Sensor Archives - Kepler Electronics

KDALI-MW

Maen Sirhan — Sun, 28 Apr 2024 07:27:18 +0000

Ceiling Mount DALI-2 Multi-Sensor KDALI-MW

The ceiling mount multi-sensor is DALI-2 and D4i certified device which combines motion sensor and light sensor. The device performs motion detection and measures illuminance level. The D4i certified multi-sensor can work with D4i LED drivers or luminaires, the luminaires just need to be connected to mains power. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes. The sensor is suitable for high bay applications which need large detection area and sensor based automation. The multi-sensor is D4i certified and can be powered by an AUX 24V power supply in the D4i driver or D4i luminaires, it can also be powered by an external power supply when using with non-D4i DALI drivers.

Key Features

DALI-2 & D4i certified
Microwave motion detection
Motion sensor instance type 3 (303)
Illuminance measurement
Light sensor instance type 4 (304)
Autonomous sensor-based control
Ceiling recessed installation

Specification

Part No.	Cutting Hole	Material/Color	Wire Gauge	Detection Angle
KDALI-MW	70-73mm	ABS/ White	24-18 AWG (0.2-0.75 mm2)	150° (wall), 360° (ceiling)

Product Dimension

Wiring Diagram

The post KDALI-MW appeared first on Kepler Electronics.

KDALI-MW-IP65

Maen Sirhan — Sat, 27 Apr 2024 12:36:10 +0000

IP65 DALI-2 Multi-Sensor with ZHAGA Interface Socket KDALI-MW-IP65

The IP65 multi-sensor is DALI-2 and D4i certified device which combines motion sensor and light sensor. The device performs motion detection and measures illuminance level. The D4i certified multi-sensor can be easily integrated into D4i LED drivers or luminaires seamlessly, and with standard zhaga interface socket,
The sensor can easily fit into various luminaires with no tools required, the sensor-equipped luminaires just need to be connected to mains power.The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes, “he sensor is IP65 rating, which enables it to be used for outdoor luminaires, The multi-sensor is D4i certified and can be powered by an AUX 24V power supply in the D4i driver or D4i luminaires, it can also be powered by an external power supply when using with non-D4i DALI drivers.

Key Features

•DALI-2 & D4i certified
•Microwave motion detection
•Motion sensor instance type 3 (303)
•Illuminance measurement
•Light sensor instance type 4 (304)
•Autonomous sensor-based control
•Seamlessly working with D4i drivers
•Zhaga book 18 socket
•P65 rating, can be used for outdoor luminaires

Physical Information

Dimensions	Sensor head: D50mm’H35mm. Receptacle: D30mm
Mounting	M 20X1.5 thread
Thread length	18.5 mm
Receptacle	D30mm
Gasket Dimensions	D36.5mm
Wires	AWM1015, 20AWG, 6*(120mm)

Electrical Information

Power Supply	12/24/36 VDC (D4i Certified)
Typical DALI Current Draw	2mA
Control	DALI
Marking Terminals	V+. GND (DALI-). DA+
Status Indicators	Red (DALI status). Rod (motion detection)

Sensing

Motion Detection (62386 – 303)	Microwave sensor
Microwave High Frequency	5.8 GHz ±75 MHz ISM band
Detection Sensitivity	0-15 Configurable. 0 is the highest sensitivity
Light Sensor (62386 – 304)	Event: 0-1000 Lux (10bit). resolution: 10lux
Mounting Height	Up to 49ft (15m). recommended height: 13-26ft (4-8m)
Detection Angle	150* (wall). 360* (ceiling)
Function	Configurable

Environment

Operating Temperature Range	-40 F ~ 104 F / -40 C ~ 70 C
Operating Humidity	0-95% (non condensing)
Safety Certification	cULus Listed. CE

Wiring Diagram

The post KDALI-MW-IP65 appeared first on Kepler Electronics.

Presence sensor KE-OCC-24D

Maen Sirhan — Mon, 22 Apr 2024 11:50:56 +0000

Presence sensor (switching function) – Drycontact version

Product features

Live detection algorithm for mixed motion, micro-motion and breath detection for true presence sensing.
Low impedance, high gain anti-antenna design, resistant to 5G, WiFi, Bluetooth and other wireless signal interference.
Remote control design, user can configure each sensing parameter according to requirements.
Supports inline standalone installation.
3 years warranty (free replacement within 1 year for non-human damage).

