Ceiling Mount DALI-2 PIR+Photocell Sensor KDALI-PIR

The ceiling mount multi-sensor is DALI-2 device which combines motion sensor and light sensor. The device performs motion detection and measures illuminance level. The DALI-2 multi-sensor can work with D4i LED drivers or luminaires. The luminaires just need to be connected to mains power. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes. The sensor is suitable for low bay applications which need sensor based automation.

Key Features

• PIR motion detection
• Motion sensor instance type 3 (303)
• Illuminance measurement
• Light sensor instance type 4 (304)
• Autonomous sensor-based control
• Ceiling recessed installation

Specifications

Product Dimension

Wiring Diagram

The post KDALI-PIR appeared first on Kepler Electronics.

DIN Rail 4 Channles DALI-2 Relay KDALI-RM-4CH

The KDALI-RM-4CH is a DALI-2 4 channels relay module with zero crossing detection powerd by DALI bus.4 DALI addresses can be assigned by DALI master controller automatically

Key Features

• DALI relay module with zero crossing detectio
• DIN rail installation
• 100-240VAC power supply
• 4 channels relay module
• DALI addresses can be assigned by DALI master controller automatically
• Control 4 relays separately
• Control of 4 standard contactors
• DIN rail relay module for controlling 4 standard contactors via DALI
• Loads that do not have a DALI input can therefore be integrated in the DALI circuit
• The loads can be switched on and off via DAL
• Compatible with universal DALI systems and master controllers in the market
• DIN rail installation, compatible with standard 35mm DIN rail
• years warranty
• Waterproof grade: IP20

Specification

Product Dimension

Wiring Diagram

The post KDALI-RM-4CH appeared first on Kepler Electronics.

DALI-2 relay module KDALI-RM-1CH

The KDALI-RM-1CH is a DALI-2 relay module which is capable of switching both AC and DC loads.The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.

Key Features

• DALI-2 relay module
• 100-240VAC power input
• 1 DALI address can be assigned by DALI master controller
• Compatible with DALI and DALI-2 versions
• Compliant to IEC 62386-208
• Loads that do not have a DALI input can therefore be integrated in the DALI circuit
• >1 channel actuator (switch) with DALI-2 input
• Switching voltage 100-240VAC
• Mini Size, easy to be Installed into a standard wall box
• Compliant DALI device type 7
• 5 years warranty
• Waterproof grade: IP20

Specification

Product DimenDimension

Wiring Diagram

The post KDALI-RM-1CH appeared first on Kepler Electronics.

DALI Relay Module + DALI to 0/1-10V Converter KDALI-RM-10V

The KDALI-RM-10V is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC loads and controlling 0/1-10V dimmable loads, The max switching voltage for AC loads is 250V, and the max switching voltage for DC loads is 50V. The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads. The DALI to 0/1-10V converter enables to integrate 0/1-10V dimmable loads into DALI circuit and control the loads via DALI.
The max. load capacity for conventional incandescent and halogen light sources is 1000W (5) 2 30V, and max. load capacity for LED light sources is 300W @ 230V. It is easy to be installed into existing standard wall boxes or mounted on 35mm DIN rail with an extra mounting bracket.

Key Features

• DALI relay module + DALI to 0/1-10V converter
• 2 in 1 DT6 & DT7 versions available
• DALI-2 certified
• Enable to switch power of the 0/1-10V load through the relay
• DALI bus powered, no extra power supply required
• 1 DALI address can be assigned by DALI master controller
• Control of one standard contactor
• Compact relay module for controlling a standard contactor via DALI
• Loads that do not have a DALI input, can therefore integrated in the DALI circuit
• The loads can be switched on and off via DALI
• Compatible with universal DALI systems and master controllers in the market
• Mini Size, easy to be Installed into a standard wall box
• 5 years warranty
• Waterproof grade: IP20

Specification

Product Dimension

Wiring Diagram

The post KDALI-RM-10V appeared first on Kepler Electronics.

4 Channels DIN Rail DALI + Push Phase Dimmer KDALI-PH-4CH

The KDALI-PH-4CH is a DALI + Push phase cut dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to control phase cut dimmable LED lamps, traditional incandescent and halogen lights. It is also compatible with universal phase cut dimmable LED drivers.The DALI phase dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer adopts trailing edge dimming (reverse-phase control) and comes with 4 channels and maximum 1.8A per channel output. 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI phase dimmer can be compatible with universal DALI systems.
It is designed with DIN rail installation style,and can be easily mounted on standard 35mm DIN rail.

