can be installed on the DALI- line
• DALI bus powered, no extra power supply required
• Easy configuration via DALI-2 compliant central controller USB interface
• Compatible with universal 55mm frames

The post KDALI-4B-G appeared first on Kepler Electronics.

High-end Intelligent Touch Panels 220 VAC I Zigbee I Modbus RS485

Product introduction

Technical parameters

• Suitable for any card
• Suitable for 13.56MHz High
  Frenquency cards
• 2 energy saving switches
  available

PRECISION CRAFTED – MATCH AS YOU LIKE
The consistency and standardized structure of the panel’s appearance, its simple yet uncomplicated, robust profile and modular and flexible design can be used with a wide range of scenarios.

FULL SCREEN TEMPERED GLASS PANEL
The panel is made of 4mm toughened glass and is available in a variety of colors, supporting customized icons and text.

Musical bells
A choice of 36 built-in 8-chord ringtones with 5 adjustable volume levels. Compared to traditional mechanical bells, it provides a more
pleasant ring ing sound. The LED indicator on the front flashes when the bell rings, which is very convenient and practical for those with hearing impairments.
Intelligent temperature control
This panel is used for thermostatic control, LCD digital display, with power on/off button, fan speed and temperature adjustment, with
customizable icons.

HOTEL/ SMART HOME APPLICATION SYSTEM SOLUTION
The backend office control system uses a B/S architecture. On the mobile platform (tablet/phone) it can verify information (check-in/SOS/service/cleaning etc.) and modify the debugging backend. The front computer only needs to access a web page; no other software
needs to installed to view the room dynamics instantly

Hotel room intelligent control system composition diagram

• CD Room intelligent control host
• All control panels of guest rooms (including lighting control, air conditioning, dimming, service control, etc.)
• Guest room door display, energy saving switch, door bell, door magnet, infrared etc.
• Network support (including selected 485 bus or TCP /P Ethernet) products and computer equipment
• Collect all room information and send information to the intelligent system software
• Apple lpad, IPHONE, Android phones and tablets, visitor image display lights

KEPLER G SERIES KZIG-G-xG Products

Small door display

The post KZIG-G-xG Touch Panels G Series appeared first on Kepler Electronics.

L-VIS Touch Panels for LonMark, BACnet, and Modbus networks are ideally suited for visualization and operation of various applications in building automation. L-VIS Touch Panels visualize building systems, can be used as room operator panels, in hospital operation or isolation rooms, conference and reception areas. The fully customizable user screens can show dynamic pages that are easy to navigate. L-VIS Touch Panels make use of an extremely low power embedded controller platform and operating system. This makes L-VIS resistant against problems when re-booting after power outage and also against any viruses.

L-VIS impresses with its timeless design, harmonic integration into modern and historical architecture, and with its extremely user friendly concept. The shallow installation depth and low thermal power loss allow mounting in almost any location.

Different Sizes

L-VIS Touch Panels are available in the following variations:

LVIS-3ME7-Gx

• Touch Display, 800 x 480, 262 144 colors
• Frameless glass front and capacitive touch

LVIS-3ME12-Ax

• 12,1“ Touch Display, 800 x 600, 262 144 colors
• Aluminum frame with anodized finish 

LVIS-3ME15-Ax

• 15“ Touch Display, 1024 x 768, 262 144 colors
• Aluminum frame with anodized finish 

LVIS-3ME15-Gx

• 15“ Touch Display, 1024 x 768, 262 144 colors
• Frameless glass front and capacitive touch 

Dynamic Graphical Pages

The graphical pages may consist of multiple dynamic graphical controls that show the current plant status in real time. It is also possible to access decentralized schedules, alarm servers, or trends. The graphical projects are designed with the L-VIS/‌L-WEB configuration tool free of charge. Without any know-how in HTML or Java, user specific graphical pages can be created. Dynamic information is shown through value or text controls, changing symbols, bar charts, trend views, alarm and event lists, or schedule controls. The L-VIS/‌L-WEB configuration tool allows for using most of the pixel graphic formats (GIF, JPG, BMP, TIFF, PNG, MNG, ICO), vector graphics (SVG) and alpha blending.

Playback of Audio Files and Streams

The L-VIS Touch Panel supports the playback of stereo MP3, WAV, and MP3 streams (for example webradio). The playback will be started or stopped by the respective action object. The action object is linked to one of the available audio files or to the URL of an MP3 stream. When accessing a playback via LWEB‑802 or LWEB‑803, it will be executed locally on the client.

Automatic Page Generation

Pages including data point names and values, alarm views, schedules or trends can be created automatically by the L-VIS/L-WEB configuration tool. This significantly reduces engineering time and cost.

