Buildings Archives - Kepler Electronics

KZIG-G-xG Touch Panels G Series

Maen Sirhan — Mon, 22 Apr 2024 09:31:23 +0000

High-end Intelligent Touch Panels 220 VAC I Zigbee I Modbus RS485

Product introduction

A hotel room intelligent doorplate that integrates room number display and service status (room number, doorbell, cleaning, do not disturb,), easy to install, simple to operate, widely used in hotels, motels and other places, also can be used in flats, villas, hospitals, KTV, restaurants, offices and other places.

High touch sensitivity keys with different colored LED backlighting. Different colors for different service requests, red-do not disturb, green-clean up, orange- check in, blue-doorbell, etc. Also available with LED colors on request.

Technical parameters

Input voltage	Communication protocol	Baud rate	Control mode	Fixing screw centre distance	Operating temperature	Operating humidity
12-36V DC	RS485 Modbus	9600/19200, 8 data bits, no parity, 1 stop bit	capacitive touch	60mm	-10°c ~ 60°C	O – 95%

Suitable for any card
Suitable for 13.56MHz High
Frenquency cards
2 energy saving switches
available

PRECISION CRAFTED – MATCH AS YOU LIKE
The consistency and standardized structure of the panel’s appearance, its simple yet uncomplicated, robust profile and modular and flexible design can be used with a wide range of scenarios.

FULL SCREEN TEMPERED GLASS PANEL
The panel is made of 4mm toughened glass and is available in a variety of colors, supporting customized icons and text.

Musical bells
A choice of 36 built-in 8-chord ringtones with 5 adjustable volume levels. Compared to traditional mechanical bells, it provides a more
pleasant ring ing sound. The LED indicator on the front flashes when the bell rings, which is very convenient and practical for those with hearing impairments.
Intelligent temperature control
This panel is used for thermostatic control, LCD digital display, with power on/off button, fan speed and temperature adjustment, with
customizable icons.

HOTEL/ SMART HOME APPLICATION SYSTEM SOLUTION
The backend office control system uses a B/S architecture. On the mobile platform (tablet/phone) it can verify information (check-in/SOS/service/cleaning etc.) and modify the debugging backend. The front computer only needs to access a web page; no other software
needs to installed to view the room dynamics instantly

Hotel room intelligent control system composition diagram

CD Room intelligent control host
All control panels of guest rooms (including lighting control, air conditioning, dimming, service control, etc.)
Guest room door display, energy saving switch, door bell, door magnet, infrared etc.
Network support (including selected 485 bus or TCP /P Ethernet) products and computer equipment
Collect all room information and send information to the intelligent system software
Apple lpad, IPHONE, Android phones and tablets, visitor image display lights

KEPLER G SERIES KZIG-G-xG Products

Access Control Doorplate

Waterproof doorplate

Electronic Doorplate (Black)

Small door display

The post KZIG-G-xG Touch Panels G Series appeared first on Kepler Electronics.

LIOB-FT I/O Modules LonMark

Maen Sirhan — Tue, 02 Apr 2024 16:36:48 +0000

The LIOB-15x Modules are LonMark certified and communicate over TP/FT-10 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LIOB-FT Mode

The LIOB-15x Modules can be switched to LIOB-FT mode using manual local operation. In LIOB-FT mode, the LIOB-15x Modules extend L-INX Automation Servers and L-ROC Room Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L-IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

I/O module with physical inputs and outputs
SNVT-based interface for integration on the LonMark TP/FT-10 channel
LonMark certified
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Compliant with CEA‑709 and ISO/IEC 14908-2 standard (LonMark System)
Connected to the L-INX Automation Server or L-ROC Room Controller via LIOB‑FT
Automatic integration into device configurations with L-INX and L-ROC
Easy device replacement without any additional software
LNS plug‑in for the device configuration in the LonMark System

LIOB-FT I/O Modules LonMark Products

LIOB-150

LIOB-FT I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-151

LIOB-FT I/O Module: 8 UI, 12 DI

LIOB-152

LIOB-FT I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-153

LIOB-FT I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-154

LIOB-FT I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-FT I/O Modules LonMark appeared first on Kepler Electronics.

