IO Controller Archives - Kepler Electronics

LIOB-594 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:50:28 +0000

LIOB-594 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑594 I/ O Controllers are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/ O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, telemetry using MQTT, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/ O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
Room controller for up to 2 room segments
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment,…)
Event-driven e-mail and SMS (requires LTE-800) notification
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller) functionality, BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/ IEC 14908 Standard (LonMark System)
Supports IP-852 (Ethernet/ IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Math objects to execute mathematical operations on data points
Stores customized graphic pages
Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built-in OPC XML‑DA and OPC UA server
Dual Ethernet/ IP interface
Access to network statistics
Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
Router including BBMD as well as Slave-Proxy functionality
Gateway functions including Smart Auto-Connect
Integrated web server for device configuration and monitoring data points
Stores user-defined project documentation
Connection to EnOcean wireless devices via LENO-80x Interface
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE‑800 Interface
Integration of damper actuator via MP-Bus
Support VPN

*requires L-IOT1 software license

LIOB-594 I/O Controller Products

LIOB-594

L-IOB I/O Controller: 8x Universal I/O (IO), 7x Digital Output (DO) (5x Relay 2A, 2x Relay 6A)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

Actuator 3/4‘‘, 5Nm, MP-Bus cable

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LSTAT-810-GX-LX-CU

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-594 I/O Controller appeared first on Kepler Electronics.

LIOB-586/587/588/589 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:49:52 +0000

Only for Competence Partners
LIOB-586/587/588/589 Datasheet
Installation Instructions LIOB-586/LIOB-587 / LIOB-588 / LIOB-589
L-IOB I/O Controller User Manual
L-IOB Device Selector
General I/O Specifications
Certificates: EC / BTL / UL / AMEV
Downloads LIOB-586 / LIOB-587 / LIOB-588 / LIOB-589

The LIOB‑586/587/588/589 I/O Controllers are IP-enabled, compact, programmable automation stations for LonMark Systems and BACnet/ IP networks with physical inputs and outputs and integrated graphical visualization.

Communication

The LIOB‑586/587/588/589 I/O Controllers are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. LIOB‑586/587/588/589 I/O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/O Controllers are equipped with an LCD-display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols. On the LIOB‑586 /LIOB-587 front panel the six relay outputs can be overridden via 3-way switches.

Power Measurement

External meters can be integrated via M‑Bus or Modbus. The LIOB‑586/587/588/589 I/O Controllers perfectly meet energy management and energy reporting applications. The LIOB‑587 includes built-in power measurement.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO (IEC 61131‑3 or IEC 61499)
Room controller for up to 2 room segments
Extension with physical inputs and outputs using one L‑IOB I/O Module (LIOB‑11x or LIOB‑45x/55x)
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Manual override of each output through switches (LIOB-586 only)
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment, …)
Event-driven e-mail notification
Math objects to execute mathematical operations on data points
Stores customized graphical pages
Visualization of customized graphical pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built-in OPC XML‑DA and OPC UA server
Dual Ethernet/IP interface
Access to network statistics
Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller) functionality, BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
Supports IP‑852 (Ethernet/‌IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP Router including BBMD as well as Slave-Proxy functionality
M‑Bus Master according to EN 13757‑3, connection via optional M‑Bus Converter (L‑MBUS20 or L‑MBUS80)
Gateway functions including Smart Auto-Connect
Modbus TCP and Modbus RTU (Master or Slave)
Integrated web server for device configuration and monitoring data points
Connection to EnOcean wireless devices via LENO‑80x Interface
Supports WLAN through LWLAN‑800 Interface
Supports MP-Bus through LMPBUS-804 Interface
Supports LTE through LTE‑800 Interface
Stores user-defined project documentation
Supports VPN

*requires L-IOT1 software license

LIOB-586/587/588/589 I/O Controller Products

LIOB-586

L-IOB I/O Controller: 6 UI, 4 DI, 6 DO (6 x Relay 10 A Type2)

LIOB-587

I/O Controller, 6 UI, 4 DI, 6 DO (6 x Relay 10 A Type2), 6 channel power measurement built-in

LIOB-588

L‑IOB I/O Controller: 10 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-589

L‑IOB I/O Controller: 10 UI, 6 AO, 6 DI, 4 DO (4x Relay 6 A)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

