DALI Archives - Kepler Electronics https://kepler-elec.com/tag/dali/ LOYTEC COMPETENCE CENTER Wed, 05 Jun 2024 09:29:09 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://kepler-elec.com/wp-content/uploads/1/2023/10/cropped-cropped-cropped-cropped-Kepler-Elec-Logo-2023-09-18-13-45-04-32x32.jpg DALI Archives - Kepler Electronics https://kepler-elec.com/tag/dali/ 32 32 KDALI-RM-1CH https://kepler-elec.com/2024/04/27/kdali-rm-1ch/ Sat, 27 Apr 2024 08:01:24 +0000 https://kepler-elec.com/?p=5434 KDALI-RM-1CH

The post KDALI-RM-1CH appeared first on Kepler Electronics.

]]>
KDALI-RM-1CH

DALI-2 relay module KDALI-RM-1CH

The KDALI-RM-1CH is a DALI-2 relay module which is capable of switching both AC and DC loads.The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.

Key Features

  • DALI-2 relay module
  • 100-240VAC power input
  • 1 DALI address can be assigned by DALI master controller
  • Compatible with DALI and DALI-2 versions
  • Compliant to IEC 62386-208
  • Loads that do not have a DALI input can therefore be integrated in the DALI circuit
  • >1 channel actuator (switch) with DALI-2 input
  • Switching voltage 100-240VAC
  • Mini Size, easy to be Installed into a standard wall box
  • Compliant DALI device type 7
  • 5 years warranty
  • Waterproof grade: IP20

Specification

Part No.Switching VoltagePower inputOutput CurrentType of contactDALI ConsumptionDimension (mm)
KDALI-RM-1CH100-240VAC100-240VAC,
50/60HZ		Resistive load:
max.4.3A
Capacitive load:
max.l.3A
Inductive load:
max.4.3A		1
normally
closed		<3mA45×45.5×20.3

Product DimenDimension

Wiring Diagram

The post KDALI-RM-1CH appeared first on Kepler Electronics.

]]> KDALI-2B-P https://kepler-elec.com/2024/04/24/kdali-2b-p/ Wed, 24 Apr 2024 17:21:24 +0000 https://kepler-elec.com/?p=5339 KDALI-2B-P

The post KDALI-2B-P appeared first on Kepler Electronics.

]]>

DALI-2 Certified 2 Key Push Button Wall Switch KDALI-2B-P

The wall switch KDALI-2B-P is industry first DALI-2 certified DALI-2 control device with 2 push buttons according to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332.The input device supports feedback functionality and provides 4 LEDs. It is suitable for integration and in combination with DALI-2 compliant central control units.The push button device is multimaster capable, multiple modules can installed on the DALI- line. The DALI-2 input device is DALI bus powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.
This DALI-2 push button is designed with standard 55mm frame, and can be compatible with universal 55mm frames

Click KDALI-2B-P Certification Link from DiiA official website to check the wall switch certification details

Key Features

  • DALI-2 Certfied Input Device
  • DALI-2 control device with 2 push buttons
  • According to IEC62386-101, IEC62386-103, IEC62386-301 and IEC62386-332
  • Supports feedback functionality, provides 4 LEDs
  • Suitable for integration and in combination with DALI-2 compliant central control units
  • Multimaster capable, multiple modules can installed on the DALI- line
  • DALI bus powered, no extra power supply required
  • Easy configuration via DALI-2 compliant central controller USB interface
  • Easy installation, compatible with universal 55mm frames

Specification

Wiring Diagram

The post KDALI-2B-P appeared first on Kepler Electronics.

]]> KDALI-PBI https://kepler-elec.com/2024/04/23/kdali-pbi/ Tue, 23 Apr 2024 16:43:18 +0000 https://kepler-elec.com/?p=5211 DALI push button coupler KDALI-PBI

The post KDALI-PBI appeared first on Kepler Electronics.