Connectivity and Data Points

The L-VIS Touch Panels support connectivity to LonMark Systems and  BACnet networks. In addition, the Touch Panels provide communication to Modbus either as Master or Slave. For this purpose, Modbus TCP is supported exclusively and Modbus RTU is available via the RS‑485 terminal.

L-VIS Touch Panels communicate with LonMark Systems via IP-852 (Ethernet/‌IP) or TP/‌FT‑10 channels. The integrated remote network interface (Ethernet/‌IP) provides remote access to the TP/‌FT‑10 channel for configuration, service and maintenance purposes.

In addition, the L‑VIS Touch Panels provide connectivity to Modbus TCP via Ethernet/‌IP.

BACnet networks are connected via BACnet/‌IP, BACnet/‌SC or BACnet MS/‌TP. The L-VIS Touch Panels implement the BACnet Building Controller (B-BC) profile. They include a fully featured built-in BACnet/‌IP, BACnet/‌SC to MS/‌TP router with BBMD (BACnet Broadcast Management Device) and slave proxy functionality.

Math objects can calculate any kind of formula using data points available on the device. The resulting data point value can then be either shown on the page or provided via an output Network Variable. Network Variables are automatically mapped to OPC data points that can be accessed via Web services.

The L-VIS devices provide fully featured AST functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L-WEB Building Management System.

The L-VIS devices are equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configure to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/‌IP, LON/‌IP, or Modbus TCP are present. These devices also feature firewall functionality of course to isolate particular protocols or services between the ports.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The L‑VIS devices provide fully featured AST functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L‑WEB Building Management System.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Features

• High resolution TFT touch display with dimmable backlight
• Anodized aluminium front frame or frameless glass front and capacitive touch (LVIS-3ME7‑Gx/LVIS-3ME15-Gx)
• Flush-mounting in combination with the mounting frame
• Stores customized graphical pages
• Visualization of customized graphical pages through built-in touch panel, LWEB‑900 (building management), and LWEB‑802/‌803
• Device configuration and graphical page creation with the L-VIS/L-WEB configuration tool free of charge
• Supports all popular graphic file formats such as GIF, JPEG, BMP, TIFF, PNG, MNG, ICO
• Support of SVG vector graphics
• Supports alpha blending
• Supports popular font types such as TrueType, Type-1, BDF, PCF, and OTF
• Supports Unicode text and complex writing systems
• Built-in OPC UA and OPC XML-DA server
• Built-in OPC XML-DA client
• Dual Ethernet/IP Interface
• Alarming, Scheduling, and Trending (AST)
• Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
• Event-driven e-mail notification
• Math objects to execute mathematical operations on data points
• Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
• Supports CEA-709 TP/‌FT‑10 or IP-852 (Ethernet/‌IP)
• Support of dynamically created network variables or static network variables
• Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
• Remote Network Interface (RNI) with 2 MNI devices
• Compliant with ANSI/ASHRAE–135‑2012 and ISO 16484‑5:2012 standard
• Supports BACnet MS/TP, BACnet/IP, BACnet/‌SC
• BACnet Client Function (Write Property, Read Property, COV Subscription)
• BACnet Client Configuration with configuration tool (scan and EDE import)
• B-BC (BACnet Building Controller)
• Integrated BACnet/‌IP, BACnet/‌SC to BACnet MS/‌TP Router
• BBMD (BACnet Broadcast Management Device)
• Modbus TCP and Modbus RTU (Master or Slave)
• Integrated web server for device configuration and monitoring data points
• Access to network statistics
• Configurable via Ethernet/‌IP or TP/FT‑10
• Playback of audio files and streams
• Supports WLAN through LWLAN-800 Interface
• Supports LTE through LTE-800 Interface

Tutorials

Features of L-VIS Firmware Release 7.2

How to create schedulers (CEA-709) [A001]

This tutorial describes how to create schedulers on an L-VIS Touch Panel with the configuration tool L-VIS Configurator.

How to create a calendar including exception days (CEA-709) [A002]

This tutorial describes how to create a calendar including exception days on an L-VIS Touch Panel with the configuration tool L-VIS Configurator.

How to operate a scheduler on the web interface of a L-INX Automation Server [A004]

This tutorial describes how to use the Web UI of the L-INX Automation Server.

How to create a remote scheduler (CEA-709) [A005]

This tutorial describes how to configure the L-INX Automation Server with the configuration tool NL220 LonWorks© Manager

How to create alarms (CEA-709) [A006]

This tutorial describes how to create alarms on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to use e-mail configuration [A007]

This tutorial describes how to configure the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create trend objects [A008]

This tutorial describes how to create trend objects on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create static network variables [B001]

This tutorial describes how to create static network variables on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create dynamic network variables [B002]

This tutorial describes how to create dynamic network variables on the L-INX Automation Server with the configuration tool NL220 LonWorks© Manager.