L-STUDIO 3 Engineering Tool

Maen Sirhan — Tue, 02 Apr 2024 16:28:06 +0000

L‑STUDIO 3

L-STUDIO is the ultimate development and integration platform for programmable LOYTEC controllers, such as the L-INX automation servers, L-ROC room control system or programmable visualization solutions such as the LPAD-7. It combines the major building automation disciplines -programming, communication, and visualization – into a single tool. Together with the LWEB-900 building management system, it covers all phases of building automation, from prototyping to programming, configuration, and maintenance.

Achieving the highest levels of energy-efficiency and room comfort is only possible by forging all conventional controls into a single integrated building automation application. L-STUDIO helps to develop these applications in a timely and cost-effective manner. Template -based prototyping, reusable libraries and integrated testing tools support the project engineer’s efforts.

Programming

L-STUDIO speaks your language, ranging from the industry-proven PLC language IEC 61131 and its event-based successor IEC 61499 up to modern IoT applications using Node.js and Node-RED.

Using the cycle-based IEC 61131 language, classic applications such as boiler plants, air handling units or heating/cooling circuits can be easily automated. The LOYTEC building automation library already contains many sample applications that can be used as a starting point for your application.

Room control applications can be implemented using the LOYTEC L -ROC room automation library. It provides an integrated solution for HVAC, lighting, and sunblinds solution as well as many other functions required in the modern living space. The room automation library uses the IEC 61499 event -based language to create low -latency and fully networked applications that eliminate the need for classical network integration.

Communication

In L-STUDIO logic blocks, called CATs, can contain technology objects, such as BACnet objects or OPC tags as templates. Data points are then automatically created when a CAT is instantiated on a device. This makes the creating of network interfaces of different technologies almost automatic. A CAT can also contain technology level objects, such as alarms, schedules or trends which are also automatically instantiated and linked to the logic program. The L-STUDIO CATs support all LINX automation server technologies: BACnet, OPC XML/DA, Bluetooth, DALI, EnOcean, SMI, CEA -709, KNX, Modbus, M -Bus and will support future technologies yet to come.

State-of-the-art buildings require Internet of Things services, such as public trans ‑ port information, office booking systems or building information systems. These can be integrated using Node.js or Node-RED. Their integration allows classical PLC programming to be combined with latest web technologies.

Visualization

L-STUDIO CATs can also contain graphical symbols. These visualize the data points of the CAT and represent the logic object in a graphical way, such as a pump diagram, a room overview, or an entire plant display.

These symbols can be combined into graphical projects that can be used on L -VIS or L -PAD devices. The graphical projects can also be used on a PC with LWEB 802/803 or on mobile devices using the LWEB-APP. All visualizations are fully editable by the user and support all features of the L -VIS technology.

Management

L-STUDIO projects can be imported into LWEB -900. All devices and graphical views are imported automatically. The parameter views of LWEB -900 allow to configure and optimize the devices that have been created by L-STUDIO. The graphical views can be used in LWEB-900 together with the access control functions to provide the building maintainers and end-users with a secure and consistent interface to the building.

L-STUDIO provides documentation and versioning features to keep track of the project. All library blocks can be documented in HTML-style. Libraries can also be versioned, distributed in binary form or managed in a source versioning tool to track and document changes.

L-STUDIO 3 Engineering Tool Products

L-STUDIO

Device configuration and programming suite

LTRAIN-LSTUDIO

L-STUDIO Training (2 days)

The post L-STUDIO 3 Engineering Tool appeared first on Kepler Electronics.

L-ACT Actuators

Maen Sirhan — Tue, 02 Apr 2024 16:24:38 +0000

Features

Air damper size up to approximately 1 m², 10.76 ft ²
Torque motor 5 Nm, 45in-lb
Nominal voltage AC/DC 24 V
Communication via Belimo MP-Bus

L-ACT Actuators

L-ACT101-MP

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

Actuator 3/4‘‘, 5Nm, MP-Bus cable

L-ACT-FRAME1

L-IOB I/O Controller: 6 UI, 2 AO, 5 DO (5 x Triac 0.5 A), 1 Pressure Sensor

LIOB-585

L-IOB I/O Controller: 6 UI, 2 AO, 5 DO (5 x Triac 0.5 A), 1 Pressure Sensor

The post L-ACT Actuators appeared first on Kepler Electronics.