]]>
KDALI-PBI

DALI Push Button Coupler KDALI-PBI

The DALI push button coupler KDALI-PBI is industry first DALI-2 certified DALI-2 control device with 4 push
buttons according to IEC62386-101, IEC62386-103 and IEC62386-301. This coupler enables to integrate existing push
button switches into DALI circuit and convert the switches into DALI input device. The coupler supports 4 push button
instances. It is suitable for integration and in combination with DALI-2 compliant central control units. The push button
device is multimaster capable, multiple modules can be installed on the DALI- line. The DALI-2 input device is DALI bus
powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.

This DALI push button coupler can be easily installed into existing 55mm wall boxes behind existing push button
switches.

Key Features

  • DALI-2 Certfied Input Device
  • Enables to integrate existing push button switches into DALI circuit and convert the switches into DALI input device
  • DALI-2 control device with 4 push buttons
  • According to IEC62386-101, IEC62386-103 and IEC62386-301
  • Suitable for integration and in combination with DALI-2 compliant central control units
  • Multimaster capable, multiple modules can installed on the DALI- line
  • DALI bus powered, no extra power supply required
  • Easy configuration via DALI-2 compliant central controller USB interface
  • Can easily installed into existing 55mm wall boxes behind existing push button switches

The post KDALI-PBI appeared first on Kepler Electronics.

]]> L-RC1 Infrared Remote Control https://kepler-elec.com/2024/04/02/l-rc1-infrared-remote-control/ https://kepler-elec.com/2024/04/02/l-rc1-infrared-remote-control/#respond Tue, 02 Apr 2024 15:50:39 +0000 https://kepler-elec.com/?p=4133 The L-RC1 is an infrared remote control, optimized for room automation applications. It allows the control of the room’s lights, sunblinds and HVAC system.

The post L-RC1 Infrared Remote Control appeared first on Kepler Electronics.

]]>
L-RC1 Infrared Remote Control

The L-RC1 is an infrared remote control, optimized for room automation applications. It allows the control of the room’s lights, sunblinds and HVAC system.

It supports the individual control for up to two channels – groups of luminaires and blinds – and scene control for up to three scenes.

For HVAC applications the temperature setpoint and fan speed can be adjusted, A/C can be switched on and off and the room’s occupancy status can be changed.

The L-RC1 is designed to work with L-DALI multi-sensors (LDALI-MSx-BT) and L-STAT room operation panels.

Features

  • Infrared remote control optimized for room automation applications
  • Control up to two light channels
  • Control up to two sunblind channels
  • Scene control for up to three scenes
  • Adjust temperature setpoint
  • Adjust fan speed
  • Set occupancy status
  • Switch A/C on/off

L-RC1 Infrared Remote Control Products

L-RC1

L-RC1

Infrared remote control for room automation applications

The post L-RC1 Infrared Remote Control appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-rc1-infrared-remote-control/feed/ 0 LDALI-PWR2-U / LDALI-PWR4-U Power Supply https://kepler-elec.com/2024/04/02/ldali-pwr2-u-ldali-pwr4-u-power-supply/ https://kepler-elec.com/2024/04/02/ldali-pwr2-u-ldali-pwr4-u-power-supply/#respond Tue, 02 Apr 2024 15:49:36 +0000 https://kepler-elec.com/?p=4129 The DALI-2 power supplies LDALI-PWR2-U and LDALI-PWR4-U are used to power two or four DALI channels.

The post LDALI-PWR2-U / LDALI-PWR4-U Power Supply appeared first on Kepler Electronics.

]]>

LDALI-PWR2-U / LDALI-PWR4-U Power Supply
LDALI-PWR4-U

The DALI-2 power supplies LDALI-PWR2-U and LDALI-PWR4-U are used to power two or four DALI channels. Per channel, the power supplies provide a guaranteed supply current of 116 mA to power devices connected to the DALI channel.