LMPBUS-804

MP-Bus Interface for 16 devices per channel, up to 4 channels

L-MBUS20

M-Bus level converter, interface for 20 M-Bus devices

L-MBUS80

M-Bus Level Converter, Interface for up to 80 M-Bus devices

LRS232-802

USB to 2x RS-232 Interface

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

LIOB-100

LIOB-Connect I/O Module: 8 UI, 2 DI, 2 AO, 9 DO (5 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-101

LIOB-Connect I/O Module: 8 UI, 16 DI

LIOB-102

LIOB-Connect I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-103

LIOB-Connect I/O Module: 6 UI, 6 AO, 5 DO (5 x Relay 16 A)

LIOB-110

LIOB-Connect I/O Module: 20 Universal I/O (IO)

LIOB-112

LIOB‑Connect I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-453

LIOB-IP852 I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-551

LIOB-BIP I/O Module: 8 UI, 12 DI

LIOB-552

LIOB-BIP I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-553

LIOB-BIP I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-554

LIOB-BIP I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-560

LIOB-BIP I/O Modul: 20 Universal I/O (IO)

LIOB-562

LIOB-BIP I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

The post LIOB-586/587/588/589 I/O Controller appeared first on Kepler Electronics.

LIOB-593 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:49:13 +0000

LIOB-593 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑593 I/O Controllers are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

Local Operation and Override

All L‑IOB I/‌O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
Room controller for up to 2 room segments
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment,…)
Event-driven e-mail and SMS (requires LTE-800) notification
Math objects to execute mathematical operations on data points
Stores customized graphic pages
Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built-in OPC XML‑DA and OPC UA server
Dual Ethernet/‌IP interface
Access to network statistics
Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller) functionality, BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
Supports IP-852 (Ethernet/ IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP Router including BBMD as well as Slave-Proxy functionality
Alarming, Scheduling, and Trending (AST)
Gateway functions including Smart Auto-Connect
Integrated web server for device configuration and monitoring data points
Stores user-defined project documentation
Connection to EnOcean wireless devices via LENO-80x Interface
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE‑800 Interface
Integration of damper actuator via MP-Bus
8 x Universal I/O (U, I, R), 8 x Universal I/O (U)**
Supports VPN

*requires L-IOT1 software license
**U: 0‑10V input or 0‑10V output, I: 4‑20 mA input, R: resistance measurement

LIOB-593 I/O Controller Products

LIOB-593

L-IOB I/O Controller: 8 x Universal I/O (U, I, R), 8 x Universal I/O (U), 7x Digital Output (DO) (5x Relay 2A, 2x Relay 6A)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

Actuator 3/4‘‘, 5Nm, MP-Bus cable

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-593 I/O Controller appeared first on Kepler Electronics.

LIOB-592 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:48:41 +0000

LIOB-592 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

BACnet/IP over Ethernet

The LIOB‑592 I/O Controllers are equipped with two Ethernet ports, including a built-in Ethernet switch. This allows for building a daisy-chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. LIOB‑592 I/ O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

Local Operation and Override

Features

Automation station with bidirectional I/Os configurable as either input or output
Programmable with L-STUDIO (IEC 61131‑3 or IEC 61499)
Room controller for up to 2 room segments
Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment, …)
Dual Ethernet/ IP interface
Manual operation using the jog dial or VNC client
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Stores customized graphic pages
Visualization of customized graphic pages through LWEB-900 (Building Management), LWEB-803 (Monitoring and Control), or LWEB-802 (Web Browser)
BACnet Client Configuration with configuration tool (scan and EDE import)
Supports IP-852 (Ethernet/ IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
Router including BBMD as well as Slave-Proxy functionality
Alarming, Scheduling, and Trending (AST)
Event-driven e-mail and SMS (requires LTE-800) notification
Math objects to execute mathematical operations on data points
Integrated web server for device configuration and monitoring data points
Gateway functions including Smart Auto-Connect
Access to network statistics
Compliant with CEA-709, CEA-852, and ISO/IEC 14908 Standard (LonMark System)
Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
B-BC (BACnet Building Controller) functionality, BTL certified
BACnet Client Function (Write Property, Read Property, COV Subscription)
Built-in OPC XML‑DA and OPC UA server
Connection to EnOcean wireless devices via LENO-80x Interface
Supports SMI (Standard Motor Interface) through LSMI-804
Supports WLAN through LWLAN-800 Interface
Supports MP-Bus through LMPBUS-804
Supports LTE through LTE-800 Interface
Support of the L-STAT Room Operator Panel
Stores user-defined project documentation
Supports VPN

*requires L-IOT1 software license

LIOB-592 I/O Controller Products

LIOB-592

L-IOB I/O Controller: 40x Universal I/O (12 optionally with 4-20 mA Current Output)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

LMPBUS-804

MP-Bus Interface for 16 devices per channel, up to 4 channels

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LRS232-802

USB to 2x RS-232 Interface

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-592 I/O Controller appeared first on Kepler Electronics.