Key Features

• DALI certified
• TUV CE certified
• Safe and reliable full isolation design
• 100-240VAC input and 100-240VAC output
• 4 channel, maximum 1.8A per channel output
• DALI control interface with digital numeric digital display to set and show DALI address freely
• Can be controlled by existing push button switch even without a DALI system
• 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately
• Trailing edge dimming (reverse-phase control)
• Great compatibility with universal DALI master controllers
• Innovative minimum brightness setting function
• To dim and switch phase cut dimmable LED lamps, traditional incandescent and halogen lights
• Compatible with universal phase cut dimmable dimmable LED drivers

Specification

Wiring Diagram

The post KDALI-PH-4CH appeared first on Kepler Electronics.

• Contact Sales for quote request
• Download KDALI-PH-2CH User Manual

2 Channels AC Triac DALI Dimmer KDALI-PH-2CH

The KDALI-PH-2CH is a Triac DALI dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to dim and switch single color LED lamps, traditional incandescent and halogen lights. It is also compatible with universal triac dimmable LED drivers. The DALI dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer is trailing edge dimming (reverse- phase control) and comes with 2 channels and maximum 1.2A per channel output. 1/2 DALI addresses can be settable to control 2 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI dimmer can be compatible with universal DALI master controllers.

Key Features

• DALI certified
• TUV CE certified
• Safe and reliable full isolation design
• 100-240VAC input and 100-240VAC output
• 2 channel, maximum 1.2A per channel output
• DALI control interface with digital numeric digital display to set and show DALI address freely
• 1/2 DALI addresses can be settable to control 2 output channels synchronously or separately
• Trailing edge dimming (reverse-phase control)
• Great compatibility with universal DALI master controllers
• Innovative minimum brightness setting function
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Compatible with universal triac dimmable LED drivers

Specification

Wiring Diagram with Dimmable LED Light

Wiring Diagram with Dimmable LED Driver

The post KDALI-PH-2CH appeared first on Kepler Electronics.

DALI + Push AC Phase Cut Dimmer KDALI-PH-1CH

The KDALI-PH-1CH is an innovative AC phase cut dimmer with DALI and Push control interface. The AC dimmer is designed with 100-240VAC wide input and output, 1 channel and maximum 400W output. The DALI phase dimmer adopts trailing edge dimming. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The AC dimmer can be compatible with universal DALI systems. It is controllable from your DALI master controller or with an existing push button switch even without a DALI system

Key Features

• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2 interface, DALI DT6 device
• Match all DALI systems in the market
• AC phase cut dimmer with both DALI and push switch control interface
• 100-240VAC Wide Input and Output Voltage
• 1 DALI address to control 1 Channel Output, Up to 400W
• Input and Output with Screw Termina Is, Safe and Reliable
• Trailing edge dimming, supports resistive loads and capacitive loads
• Innovative minimum brightness setting function
• Single Wire Push Switch Input for Push Dim Function
• Great Compatibility with Universal 8V-230V- Input Push Switches
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Mini Size, Easy to be Installed into a standard size wall box

Specification

Product Dimension

Wiring Diagram

The post KDALI-PH-1CH appeared first on Kepler Electronics.

KNX to 2 Channel DALI Gateway KDALI-KNX-2CH

The KNX DALI Gateway is a DIN rail module for installation in the distribution board on a 55 mm mounting raiL It is a DALI single-master controller to DALI standard IEC 62386 Parts 101ed2 and lOSedl.The gateway is suitable for use with DALI and DALI-2 systems.lt supports Device Type 6. Device Type 8 Tc, Device Type 8 XY coordinate. Device Type 8 RGB with DALI interfaces to IEC 62386 and their integration in a KNX building installation.The DALI gateway has 2 channels DALI output Up to 64 DALI devices can be connected to each DALI output DT6 and DT8 devices can all be connected to each DALI output in a mixed configuration.The lamps connected to each DALI channels are controlled via KNX usinghroadcast64 individual lamps;16 lighting groups;16 scenes

Key Features

• Integrated DALI into KNX system
• 2 channels DALI output
• Each DALI channel with 25CmA DALI PS output
• No ext’a DALI PS required. simpLe wiring
• Supports all DALI DT6 & DTS device types
• Mini USB port to connect to DALI PC software
• Programmable through ETS software
• DALI bus state monitor indicator

Specification

Product Dimension

Wiring Diagram

The post KDALI-KNX-2CH appeared first on Kepler Electronics.