In case the DALI devices connected to the channel consume more than the 116 mA, two DALI outputs of the power supplies can be used in parallel, resulting in a guaranteed supply current of 232 mA (maximum supply current of 250 mA).

Installation

The DALI channel is treated to be non-SELV (Safety Extra Low Voltage). Therefore, the relevant installation regulations for low voltage apply. The cable of a DALI channel is either limited to a maximum length of 300 m using a minimum wire cross-section of 1.5 mm² (AWG15) or must ensure a maximal voltage drop of 2 V.

Wide Range Supply Voltage

The power supplies accept a wide range of supply voltage from 85-240 V AC, 50/‌60 Hz. They also feature a starting-current limitation.

DALI Power Outputs

The DALI power outputs provide 18 V (11 V – 20.5 V) and 116 mA. The power outputs are isolated from mains by reinforced insulation. The power outputs are short circuit proof and shut down if thermally overloaded. When a thermal overload occurs, the DALI control lamp switches off.
The LDALI-PWR2-U and LDALI-PWR4-U are DALI-2 certified. 

ldali plus pwr4 U

LDALI-PWR2-U / LDALI-PWR4-U Power Supplies Products

LDALI-PWR2-U

LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

LDALI-PWR4-U

LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

The post LDALI-PWR2-U / LDALI-PWR4-U Power Supply appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-pwr2-u-ldali-pwr4-u-power-supply/feed/ 0 L-DALI: Pushbutton Coupler https://kepler-elec.com/2024/04/02/l-dali-pushbutton-coupler/ https://kepler-elec.com/2024/04/02/l-dali-pushbutton-coupler/#respond Tue, 02 Apr 2024 15:48:43 +0000 https://kepler-elec.com/?p=4121 The LDALI‑BM2 pushbutton coupler integrates up to four customary light push buttons and switches into a DALI channel.

The post L-DALI: Pushbutton Coupler appeared first on Kepler Electronics.

]]>
L-DALI: Pushbutton Coupler

The LDALI‑BM2 pushbutton coupler integrates up to four customary light push buttons and switches into a DALI channel. Alternatively, two of the four inputs can be used as analog inputs to connect devices like sliders, dials or even resistance based sensors like NTC temperature sensors.

Connected pushbuttons or switches can be used to control luminaires and sunblinds using L-DALI lighting controllers or L-ROC room automation controllers. The following functions are available:

  • Dim up, dim down
  • Off
  • On with last dimming value
  • Scene recall: 1–15
  • Dim to a specified value in %
  • Color temperature warmer/colder
  • Activate auto mode
  • Move Sunblind up/down
  • Set area Occupied/Unoccupied

In the mode toggle, the function is carried out depending on the lighting status (toggle switch). Communication and power supply is handled via the DALI bus. The LDALI-BM2 is a DALI-2 certified input device as defined in the IEC 62386 2014 standard and can be integrated into DALI-2 systems of other vendors.

Features

  • Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
  • DALI-2 certified input device as defined in IEC 62386 2014 standard
  • 2 digital inputs (dry contact) for conventional pushbuttons or switches
  • 2 universal inputs (potential free) for conventional pushbuttons, switches, sliders, dials or NTC temperature sensors
  • 4 outputs for direct control of feedback LEDs
  • Multi‑master compatible, up to 64 LDALI‑BM2 pushbutton couplers per DALI channel with sufficient dimensioned bus supply
  • Supplied via the DALI channel, no external power supply is necessary
  • Pre-confectioned wires for connection of inputs
  • Optimized for mounting behind standard switches

L-DALI: Pushbutton Coupler Products

LDALI-BM2

LDALI-BM2

Quadruple DALI pushbutton coupler

The post L-DALI: Pushbutton Coupler appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-dali-pushbutton-coupler/feed/ 0 LDALI-PWR1-U Power Supply https://kepler-elec.com/2024/04/02/ldali-pwr1-u-power-supply/ https://kepler-elec.com/2024/04/02/ldali-pwr1-u-power-supply/#respond Tue, 02 Apr 2024 15:47:49 +0000 https://kepler-elec.com/?p=4125 The LDALI‑PWR1‑U is a DALI power supply for one channel with a guaranteed supply current of 50 mA (maximum supply current of 62 mA.

