Smart 32-Ch Relay Module, Modbus RS485 Interface, With Multiple Isolation Protection Circuits

KMOD-RM32 is an industrial 32-ch relay module controlled via RS485 bus, adopts Modbus RTU protocol, built-in protection circuits such as power supply isolation, magnetically isolation, resettable fuse, and TVS diode, etc, It also comes with an ABS case.

Product Specifications

The post KMOD-RM32 appeared first on Kepler Electronics.

DIN Rail 4 Channles DALI-2 Relay KDALI-RM-4CH

The KDALI-RM-4CH is a DALI-2 4 channels relay module with zero crossing detection powerd by DALI bus.4 DALI addresses can be assigned by DALI master controller automatically

Key Features

• DALI relay module with zero crossing detectio
• DIN rail installation
• 100-240VAC power supply
• 4 channels relay module
• DALI addresses can be assigned by DALI master controller automatically
• Control 4 relays separately
• Control of 4 standard contactors
• DIN rail relay module for controlling 4 standard contactors via DALI
• Loads that do not have a DALI input can therefore be integrated in the DALI circuit
• The loads can be switched on and off via DAL
• Compatible with universal DALI systems and master controllers in the market
• DIN rail installation, compatible with standard 35mm DIN rail
• years warranty
• Waterproof grade: IP20

Specification

Product Dimension

Wiring Diagram

The post KDALI-RM-4CH appeared first on Kepler Electronics.

DALI-2 relay module KDALI-RM-1CH

The KDALI-RM-1CH is a DALI-2 relay module which is capable of switching both AC and DC loads.The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads.

Key Features

• DALI-2 relay module
• 100-240VAC power input
• 1 DALI address can be assigned by DALI master controller
• Compatible with DALI and DALI-2 versions
• Compliant to IEC 62386-208
• Loads that do not have a DALI input can therefore be integrated in the DALI circuit
• >1 channel actuator (switch) with DALI-2 input
• Switching voltage 100-240VAC
• Mini Size, easy to be Installed into a standard wall box
• Compliant DALI device type 7
• 5 years warranty
• Waterproof grade: IP20

Specification

Product DimenDimension

Wiring Diagram

The post KDALI-RM-1CH appeared first on Kepler Electronics.

The LDALI-RM8 Relay Module enables the control of standard loads via DALI. Typical application scenarios are the integration of non‑DALI luminaires or other loads like fans in toilets or washrooms, motors for partition walls or screens and fire protection flaps in DALI lighting applications. The device provides 8 built-in relay contacts, which can be controlled individually via separate DALI addresses as long as the corresponding digital input is open. Closing this input will always switch on the relay (override). Each relay provides a switch that indicates the state and that can be used to switch the relay manually (installation and maintenance). The built-in relay contacts can be used for currents of up to 16 A. They support a wide voltage range of 120 – 277 V AC and up to 30 V DC. The relays are suitable for loads with high inrush currents.

Together with the LOYTEC L-DALI controllers or LROC‑40x room automation controllers, the LDALI-RM8 devices act as programmable switching output modules. The integration of the module in the DALI network follows the same simple steps as the integration of DALI lamps. The device supports the DALI specification IEC 62386‑208 (Device Type 7, “switching function”) for non‑dimmable loads. The LDALI‑RM8 is externally powered either by 24 V DC or 85 – 240 V AC.

As a unique safety feature, the relay state for fault conditions can be partially configured. In case of a power loss on the DALI bus, the relays will switch to the position as defined with the DALI configuration register “System Failure Level”. In case of a power loss on the 24 V DC / 85 – 240 V AC the relays keep their state until a “Power On” occurs, at which they will switch to the state defined in the “Power On Level” configuration register.

The LDALI-RM8 is intended to be used in a switching cabinet.

The LDALI-RM8 is DALI-2 certified.

Features

• Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
• Device configuration with the free LINX-Configurator or via the built‑in web server of the L‑DALI controller
• Programmable switching outputs for standard loads in the power grid
• Relay contact switching voltage: 120 – 277 V AC
• Suitable for loads with high inrush currents
• Up to 8 LDALI‑RM8 modules per DALI channel
• Supplied via 85 – 240 V AC or 24 V DC ±10 %
• Potential‑free, bi‑stable relay make contact
• Relay contacts connectable with different phases
• DALI specification IEC 62386‑208 (Device Type 7 – Switching Function) supported
• DALI-2 certified
• Configurable relay positions in case of DALI line outage
• Relays keep their state in case of power loss
• Manual switches on device for indication and manual override
• Digital inputs forcing the corresponding relays to switch on (override, status can be queried)
• Firmware update over DALI

LDALI-RM8 Relay Module Products

LDALI-RM8

DALI Relay Modul, 8 channel

• Contact Sales for quote request
• Documentation and Software

DALI-2

DALI-2

The post LDALI-RM8 Relay Module appeared first on Kepler Electronics.