LOYRTU-485 Modbus Remote I/O Communication Module

Maen Sirhan — Tue, 02 Apr 2024 16:15:32 +0000

The LOYRTU-485 is a Modbus remote I/O communication module to remote-control Slim series DI/DO and AI/AO extension units. The RTU-485 is a standard Modbus slave compatible with LOYTEC devices featuring a Modbus Interface supporting Modbus master mode.

The LOYRTU-485 is UL, CE, and FCC certified.

Features

Supports Modbus protocol, slave mode
Connects up to 8 DVP-S series I/O modules
Max. baudrate: 115.2k bpsk

LOYRTU-485 Modbus Remote I/O Communication Module Products

LOYRTU-485

Modbus Remote I/O Communication Module

The post LOYRTU-485 Modbus Remote I/O Communication Module appeared first on Kepler Electronics.

LBOX-600 System Distribution Box

Maen Sirhan — Tue, 02 Apr 2024 16:11:19 +0000

With L-BOX System Distribution Boxes, LOYTEC offers the possibility of a decentralized installation of hardware components, e.g. for the flexible room automation system L-ROC.

For the typical requirements of room automation projects with reoccurring segments, the hardware designed for a certain amount of segments (e.g. 8 or 16 segments, usually I/O modules) can be installed in L-BOX. L-BOX is normally mounted in an intermediate ceiling or double floor. The cabling of the field components in the segment (sunblind motor, actuators for valves, window contacts etc.) can be connected to the L-BOX in a star topology. In the L-BOX, the cables are strain-relieved and directly wired to the I/O modules.

LBOX-600 System Distribution Box Products

LBOX-600

L-BOX System Distribution Box for room automation components, 600 x 250 x 82 (L x W x H in mm)

The post LBOX-600 System Distribution Box appeared first on Kepler Electronics.

L-POW Power Supply

Maen Sirhan — Tue, 02 Apr 2024 16:09:54 +0000

LPOW-2415x/2460B Datasheet
LOYTEC Device User Manual
Installation Instructions: LPOW-2415A / LPOW-2415B / LPOW-2460B
Certificates: EC / UL
Downloads: LPOW-2415A / LPOW-2415B / LPOW-2460B

LPOW-2415A

LPOW-2415A is used to supply power to LOYTEC devices with the LOYTEC LIOB‑Connect side outlet such as the L-INX Automation Servers, L-ROC Room Controller, L-GATE Universal Gateways and LIP-ME204. In addition, L-IOB I/O Modules and Controllers (except LIOB-585) can be powered by the LPOW-2415A.

LPOW-2415B

The power supply LPOW-2415B provides 24 V DC via a plug-in screw terminal. It is used to supply power to LOYTEC devices with a separate power terminal of 24 V DC.

Energy -Efficient

The LPOW-2415 are highly efficient switching power supplies. Their efficiency is approximately 80 %. The input voltage range of 85–240 V AC (50–60 Hz) allows worldwide use.

LPOW-2460B

The LPOW‑2460B power supply provides 24 V DC and maximum 60 W with screw terminals. It is used to supply power to LOYTEC devices with a separate power terminal of 24 V DC.

L-POW Power Supply Products

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LPOW-2460B

Power supply unit with power connector 24 V DC, 60 W

The post L-POW Power Supply appeared first on Kepler Electronics.

LOYUNO-L UNOlite Indoor Air Quality Sensor

Maen Sirhan — Tue, 02 Apr 2024 16:02:55 +0000

LOYUNO-L represents the pinnacle of indoor air quality monitoring, purposefully designed for effortless integration with BAS/BMS systems. This advanced instrument detects and analyses a wide range of indoor air quality factors, including Ultra-fine, Fine, and Standard Suspended Particulates (PM1, PM2.5, and PM10), Carbon Dioxide (CO₂), Total Volatile Organic Compounds (TVOC), while also monitoring Temperature and Humidity levels.