The post LDALI-PWR1-U Power Supply appeared first on Kepler Electronics.

]]>
LDALI-PWR1-U Power Supply

The LDALI‑PWR1‑U is a DALI power supply for one channel with a guaranteed supply current of 50 mA (maximum supply current of 62 mA).

It is well suited as supply for small standalone DALI‑systems with a limited amount of DALI‑components or even for luminaire integration. A typical LOYTEC application is the supply of a DALI subsystem in a BT‑mesh ecosystem (e.g. for a room), in which the sensor acts as DALI application controller and gateway to the mesh ecosystem. However, the LDALI‑PWR1‑U can also be used only to supply the LOYBT-MSx Bluetooth multisensors.

In applications with higher DALI currents up to 4 LDALI‑PWR1‑U can be used in parallel, resulting in a guaranteed supply current of 200 mA (maximum supply current of 248 mA).

Installation

The DALI channel is treated to be non‑SELV (Safety Extra Low Voltage). Therefore the relevant installation regulations for low voltage apply. The cable of a DALI channel is either limited to a maximum length of 300 m using a minimum wire cross‑section of 1.5 mm² (AWG15) or must ensure a maximal voltage drop of 2 V.

Wide Range Supply Voltage

The power supply accepts a wide range of supply voltage from 85–240 V AC, 50/ 60 Hz, and also features a starting‑current limitation.

DALI Power Output

The DALI power output provides 16 V (11 V – 20.5 V) and 50 mA guaranteed supply current. The power output is isolated from mains by reinforced insulation. The power output is short circuit proof and shuts down if thermally overloaded.

The LDALI‑PWR1‑U is DALI‑2 certified.

LDALI-PWR1-U Power Supply Products

LDALI-PWR1-U

DALI Power Supply for 1 DALI channel, 50mA

DALI-2

DALI-2

The post LDALI-PWR1-U Power Supply appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-pwr1-u-power-supply/feed/ 0 LDALI-RM8 Relay Module https://kepler-elec.com/2024/04/02/ldali-rm8-relay-module/ https://kepler-elec.com/2024/04/02/ldali-rm8-relay-module/#respond Tue, 02 Apr 2024 15:46:15 +0000 https://kepler-elec.com/?p=4118 The LDALI‑RM8 Relay Module enables the control of standard loads via DALI.

The post LDALI-RM8 Relay Module appeared first on Kepler Electronics.

]]>
LDALI-RM8 Relay Module

The LDALI-RM8 Relay Module enables the control of standard loads via DALI. Typical application scenarios are the integration of non‑DALI luminaires or other loads like fans in toilets or washrooms, motors for partition walls or screens and fire protection flaps in DALI lighting applications. The device provides 8 built-in relay contacts, which can be controlled individually via separate DALI addresses as long as the corresponding digital input is open. Closing this input will always switch on the relay (override). Each relay provides a switch that indicates the state and that can be used to switch the relay manually (installation and maintenance). The built-in relay contacts can be used for currents of up to 16 A. They support a wide voltage range of 120 – 277 V AC and up to 30 V DC. The relays are suitable for loads with high inrush currents.

Together with the LOYTEC L-DALI controllers or LROC‑40x room automation controllers, the LDALI-RM8 devices act as programmable switching output modules. The integration of the module in the DALI network follows the same simple steps as the integration of DALI lamps. The device supports the DALI specification IEC 62386‑208 (Device Type 7, “switching function”) for non‑dimmable loads. The LDALI‑RM8 is externally powered either by 24 V DC or 85 – 240 V AC.