• L-FOCUS: L-DALI Lighting Control Solutions (English)
• LDALI-RM5/RM6 Datasheet
• L-DALI User Manual
• LDALI-RM5 Installation Instructions
• LDALI-RM6 Installation Instructions
• Certificates: EC / DALI-2 / UL 
• Downloads

Features

• Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers
• Device configuration with the free L-INX Configurator or via the built‑in web server of the L-DALI controller
• Programmable switching output for standard consumers in the power grid
• Universal voltage support (120 – 277 V AC)
• Up to 64 LDALI‑RM Relay Modules per DALI channel with sufficient dimensioned bus supply
• Supplied via the DALI channel
• Potential‑free, bi-stable relay make contact
• Analog 1 – 10 V Interface for legacy dimming lamps
• DALI‑2 certified
• DALI specification IEC 62386‑208 (Device Type 7 – Switching Function) supported
• DALI specification IEC 62386‑206 (Device Type 5 – Converter) supported
• Selection of the desired device type via operating mode (0x0: Switching Function (default); 0x80: Converter)
• Configurable relay position in case of power loss
• Zero cross switching function
• Firmware update via DALI

LDALI-RM5 / LDALI-RM6 Relay Modules Products

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

• Contact Sales for quote request
• Documentation and Software

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

• Contact Sales for quote request
• Documentation and Software

The post LDALI-RM5 / LDALI-RM6 Relay Modules appeared first on Kepler Electronics.

The LIOB‑562 Modules communicate over Ethernet/IP in the BACnet/IP and BACnet/SC network. They adhere to the BACnet Building Controller Profile (B-BC) and either expose their I/ O data points through BACnet server objects or actively fetch them from a BACnet server via BACnet client maps.

According to the B-BC profile, the LIOB‑562 Modules support BACnet alarming, scheduling, and trending. They are BTL tested and certified.

Communication

The LIOB‑562 I/ O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy-chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB‑562 Modules are equipped with a web interface to query the device status and display or change each data point of the module. In addition to the BACnet object interface, the I/ O data points are exposed by the integrated OPC server providing TLS encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The local display can be accessed via VNC.

LIOB‑IP Mode

The LIOB‑562 Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑562 Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, and L-IOB I/ O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L‑IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

• I/O module with physical inputs and outputs
• Dual Ethernet/IP interface
• BACnet objects for integration in BACnet/IP, BACnet/SC channels
• BACnet Client Mappings to access to BACnet/IP, BACnet/SC objects
• Manual operation using the jog dial or VNC client
• 128×64 graphic display with backlight
• Local access to information about device status and data points in clear text and symbols
• Integrated web server for device configuration and monitoring data points
• Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
• B-BC (BACnet Building Controller) functionality, BTL certified
• Supports BACnet Alarming, Scheduling, and Trending
• Connected to the L‑INX Automation Server, L‑ROC Room Controller, and L-IOB I/O Controller
• Automatic integration into device configurations with L‑INX, L‑ROC, and L-IOB I/O Controller
• Easy device replacement without any additional software
• Built-in OPC XML‑DA and OPC UA server
• Math objects to execute mathematical operations on data points 

LIOB-562 Module BACnet/IP Products

LIOB-562

LIOB-BIP I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

• Contact Sales for quote request
• Documentation and Software

The post LIOB-562 Module BACnet/IP appeared first on Kepler Electronics.

• LIOB-560 Datasheet
• L-IOB I/O Module User Manual
• Installation Instructions
• L-IOB Device Selector
• General I/O Specifications
• Certificates: EC / BTL 
• Downloads

The LIOB‑560 Modules communicate over Ethernet/IP in the BACnet/IP and BACnet/SC network. They adhere to the BACnet Building Controller Profile (B-BC) and either expose their I/O data points through BACnet server objects or actively fetch them from a BACnet server via BACnet client maps.

According to the B-BC profile, the LIOB‑560 Modules support BACnet alarming, scheduling, and trending. They are BTL tested and certified.

Communication

The LIOB‑560 I/ O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB‑560 Modules are equipped with a web interface to query the device status and display or change each data point of the module. In addition to the BACnet object interface, the I/O data points are exposed by the integrated OPC server providing TLS encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The local display can be accessed via VNC.

LIOB‑IP Mode

The LIOB‑560 Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑560 Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, and L-IOB I/ O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L‑IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

• I/O module with physical inputs and outputs
• Dual Ethernet/IP interface
• BACnet objects for integration in BACnet/IP, BACnet/SC channels
• BACnet Client Mappings to access to BACnet/IP, BACnet/SC objects
• Manual operation using the jog dial or VNC client
• 128×64 graphic display with backlight
• Local access to information about device status and data points in clear text and symbols
• Integrated web server for device configuration and monitoring data points
• Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
• B-BC (BACnet Building Controller) functionality, BTL certified
• Supports BACnet Alarming, Scheduling, and Trending
• Connected to the L‑INX Automation Server, L‑ROC Room Controller, and L-IOB I/O Controller
• Automatic integration into device configurations with L‑INX, L‑ROC, and L-IOB I/O Controller
• Easy device replacement without any additional software
• Built-in OPC XML‑DA and OPC UA server
• Math objects to execute mathematical operations on data points

LIOB-560 Module BACnet/IP Products

LIOB-560

LIOB-BIP I/O Modul: 20 Universal I/O (IO)

• Contact Sales for quote request
• Documentation and Software

The post LIOB-560 Module BACnet/IP appeared first on Kepler Electronics.

• LOYREL-816 Datasheet
• LOYREL-816 Installation Sheet
• Certificates: EC
• Downloads

The LOYREL-816 is a relay interface containing eight 16 A relays that are controlled by eight 0/10 V outputs on a L-IOB, LROC-400 or LROC-402.

Features

• Relay Interface for L-IOB, LROC-400 or LROC-402
• Controls up to eight 16 A relays using 0/10 V inputs
• Up to 64 A total current

LOYREL-816 Relay Interface Products

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

• Contact Sales for quote request
• Documentation and Software

The post LOYREL-816 Relay Interface appeared first on Kepler Electronics.