LIOB-595 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:48:10 +0000

LIOB‑595 I/O Controllers are IP‑enabled, compact, programmable BACnet Building Controller (B‑BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑595 I/O Controllers are equipped with two Ethernet ports, including a built‑in Ethernet switch. This allows for building a daisy-chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network‑wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/ O Controllers implement the BACnet Building Controller (B‑BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, telemetry using MQTT, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast‑based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non‑standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Unitary and Terminal Controller

The LIOB‑595 is designed to efficiently implement unitary and terminal applications in a compact form factor. The integrated differential pressure sensor, its local I/O, and the built‑in MP‑Bus port provide connectivity for all unitary and terminal equipment. In addition, the RS‑485 port allows connection of L‑STAT room operator panels for temperature and air quality measurement and user interaction.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
Room controller for up to 2 room segments
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment,…)
Event‑driven e‑mail and SMS (requires LTE‑800) notification
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B‑BC (BACnet Building Controller), BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/ IEC 14908 Standard (LonMark System)
Supports IP‑852 (Ethernet/ IP)
Support of dynamically created or static NVs
Support of user‑defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
Router including BBMD as well as Slave-Proxy functionality
Math objects to execute mathematical operations on data points
Stores customized graphic pages
Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built‑in OPC XML‑DA and OPC UA server
Dual Ethernet/ IP interface
Access to network statistics
Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Gateway functions including Smart Auto‑Connect
Integrated web server for device configuration and monitoring data points
Connection to EnOcean wireless devices via LENO‑80x Interface
Supports WLAN through LWLAN‑800 Interface
Supports LTE through LTE‑800 Interface
Support of the L‑STAT Room Operator Panel
Stores user‑defined project documentation
Integration of damper actuator via MP‑Bus
Differential pressure sensor
Support VPN

*requires L-IOT1 software license

LIOB-595 I/O Controller Products

LIOB-595

L-IOB I/O Controller: 6x Universal I/O (IO), 4x DO (4x Relay 2A), 1 Pressure Sensor

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-595 I/O Controller appeared first on Kepler Electronics.

LIOB-590 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:47:41 +0000

LIOB‑590 I/O Controllers are IP-enabled, compact, programmable automation stations for LonMark Systems, BACnet/IP and BACnet/SC networks with bidirectional I/Os configurable as either input or output and integrated graphical visualization.

Communication

The LIOB‑590 I/O Controller is equipped with two Ethernet ports including a builtin Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. LIOB‑590 I/O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

Local Operation and Override

All L‑IOB I/O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

Automation station with bidirectional I/Os configurable as either input or output
Programmable with L-STUDIO (IEC 61131‑3 or IEC 61499)
Room controller for up to 2 room segments
Node.js support* for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment, …)
Dual Ethernet/ IP interface
Manual operation using the jog dial or VNC client
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Visualization of customized graphical pages through LWEB-900 (Building Management), LWEB-803 (Monitoring and Control), or LWEB-802 (Web Browser)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Alarming, Scheduling, and Trending (AST)
Event-driven e-mail notification
Integrated web server for device configuration and monitoring data points
Gateway functions including Smart Auto-Connect
Access to network statistics
Compliant with CEA-709, CEA-852, and ISO/ IEC 14908 Standard (LonMark System)
Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet/IP, BACnet/SC
B-BC (BACnet Building Controller) functionality, BTL certified
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
Supports IP-852 (Ethernet/ IP)
Math objects to execute mathematical operations on data points
Built-in OPC XML‑DA and OPC UA server
Stores customized graphical pages
Stores user-defined project documentation

*requires L-IOT1 software license

LIOB-590 I/O Controller Products

LIOB-590

L-IOB I/O Controller: 20x Universal I/O (IO)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-590 I/O Controller appeared first on Kepler Electronics.