As a unique safety feature, the relay state for fault conditions can be partially configured. In case of a power loss on the DALI bus, the relays will switch to the position as defined with the DALI configuration register “System Failure Level”. In case of a power loss on the 24 V DC / 85 – 240 V AC the relays keep their state until a “Power On” occurs, at which they will switch to the state defined in the “Power On Level” configuration register.

The LDALI-RM8 is intended to be used in a switching cabinet.

The LDALI-RM8 is DALI-2 certified.

RM8 diagram

Features

  • Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
  • Device configuration with the free LINX-Configurator or via the built‑in web server of the L‑DALI controller
  • Programmable switching outputs for standard loads in the power grid
  • Relay contact switching voltage: 120 – 277 V AC
  • Suitable for loads with high inrush currents
  • Up to 8 LDALI‑RM8 modules per DALI channel
  • Supplied via 85 – 240 V AC or 24 V DC ±10 %
  • Potential‑free, bi‑stable relay make contact
  • Relay contacts connectable with different phases
  • DALI specification IEC 62386‑208 (Device Type 7 – Switching Function) supported
  • DALI-2 certified
  • Configurable relay positions in case of DALI line outage
  • Relays keep their state in case of power loss
  • Manual switches on device for indication and manual override
  • Digital inputs forcing the corresponding relays to switch on (override, status can be queried)
  • Firmware update over DALI

LDALI-RM8 Relay Module Products

LDALI-RM8

LDALI-RM8

DALI Relay Modul, 8 channel

DALI-2

DALI-2

DALI-2

The post LDALI-RM8 Relay Module appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-rm8-relay-module/feed/ 0 LDALI-RM5 / LDALI-RM6 Relay Modules https://kepler-elec.com/2024/04/02/ldali-rm5-ldali-rm6-relay-modules/ https://kepler-elec.com/2024/04/02/ldali-rm5-ldali-rm6-relay-modules/#respond Tue, 02 Apr 2024 15:45:19 +0000 https://kepler-elec.com/?p=4115 The LDALI‑RM5/RM6 relay module allow integrating non DALI-luminaires or to control other loads with the LDALI-controller.

The post LDALI-RM5 / LDALI-RM6 Relay Modules appeared first on Kepler Electronics.

]]>

The LDALI‑RM5/RM6 Relay Modules enable the control of consumers without DALI interface. Typical application scenarios are the integration of non-DALI luminaires (with 1 – 10V or no control interface) or other loads like fans in toilets or washrooms and motors for partition walls or screens in DALI lighting applications.

The built-in relay contact can be used for currents of up to 10 A or loads of up to 2 500 VA, respectively. It supports a wide voltage range of 120 – 277 V AC and up to 30 V DC. Zero cross switching technology is used to be able to handle the large in-rush currents typically found in lighting applications. For legacy dimmable ballasts, the LDALI-RM modules are also equipped with a 1 – 10 V interface, which can be used together with the relay contact to control these types of loads via DALI.

Together with the LOYTEC DALI controllers or LROC‑40x room automation controllers, the LDALI‑RM modules act as programmable switching output modules. The integration of the module in the DALI network follows the same simple steps as the integration of a DALI lamp. The device supports the DALI specification IEC 62386‑208 (Device Type 7, “switching function”) for non-dimmable loads and the DALI specifications IEC 62386‑206 (Device Type 5, “converter”) for loads dimmable via the 1 – 10 V interface, respectively (max. 50 mA current sink). The LDALI‑RM modules are directly connected to a DALI channel and also supplied with energy by that channel.

As a unique safety feature, the relay state for fault conditions can be configured: In case of a loss of power on the DALI bus, the relay will switch to the position as defined with the DALI configuration register “System Failure Level”.

The LDALI-RM module comes with two housing options: While the LDALI-RM5 is designed for installation in distribution boxes or behind standard plugs in installation boxes, the LDALI-RM6 allows installation on US-style fixtures or junction box ½’’ knockouts (“spud-mount”).