LOYUNO-L ensures accurate data, serving as a vital component in achieving LEED green or WELL certification for your building. Rigorously tested and certified for its precise sensing capabilities in detecting PM2.5, CO₂, and TVOC, LOYUNO-L meets the stringent standards set by WELL v2.

LOYUNO-L comes equipped with LOYTEC Bluetooth Mesh capabilities, seamlessly integrating with the other Bluetooth Mesh enabled devices. This versatile compatibility makes LOYUNO-L equally well-suited for both new construction projects and retrofitting BAS/BMS systems.

Features

Multiple IAQ monitors (PM1, PM2.5, PM10, CO₂, TVOC, Temperature, Humidity)
Supports BACnet MS/TP and Modbus RTU
Meets Q1 2022, v2 WELL A08 Requirements
Bluetooth Mesh based sensor
LEDs for optical air quality feedback and status indication
Easy integration on Bluetooth Mesh enabled LOYTEC devices (e.g. LPAD-7)
RESET Grade B Accredited Monitor

LOYUNO-L UNOlite Indoor Air Quality Sensor Products

LOYUNO-L

UNOlite Indoor Air Quality Sensor

The post LOYUNO-L UNOlite Indoor Air Quality Sensor appeared first on Kepler Electronics.

L-RC1 Infrared Remote Control

Maen Sirhan — Tue, 02 Apr 2024 15:50:39 +0000

The L-RC1 is an infrared remote control, optimized for room automation applications. It allows the control of the room’s lights, sunblinds and HVAC system.

It supports the individual control for up to two channels – groups of luminaires and blinds – and scene control for up to three scenes.

For HVAC applications the temperature setpoint and fan speed can be adjusted, A/C can be switched on and off and the room’s occupancy status can be changed.

The L-RC1 is designed to work with L-DALI multi-sensors (LDALI-MSx-BT) and L-STAT room operation panels.

Features

Infrared remote control optimized for room automation applications
Control up to two light channels
Control up to two sunblind channels
Scene control for up to three scenes
Adjust temperature setpoint
Adjust fan speed
Set occupancy status
Switch A/C on/off

L-RC1 Infrared Remote Control Products

L-RC1

Infrared remote control for room automation applications

The post L-RC1 Infrared Remote Control appeared first on Kepler Electronics.

LDALI-PWR2-U / LDALI-PWR4-U Power Supply

Maen Sirhan — Tue, 02 Apr 2024 15:49:36 +0000

L-FOCUS: L-DALI Lighting Control Solutions (English)
LDALI-PWRx-U Datasheet
L-DALI User Manual
LDALI-PWRx-U Installation Instructions
Certificates: EC / DALI-2 / UL
Downloads

The DALI-2 power supplies LDALI-PWR2-U and LDALI-PWR4-U are used to power two or four DALI channels. Per channel, the power supplies provide a guaranteed supply current of 116 mA to power devices connected to the DALI channel.

In case the DALI devices connected to the channel consume more than the 116 mA, two DALI outputs of the power supplies can be used in parallel, resulting in a guaranteed supply current of 232 mA (maximum supply current of 250 mA).

Installation

The DALI channel is treated to be non-SELV (Safety Extra Low Voltage). Therefore, the relevant installation regulations for low voltage apply. The cable of a DALI channel is either limited to a maximum length of 300 m using a minimum wire cross-section of 1.5 mm² (AWG15) or must ensure a maximal voltage drop of 2 V.

Wide Range Supply Voltage

The power supplies accept a wide range of supply voltage from 85-240 V AC, 50/‌60 Hz. They also feature a starting-current limitation.

DALI Power Outputs

The DALI power outputs provide 18 V (11 V – 20.5 V) and 116 mA. The power outputs are isolated from mains by reinforced insulation. The power outputs are short circuit proof and shut down if thermally overloaded. When a thermal overload occurs, the DALI control lamp switches off.
The LDALI-PWR2-U and LDALI-PWR4-U are DALI-2 certified.

LDALI-PWR2-U / LDALI-PWR4-U Power Supplies Products

LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

The post LDALI-PWR2-U / LDALI-PWR4-U Power Supply appeared first on Kepler Electronics.