How to create network variables by using LNS scan [B003]

This tutorial describes how to create network variables by using LNX scan on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create network variables by using network scan [B004]

This tutorial describes how to create network variables by using network scan on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to import network variables by using CSV file import [B005]

This tutorial describes how to import network variables by using CSV file import on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to import extern network variables (LNS scan or network scan) [B006]

This tutorial describes how to import extern network variables on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create network variables by using Filter Templates [B007]

This tutorial describes how to create network variables by using Filter Templates on the L-INX Automation Server with the configuration tool L-INX Configurator.

L-VIS/L-WEB Configurator – How to use text controls [V001]

L-VIS/L-WEB Configurator – How to use number controls [V002]

L-VIS/L-WEB Configurator – How to use schedulers [V003]

L-VIS/L-WEB Configurator – How to use bar controls [V004]

L-VIS/L-WEB Configurator – How to create simple menu structure [V005]

L-VIS/L-WEB Configurator – How to use costum fonts [V006]

L-VIS/L-WEB Configurator – How to create math objects [V007]

L-VIS/L-WEB Configurator – How to create different actions [V008]

L-VIS/L-WEB Configurator – How to create alarm lists [V009]

L-VIS/L-WEB Configurator – How to create data logs [V010]

L-VIS/L-WEB Configurator – How to create templates [V011]

L-VIS/L-WEB Configurator – How to create templates including datapoints [V012]

L-VIS Tutorial: Reset to Factory Defaults – LVIS-3MEx [V013]

L-VIS Tutorial: Reset to Factory Defaults – LVIS-3Ex, LVIS-MEx [V014]

A quick start scenario creating an L-WEB database [W002]

This tutorial describes how to create a database with the LWEB Server and the configuration tool L-INX Configurator on the example of configuring the L-INX Automation Server.

L-VIS Touch Panels for LonMark, BACnet, and Modbus networks Products

LVIS-3ME7-G1

CEA-709, BACnet, and Modbus Touch Panel 7″, frameless glass front and capacitive touch, silver

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME7-G2

CEA-709, BACnet, and Modbus Touch Panel 7″, frameless glass front and capacitive touch, black

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME12-A1

CEA‑709, BACnet, and Modbus Touch Panel 12.1″, aluminum frame with anodized finish

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME15-A1

CEA‑709, BACnet, and Modbus Touch Panel 15″, aluminum frame with anodized finish

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME15-G1

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, silver

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME15-G2

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, black

• Contact Sales for quote request
• Documentation and Software

LVIS-3ME15-G3

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, white

• Contact Sales for quote request
• Documentation and Software

LVIS-FRAME7

Mounting frame for 7″ Touch Panels

• Contact Sales for quote request
• Documentation and Software

LVIS-FRAME12

Mounting frame for 12.1″ Touch Panels

• Contact Sales for quote request
• Documentation and Software

LVIS-FRAME15

Mounting frame for 15″ Touch Panels

• Contact Sales for quote request
• Documentation and Software

LVIS-MNTKIT-U

L-VIS Mounting Kit Universal (LVIS-FRAMEx not included)

• Contact Sales for quote request
•  Documentation and Software

LVIS-ONWALL7

Wall mount frame side cover for LVIS-3ME7 (2 pieces), needs LVIS-FRAME7

• Contact Sales for quote request
• Documentation and Software

LVIS-ONWALL12

Wall mount frame side cover for LVIS-3ME12 (2 pieces), needs LVIS-FRAME12

• Contact Sales for quote request
• Documentation and Software

LVIS-ONWALL15

Wall mount frame side cover for LVIS-3ME15 (2 pieces), needs LVIS-FRAME15

• Contact Sales for quote request
• Documentation and Software

LVIS-STAND7

Demo Stand for LVIS-3ME7-Gx Touch Panels

• Contact Sales for quote request
• Documentation and Software

LVIS-STAND12

Demo Stand for LVIS-3ME12-Gx Touch Panels

• Contact Sales for quote request
• Documentation and Software

LVIS-STAND15

Demo Stand for LVIS-3ME15-Gx Touch Panels

• Contact Sales for quote request
• Documentation and Software

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

• Contact Sales for quote request
• Documentation and Software

LTE-800

LTE Interface

• Contact Sales for quote request
• Documentation and Software

The post L-VIS Touch Panels for LonMark, BACnet, and Modbus networks appeared first on Kepler Electronics.

OYTEC presents the new glass L-VIS devices with 7” and 15” display that come with frameless glass front and capacitive touch. The glass surface provides a high-quality, modern appearance. The capacitive touch sensor allows for operation without any pressure on the surface. Glass fronts for 15″ devices can be ordered in silver, black, and white. The 7″ touch panels are available in silver and black. Discover here the LOYTEC glass L-VIS Touch Panels for LonMark, BACnet, and Modbus networks!

The post Glass L-VIS Touch Panels appeared first on Kepler Electronics.