Features

  • Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
  • Device configuration with the free L-INX Configurator or via the built‑in web server of the L-DALI controller
  • Programmable switching output for standard consumers in the power grid
  • Universal voltage support (120 – 277 V AC)
  • Up to 64 LDALI‑RM Relay Modules per DALI channel with sufficient dimensioned bus supply
  • Supplied via the DALI channel
  • Potential‑free, bi-stable relay make contact
  • Analog 1 – 10 V Interface for legacy dimming lamps
  • DALI‑2 certified
  • DALI specification IEC 62386‑208 (Device Type 7 – Switching Function) supported
  • DALI specification IEC 62386‑206 (Device Type 5 – Converter) supported
  • Selection of the desired device type via operating mode (0x0: Switching Function (default); 0x80: Converter)
  • Configurable relay position in case of power loss
  • Zero cross switching function
  • Firmware update via DALI

LDALI-RM5 / LDALI-RM6 Relay Modules Products

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

The post LDALI-RM5 / LDALI-RM6 Relay Modules appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-rm5-ldali-rm6-relay-modules/feed/ 0 LDALI-MS Multi-Sensor  https://kepler-elec.com/2024/04/02/ldali-ms/ https://kepler-elec.com/2024/04/02/ldali-ms/#respond Tue, 02 Apr 2024 15:41:57 +0000 https://kepler-elec.com/?p=4111 The LDALI-MS2-BT/MS3-BT/MS4-BT are DALI-2 certified multi-sensors made for ceiling mounting and featuring Bluetooth beacon functionality

The post LDALI-MS Multi-Sensor  appeared first on Kepler Electronics.

]]> LDALI-MS2-BT / LDALI-MS3-BT / LDALI-MS4-BT Multi-Sensor
LDALI-MS2-BT
LDALI-MS2-BT
LDALI-MS3-BT
LDALI-MS3-BT
LDALI-MS4-BT
LDALI-MS4-BT

The LOYTEC LDALI-MS2-BT/MS3-BT/MS4-BT multi‑sensor performs occupancy detection and measures the illuminance level. It integrates perfectly into the L‑DALI product line of lighting controllers and LROC‑40x room automation controllers. The occupancy sensor uses a passive infrared presence detector and a digital microphone. The sensor is optimized for use in typical office environments where even the small movements of somebody working at a desk and hitting the keyboard have to be detected across the complete detection area.

The LDALI-MS2-BT/MS3-BT provides a presence detection zone diameter of 10.8 m at 3 m mounting height and is ideal to cover a typical office room or an area in an open office space. As well it is suitable for highbay‑applications for mounting heights up to 12 m. The detection area for mounting heights from 5 m to 12 m is 256 m2.

The LDALI-MS4-BT provides a flat lense and the presence detection zone diameter is 7 m at 3 m mounting height.

With the built‑in infrared receiver, the room’s lights, sunblinds and HVAC system can be controlled via the optionally available IR remote control L-RC1. In addition to occupancy and illuminance sensors, the LDALI-MS2-BT/MS3-BT/MS4-BT comes with integrated temperature and humidity sensors. In room automation applications, those values can used to calculate the current dew point. On the back of the sensor, there is a connector for three digital inputs, allowing to connect conventional switches and push‑buttons, window contacts, dew point sensor, etc. This feature not only saves on additional hardware, but also significantly reduces wiring costs, as the inputs can be wired inside the room and wires no longer have to be pulled to the I/O modules in the switching cabinet.

Furthermore, the LDALI-MS2-BT/MS3-BT/MS4-BT can transmit all supported beacon types (iBeacon, Eddystone UID beacon or manufacturer specific LOYTEC beacon) for indoor localization.

The LDALI-MS2-BT comes with three mounting options: It can be mounted in‑wall in standard flush‑mounted boxes, spring snap in false ceilings and on‑wall with the included surface mounting box. The LDALI-MS3-BT/MS4-BT is designed to be used with spring snaps in false ceilings.