L-DALI: Pushbutton Coupler

Maen Sirhan — Tue, 02 Apr 2024 15:48:43 +0000

L-FOCUS: L-DALI Lighting Control Solutions (English)
LDALI-BM2 Datasheet
L-DALI User Manual
LDALI-BM2 Installation Instructions
Certificates: EC / DALI-2
Downloads

The LDALI‑BM2 pushbutton coupler integrates up to four customary light push buttons and switches into a DALI channel. Alternatively, two of the four inputs can be used as analog inputs to connect devices like sliders, dials or even resistance based sensors like NTC temperature sensors.

Connected pushbuttons or switches can be used to control luminaires and sunblinds using L-DALI lighting controllers or L-ROC room automation controllers. The following functions are available:

Dim up, dim down
Off
On with last dimming value
Scene recall: 1–15
Dim to a specified value in %
Color temperature warmer/colder
Activate auto mode
Move Sunblind up/down
Set area Occupied/Unoccupied

In the mode toggle, the function is carried out depending on the lighting status (toggle switch). Communication and power supply is handled via the DALI bus. The LDALI-BM2 is a DALI-2 certified input device as defined in the IEC 62386 2014 standard and can be integrated into DALI-2 systems of other vendors.

Features

Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
DALI-2 certified input device as defined in IEC 62386 2014 standard
2 digital inputs (dry contact) for conventional pushbuttons or switches
2 universal inputs (potential free) for conventional pushbuttons, switches, sliders, dials or NTC temperature sensors
4 outputs for direct control of feedback LEDs
Multi‑master compatible, up to 64 LDALI‑BM2 pushbutton couplers per DALI channel with sufficient dimensioned bus supply
Supplied via the DALI channel, no external power supply is necessary
Pre-confectioned wires for connection of inputs
Optimized for mounting behind standard switches

L-DALI: Pushbutton Coupler Products

LDALI-BM2

Quadruple DALI pushbutton coupler

The post L-DALI: Pushbutton Coupler appeared first on Kepler Electronics.

LDALI-PWR1-U Power Supply

Maen Sirhan — Tue, 02 Apr 2024 15:47:49 +0000

L-FOCUS: L-DALI Lighting Control Solutions (English)
LDALI-PWR1-U Datasheet
L-DALI User Manual
LDALI-PWR1-U Installation Instructions
Certificates: EC / DALI-2
Downloads

The LDALI‑PWR1‑U is a DALI power supply for one channel with a guaranteed supply current of 50 mA (maximum supply current of 62 mA).

It is well suited as supply for small standalone DALI‑systems with a limited amount of DALI‑components or even for luminaire integration. A typical LOYTEC application is the supply of a DALI subsystem in a BT‑mesh ecosystem (e.g. for a room), in which the sensor acts as DALI application controller and gateway to the mesh ecosystem. However, the LDALI‑PWR1‑U can also be used only to supply the LOYBT-MSx Bluetooth multisensors.

In applications with higher DALI currents up to 4 LDALI‑PWR1‑U can be used in parallel, resulting in a guaranteed supply current of 200 mA (maximum supply current of 248 mA).

Installation

The DALI channel is treated to be non‑SELV (Safety Extra Low Voltage). Therefore the relevant installation regulations for low voltage apply. The cable of a DALI channel is either limited to a maximum length of 300 m using a minimum wire cross‑section of 1.5 mm² (AWG15) or must ensure a maximal voltage drop of 2 V.

Wide Range Supply Voltage

The power supply accepts a wide range of supply voltage from 85–240 V AC, 50/ 60 Hz, and also features a starting‑current limitation.

DALI Power Output

The DALI power output provides 16 V (11 V – 20.5 V) and 50 mA guaranteed supply current. The power output is isolated from mains by reinforced insulation. The power output is short circuit proof and shuts down if thermally overloaded.

The LDALI‑PWR1‑U is DALI‑2 certified.

LDALI-PWR1-U Power Supply Products

LDALI-PWR1-U

DALI Power Supply for 1 DALI channel, 50mA

DALI-2

The post LDALI-PWR1-U Power Supply appeared first on Kepler Electronics.