LIOB-596 I/O Controller

Maen Sirhan — Wed, 27 Mar 2024 20:47:09 +0000

LIOB-596 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑596 I/O Controllers are equipped with two Ethernet ports, including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

Local Operation and Override

All L‑IOB I/O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
Room controller for up to 2 room segments
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment, …)
Event-driven e-mail and SMS (requires LTE-800) notification
Math objects to execute mathematical operations on data points
Stores customized graphic pages
Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built-in OPC XML‑DA and OPC UA server
Dual Ethernet/IP interface
Access to network statistics
Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller) functionality, BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/IEC 14908 Standard (LonMark System)
Supports IP-852 (Ethernet/ IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP Router including BBMD as well as Slave-Proxy functionality
Gateway functions including Smart Auto-Connect
Integrated web server for device configuration and monitoring data points
Connection to EnOcean wireless devices via LENO-80x Interface
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE‑800 Interface
Support of the L-STAT Room Operator Panel
Stores user-defined project documentation
Integration of damper actuator via MP-Bus
Support VPN

*requires L-IOT1 software license

LIOB-596 I/O Controller Products

LIOB-596

L-IOB I/O Controller: 8x Universal I/O (IO), 6x DO (4x Relay 2A, 2x TRIAC 0.5A)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

Actuator 3/4‘‘, 5Nm, MP-Bus cable

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-596 I/O Controller appeared first on Kepler Electronics.

LIOB-AIR Controller

Maen Sirhan — Sun, 08 Oct 2023 21:00:26 +0000

LIOB-AIR is a fully IP based variable air volume controller (VAV controller) with a predefined, flexible, re-programmable application program and sophisticated management functions for a building ventilation system.

LIOB-585 I/O Controller

Maen Sirhan — Sun, 08 Oct 2023 20:52:41 +0000

Product available through Competence Partner Program
LIOB-585 Datasheet
L-IOB I/O Controller User Manual
LIOB-585 Installation Instructions
L-IOB Device Selector
General I/O Specifications
Certificates: EC / BTL / UL / AMEV / MP-BUS
Downloads

LIOB‑585 I/‌O Controllers are IP-enabled, compact, programmable automation stations for LonMark Systems and BACnet/‌IP networks with physical inputs and outputs and integrated graphical visualization.

Communication

The LIOB‑585 I/ O Controller is equipped with two Ethernet ports including a builtin Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. LIOB‑585 I/ O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

Local Operation and Override

Unitary and Terminal Controller

The LIOB-585 is designed to efficiently implement unitary and terminal applications in a compact form factor. The integrated differential pressure sensor, its local I/O, and the built-in MP-Bus port provide connectivity for all unitary and terminal equipment. In addition, the RS-485 port allows connection of L-STAT room operator panels for temperature and air quality measurement and user interaction.

Features

Automation station with physical inputs and outputs
Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
Room controller for up to 2 room segments
128×64 graphic display with backlight
Local and remote access to information about device status and data points
Manual operation using the jog dial or VNC client
Alarming, Scheduling, and Trending (AST)
Node.js support* for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
Event-driven e-mail notification
Math objects to execute mathematical operations on data points
Stores customized graphical pages
Visualization of customized graphical pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Support of the L‑STAT Room Operator Panel
Built-in OPC XML‑DA and OPC UA server
Dual Ethernet/IP interface
Access to network statistics
Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller) functionality, BTL certified
Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
Supports IP-852 (Ethernet/IP)
Support of dynamically created or static NVs
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP Router including BBMD as well as Slave-Proxy functionality
Gateway functions including Smart Auto-Connect
Integrated web server for device configuration and monitoring data points
Connection to EnOcean wireless devices via LENO-80x Interface
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE‑800 Interface
Stores user-defined project documentation
Integration of damper actuator via MP-Bus
Differential pressure sensor

*requires L-IOT1 software license

LIOB-585 – Video

LIOB-585 I/O Controller Products

LIOB-585

L-IOB I/O Controller: 6 UI, 2 AO, 5 DO (5 x Triac 0.5 A), 1 Pressure Sensor

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

L-ACT-FRAME1

L-ACT-FRAME1, Mounting Frame

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

L-TRIAC16

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LSTAT-810-GX-LX-CU

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-585 I/O Controller appeared first on Kepler Electronics.