Communication and power supply is handled via the DALI bus. The LDALI-MS2-BT/MS3-BT/MS4-BT is a DALI-2 certified multi‑sensor as defined in the IEC 62386 (2014) standard and can integrated into DALI‑2 systems of other vendors.

Features

  • Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers with a special focus on lighting control and reducing energy costs
  • DALI-2 certified input device, according to IEC 62386-101, IEC 62386-103, IEC 62386-301, IEC 62386-303 and IEC 62386-304
  • High sensitivity occupancy detection – dual technology (PIR and acoustic, separate sensitivity parameter for each technology, sensitivity adjustable), optimized for office applications
  • Lux level measurements
  • Built-in infrared receiver for optional infrared remote control L-RC1
  • Temperature sensor
  • Humidity sensor
  • 3 digital inputs (dry contact)
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking and access to LWEB-900 room control solution
  • The LDALI-MS3/MS4-BT can mounted directly in false ceilings (spring mount included).
  • The LDALI‑MS2-BT can mounted in a flush-mounted box, directly in false ceilings (spring mount included) or on-wall (mounting kit LOYMS2-OW must ordered separately).
  • Multi-master compatible, up to 16 LDALI-MS2-BT/MS3-BT/MS4-BT sensors per DALI channel given a sufficiently dimensioned bus supply
  • Supplied via the DALI bus, no external power supply required
  • Sensor head of the LDALI-MS2-BT/MS3-BT can tilted up to ±15° vertically
  • Flat lense in LDALI-MS4-BT type
  • Firmware update via DALI
LDALI MS2 BT LDALI MS4 BT mounting options

LDALI-MS2-BT / LDALI-MS3-BT / LDALI-MS4-BT Multi-Sensors Products

LDALI-MS2-BT

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS3-BT

LDALI-MS3-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LOYMS2-OW

LOYMS2-OW

LOYMS2-OW, On-wall Surface Mounting Box Kit for LDALI-MS2-BT / LOYBT-MS2 (8 boxes per package), expected availability Q2 2024

L-RC1

L-RC1

Infrared remote control for room automation applications

The post LDALI-MS Multi-Sensor  appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-ms/feed/ 0 LDALI-PD1 Phase-Cut Dimmer Module https://kepler-elec.com/2024/04/02/ldali-pd1-phase-cut-dimmer-module/ https://kepler-elec.com/2024/04/02/ldali-pd1-phase-cut-dimmer-module/#respond Tue, 02 Apr 2024 15:20:02 +0000 https://kepler-elec.com/?p=4108 The LDALI‑PD1 module enables the control of phase‑cut dimmed consumers via a DALI channel.

The post LDALI-PD1 Phase-Cut Dimmer Module appeared first on Kepler Electronics.

]]>

LDALI-PD1 Phase-Cut Dimmer Module

The LDALI‑PD1 module enables the control of phase‑cut dimmed consumers via a DALI channel. Typical application scenarios are the integration of 230V LED-retrofit‑bulbs or halogen lamps in DALI lighting applications.

The device supports a wide voltage range from 220‑240 V AC 50/60Hz. The LDALI‑PD1 is suitable for loads from 1VA up to 150VA. The load type (RL/RC) is automatically detected and used to select a suitable dimming‑method (leading or trailing edge phase‑cut). The dimming range is 3%‑100%.

The integration of the module in the DALI network follows the same simple steps as the integration of a DALI lamp. The device supports the DALI‑specification IEC 62386‑205 (Device Type 4, “Incandescent lamp”). The LDALI‑PD1 modules are directly connected to a DALI‑channel and also supplied with energy by that channel. Thus in case of a system failure the intended state of the output is off.

The LDALI‑PD1 is equipped with an open‑circuit detection that indicates a lamp failure if no load is connected.

The LDALI‑PD1 is designed for installation in distribution boxes or behind standard plugs in installation boxes.