Specification

Input	Operating Voltage	12 – 24V DC Operate
Input	Operating Vurrent	45mA MAX@12V
Output	Working Mode	Dry contact (normally open/normally closed)
Output	Rated Load	15W (Inductive) 25W (Resistive)
Induction parameters	Operating Frequency	5.8 GHz
	Transmitting Power	0.5mW Max.
	Hold Time	58 – 30Min
	Detection	100% (10M) I 75% (7M) I 50% (5M) I 25% (3M)
	Daylight	51ux – 1501ux I Disable (Diffuse reflection)
	Detection Range (Radius)	1 – 10m Motion sensing distance
		1 – 5m Micro-motion detection distance
		1 – 4m Breath detection distance
	Recommended Mounting Height	2.5 – 4m, Recommend 3m
	Detection Angle	120°
Environment	Working Environment Temperature I Humidity	-25°C ~ +50°C
Environment	Storage Temperature I Humidity	-40°C ~ +80°C
Accreditation Standards	Safety (LVD) Standards	EN61058-1 , EN61058-1-2
	Electromagnetic Compatibility (EMC) Standards	EN300440 ; EN301489-1 ; EN55015; EN61547;EN62479
	Environmental Requirements	Compliant with EU RoHS requirements
	Compliant With Certification	CE RED

*All technical information is subject to actual performance, product models and parameters are subject to change without notice and the company reserves the right of final interpretation.

	lnpuUoutput (Terminal/lead)	Slingshot type lifting terminal block 0.75mm2-1.5mm2
	Protection Class	Overall protection class: IP20, built-in exposed parts: IP44
	Product Categories	Class II appliances
	Installation Requirements	Built-in freestanding installation
	Hole Size	065 – 075
	Packaging Requirements	White box + flat card + outer box
	Net Weight	150g
	Longevity	3-year warranty (free replacement within 1 year for non-human damage)

Note: 1. fill in “N/A” if there are no specifications. 2. state the test conditions

Dimension

Wiring Diagram

Functional Diagram

The post Presence sensor KE-OCC-24D appeared first on Kepler Electronics.

LOYUNO-L UNOlite Indoor Air Quality Sensor

Maen Sirhan — Tue, 02 Apr 2024 16:02:55 +0000

LOYUNO-L represents the pinnacle of indoor air quality monitoring, purposefully designed for effortless integration with BAS/BMS systems. This advanced instrument detects and analyses a wide range of indoor air quality factors, including Ultra-fine, Fine, and Standard Suspended Particulates (PM1, PM2.5, and PM10), Carbon Dioxide (CO₂), Total Volatile Organic Compounds (TVOC), while also monitoring Temperature and Humidity levels.

LOYUNO-L ensures accurate data, serving as a vital component in achieving LEED green or WELL certification for your building. Rigorously tested and certified for its precise sensing capabilities in detecting PM2.5, CO₂, and TVOC, LOYUNO-L meets the stringent standards set by WELL v2.

LOYUNO-L comes equipped with LOYTEC Bluetooth Mesh capabilities, seamlessly integrating with the other Bluetooth Mesh enabled devices. This versatile compatibility makes LOYUNO-L equally well-suited for both new construction projects and retrofitting BAS/BMS systems.

Features

Multiple IAQ monitors (PM1, PM2.5, PM10, CO₂, TVOC, Temperature, Humidity)
Supports BACnet MS/TP and Modbus RTU
Meets Q1 2022, v2 WELL A08 Requirements
Bluetooth Mesh based sensor
LEDs for optical air quality feedback and status indication
Easy integration on Bluetooth Mesh enabled LOYTEC devices (e.g. LPAD-7)
RESET Grade B Accredited Monitor

LOYUNO-L UNOlite Indoor Air Quality Sensor Products

LOYUNO-L

UNOlite Indoor Air Quality Sensor

The post LOYUNO-L UNOlite Indoor Air Quality Sensor appeared first on Kepler Electronics.

LDALI-MS Multi-Sensor

Maen Sirhan — Tue, 02 Apr 2024 15:41:57 +0000

LDALI-MS2-BT / LDALI-MS3-BT / LDALI-MS4-BT Multi-Sensor

LDALI-MS3-BT

LDALI-MS4-BT

The LOYTEC LDALI-MS2-BT/MS3-BT/MS4-BT multi‑sensor performs occupancy detection and measures the illuminance level. It integrates perfectly into the L‑DALI product line of lighting controllers and LROC‑40x room automation controllers. The occupancy sensor uses a passive infrared presence detector and a digital microphone. The sensor is optimized for use in typical office environments where even the small movements of somebody working at a desk and hitting the keyboard have to be detected across the complete detection area.

The LDALI-MS2-BT/MS3-BT provides a presence detection zone diameter of 10.8 m at 3 m mounting height and is ideal to cover a typical office room or an area in an open office space. As well it is suitable for highbay‑applications for mounting heights up to 12 m. The detection area for mounting heights from 5 m to 12 m is 256 m2.

The LDALI-MS4-BT provides a flat lense and the presence detection zone diameter is 7 m at 3 m mounting height.