DIN Rail DALI master controller KDALI-MASTER-1CH

Key Features

• Central controller of a DALI system to control DALI control gears on the DALI line
• Designed with built-in 230mA DALI PS to power the DALI circuit
• Dip switches can used to disable or enable built-in DALI PS
• Once built-in DALI PS is disabled, the master controller can be connected to an external DALI PS
• Each DALI channel enables to automatically assign and manage addreses to up to 64 control gears
• The control gears can assigned to up to 16 groups
• Supports 5 DALI control gear device types: DT6, DT8 Te, DT8 XY coordinate, DT8 RGBWA, DT7 Switching actuator
• Each DALI channel also supports all types of DALI-2 input devices include push buttons, motion sensors, light sensor, rotary switch and touch panels
• Each DALI channel can address and manage up to 64 DALI-2 input devices
• The input devices can assigned to up to 32 groups.
• Each DALI channel enables to set up to 16 DALI scenes
• Enables to set up to 256 timer tasks
• Enables to set up to 4 types brightness fade and color fade cycle schedules
• Enables to set up to 4 Bionic color temperature schedules for the CCT control gears to mimic natural light change during 24 hours of a day (Human Centric Lighting)
• Designed with PC configuration software tool, enables to configure and read parameters of the master and control gears
• Can easily mounted on 35 mm standard DIN rail

Wiring Diagram

The post KDALI-MASTER-1CH appeared first on Kepler Electronics.

DALI Repeater with Built-in Bus Power Supply KDALI-RPT

KDALI-RPT is a universal DALI signal repeater with built-in bus power supply, which can prolong DALI signal transmission distance of DALI circuit, with built-in DALI bus power supply, the dali repeater enables to establish a subordinate dali circuit from the main DALI circuit without extra DALI power supply required.

Key Features

• DALI repeater with integrated DALI power supply
• Device to enhance the maximum DALI cable length from 300m up to 600m
• Enhancement and Transmission of the DALI-signals (bidirectional)
• Galvanic separation between DALI circuits
• Either radially arranged network layout or cascaded system mounting operated with single master
• restricted cascading (Series wiring) of multiple repeaters in multi-master operating mode
• The maximum amount of DALI-devices in the total network is limited to 64, the devices can be divided on the subordinate circuits at will
• For each subordinate DALI circuits no extra DALI power supply required

Product Dimension

Wiring Diagram

The post KDALI-RPT appeared first on Kepler Electronics.

DALI-2 Certified 2 Key Push Button Wall Switch KDALI-2B-P

The wall switch KDALI-2B-P is industry first DALI-2 certified DALI-2 control device with 2 push buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332.The input device supports feedback functionality and provides 4 LEDs. It is suitable for integration and in combination with DALI-2 compliant central control units.The push button device is multimaster capable, multiple modules can installed on the DALI- line. The DALI-2 input device is DALI bus powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.
This DALI-2 push button is designed with standard 55mm frame, and can be compatible with universal 55mm frames

Click KDALI-2B-P Certification Link from DiiA official website to check the wall switch certification details

Key Features

• DALI-2 Certfied Input Device
• DALI-2 control device with 2 push buttons
• According to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332
• Supports feedback functionality, provides 4 LEDs
• Suitable for integration and in combination with DALI-2 compliant central control units
• Multimaster capable, multiple modules can installed on the DALI- line
• DALI bus powered, no extra power supply required
• Easy configuration via DALI-2 compliant central controller USB interface
• Easy installation, compatible with universal 55mm frames

Specification

Wiring Diagram

The post KDALI-2B-P appeared first on Kepler Electronics.

DALI-2 Certified 4 Key Push Button Wall Switch KDALI-4B-P

The wall switch KDALI-4B-P is industry first DALI-2 certified DALI-2 control device with 4 push buttons accordinç to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332.The input device supports feedback functionality and provides 8 LEDs. It is suitable for integration and in combination with DALI-2 compliant central control units.The push button device is multimaster capable, multiple modules can be installed on the DALI- line. The DALI-2 input device is DALI bus powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.
This DALI-2 push button is designed with standard 55mm frame, and can be compatible with universal 55mm frames

Key Features

• DALI-2 Certfied Input Device
• DALI-2 control device with 4 push buttons
• According to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332
• Supports feedback functionality, provides 8 LEDs
• Suitable for integration and in combination with DALI-2 compliant central control units
• Multimaster capable, multiple modules can be installed on the DALI- line
• DALI bus powered, no extra power supply required
• Easy configuration via DALI-2 compliant central controller USB interface
• Easy installation, compatible with universal 55mm frames

Specification

Wiring Diagram

The post KDALI-4B-P appeared first on Kepler Electronics.