Features

  • Easy integration into LOYTEC L-DALI lighting system and LROC-40x room automation controllers
  • Device configuration with the free LINX Configurator or via the built-in web server of the L-DALI controller
  • Dimmable built-in phase-cut dimmer
  • Automatic load detection and selection of leading or trailing edge phase-cut dimming
  • Suitable for phase-cut dimmed consumers like dimmable retrofit LED and CFL lamps, halogen lamps, …
  • Wide range voltage support (220‑240 V AC 50/60Hz)
  • Up to 64 LDALI‑PD1 modules per DALI channel with sufficient dimensioned bus supply
  • Supplied via DALI channel
  • Electrically isolated between DALI and mains
  • Open circuit detection
  • DALI specification IEC 62386‑102 and IEC 62386‑205 supported
  • Firmware update via DALI

LDALI-PD1 Phase-Cut Dimmer Module Products

LDALI-PD1

DALI Phase-Cut Dimmer Module

DALI-2

The post LDALI-PD1 Phase-Cut Dimmer Module appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-pd1-phase-cut-dimmer-module/feed/ 0 LDALI-PWM4 PWM Modules https://kepler-elec.com/2024/04/02/ldali-pwm4-pwm-modules/ https://kepler-elec.com/2024/04/02/ldali-pwm4-pwm-modules/#respond Tue, 02 Apr 2024 15:17:53 +0000 https://kepler-elec.com/?p=4105 The LDALI-PWM4-x is a 4 channel constant voltage LED driver suitable for constant voltage LED modules and LED strips.

The post LDALI-PWM4 PWM Modules appeared first on Kepler Electronics.

]]>

LDALI-PWM4 PWM Modules

The LDALI-PWM4-x is a 4 channel constant voltage LED driver. It is suitable for constant voltage LED modules and LED strips with operating voltages from 12 to 24 V DC.

The module provides a wide dimming range from 0.1% to 100% and adjustable PWM frequency (125/250/500 Hz). The maximum load is limited by 3 A per channel. The module provides overtemperature protection as well as open- and short-circuit-protection for each channel.

From a DALI perspective, the channels can be controlled independently via separate DALI addresses. The LDALI-PWM4 module is compliant to the DALI specifications IEC 62386-101, IEC 62386-102 and IEC 62386-207 (Device Type 6,“LED”). Separate module types for tunable white (LDALI-PWM4-TC) and colour control applications (LDALI-PWM4-RGBW) support the DALI specification IEC 62386-209 (Device Type 8, “Colour Control”).

Features

  • Easy integration into LOYTEC L-DALI lighting systems and LROC-40x room automation controllers
  • Device configuration with the free LINX Configurator or via the built-in web server of the L-DALI controller
  • Dimmable built-in constant voltage DALI LED driver
  • Suitable for constant voltage LED modules and LED strips
  • LDALI-PWM4: 4 PWM channels, each of which can be controlled independently via separate DALI addresses
  • LDALI-PWM4-TC: 4 PWM channels, 2 of which are controlled via a DALI address (DT8 – Mode Tc), perfectly suited for tunable white luminaires
  • LDALI-PWM4-RGBW: 4 PWM channels, controlled via a common DALI address (DT8 – Mode RGBWAF)
  • Maximum current of 3 A per channel
  • Dimming range from 0.1% to 100%
  • Adjustable PWM frequency: 125 / 250 (default) / 500 Hz
  • Externally powered, supply voltage 12 to 24 V DC according to the operating voltage of the LED modules
  • High efficiency and low standby power consumption
  • Overtemperature, Open- and Short-circuit protection
  • DALI-2 certified, supporting IEC 62386-101, IEC62386-102, IEC 62386-207 and IEC 62386-209
  • Firmware update via DALI

LDALI-PWM4 PWM Modules Products

LDALI-PWM4

LDALI-PWM4 PWM

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-RGBW

LDALI-PWM4 PWM

PWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

LDALI-PWM4 PWM

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

The post LDALI-PWM4 PWM Modules appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/ldali-pwm4-pwm-modules/feed/ 0