With the built‑in infrared receiver, the room’s lights, sunblinds and HVAC system can be controlled via the optionally available IR remote control L-RC1. In addition to occupancy and illuminance sensors, the LDALI-MS2-BT/MS3-BT/MS4-BT comes with integrated temperature and humidity sensors. In room automation applications, those values can used to calculate the current dew point. On the back of the sensor, there is a connector for three digital inputs, allowing to connect conventional switches and push‑buttons, window contacts, dew point sensor, etc. This feature not only saves on additional hardware, but also significantly reduces wiring costs, as the inputs can be wired inside the room and wires no longer have to be pulled to the I/O modules in the switching cabinet.

Furthermore, the LDALI-MS2-BT/MS3-BT/MS4-BT can transmit all supported beacon types (iBeacon, Eddystone UID beacon or manufacturer specific LOYTEC beacon) for indoor localization.

The LDALI-MS2-BT comes with three mounting options: It can be mounted in‑wall in standard flush‑mounted boxes, spring snap in false ceilings and on‑wall with the included surface mounting box. The LDALI-MS3-BT/MS4-BT is designed to be used with spring snaps in false ceilings.

Communication and power supply is handled via the DALI bus. The LDALI-MS2-BT/MS3-BT/MS4-BT is a DALI-2 certified multi‑sensor as defined in the IEC 62386 (2014) standard and can integrated into DALI‑2 systems of other vendors.

Features

Easy integration into LOYTEC L‑DALI lighting systems and LROC‑40x room automation controllers with a special focus on lighting control and reducing energy costs
DALI-2 certified input device, according to IEC 62386-101, IEC 62386-103, IEC 62386-301, IEC 62386-303 and IEC 62386-304
High sensitivity occupancy detection – dual technology (PIR and acoustic, separate sensitivity parameter for each technology, sensitivity adjustable), optimized for office applications
Lux level measurements
Built-in infrared receiver for optional infrared remote control L-RC1
Temperature sensor
Humidity sensor
3 digital inputs (dry contact)
Configurable Bluetooth beacons and services: indoor navigation, asset tracking and access to LWEB-900 room control solution
The LDALI-MS3/MS4-BT can mounted directly in false ceilings (spring mount included).
The LDALI‑MS2-BT can mounted in a flush-mounted box, directly in false ceilings (spring mount included) or on-wall (mounting kit LOYMS2-OW must ordered separately).
Multi-master compatible, up to 16 LDALI-MS2-BT/MS3-BT/MS4-BT sensors per DALI channel given a sufficiently dimensioned bus supply
Supplied via the DALI bus, no external power supply required
Sensor head of the LDALI-MS2-BT/MS3-BT can tilted up to ±15° vertically
Flat lense in LDALI-MS4-BT type
Firmware update via DALI

LDALI-MS2-BT / LDALI-MS3-BT / LDALI-MS4-BT Multi-Sensors Products

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS3-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LOYMS2-OW

LOYMS2-OW, On-wall Surface Mounting Box Kit for LDALI-MS2-BT / LOYBT-MS2 (8 boxes per package), expected availability Q2 2024

L-RC1

Infrared remote control for room automation applications

The post LDALI-MS Multi-Sensor appeared first on Kepler Electronics.

LOYBT-TEMP1 Temperature Sensor

Maen Sirhan — Tue, 02 Apr 2024 13:49:45 +0000

LOYBT-TEMP1 Temperature Sensor – Size Comparison

The LOYBT-TEMP1 Bluetooth sensor is a battery powered sensor for measure‑ ments of room temperature and relative humidity. It acts as a low‑power node in a Bluetooth Mesh network and publishes sensor data on change of value as well as periodically.

The device allows to perform measurements at the location of your choice and after adding the sensor to the LPAD-7 the sensor data is automatically mapped to the system registers room temperature and humidity.

Device wake up can be forced by press of the service button. Dependent on the device status the device tries to join a Bluetooth Mesh network, find a friend which allows the device to operate as low power node or simply transmits sensor data.

A service button press is always acknowledged by status LED blinking, the LED is also used to indicate power-up and firmware update procedure.

Features

Easy integration with Bluetooth Mesh enabled LOYTEC devices (e.g. LPAD-7)
Bluetooth Mesh based sensor, supports low power node feature
Temperature sensor
Humidity sensor
Battery powered, expected battery lifetime: 2 years
Battery level reporting
Supports firmware update
Service Push Button for manual interaction
LED for optical feedback

LOYBT-TEMP1 Temperature Sensor Products

LOYBT-TEMP1

Bluetooth Mesh temperature sensor (5 pieces per package)

The post LOYBT-TEMP1 Temperature Sensor appeared first on Kepler Electronics.