Routers Archives - Kepler Electronics

NIC

Maen Sirhan — Fri, 29 Mar 2024 08:25:01 +0000

NIC Datasheet
NIC User Manual
Installation Instructions: NIC709-IPxE100C / NIC709-USB100
Certificates: EC
Downloads

LOYTEC NICs are the most universal network interfaces for CEA‑709 and IP-852 (Ethernet/‌IP) channels. Based on LOYTEC’s Core Technologies, they offer high packet rates and short response times. All NICs are fully compatible with products like NL220, ALEX, LonMaker®, and other LNS® applications. The NICs are also compatible with NodeUtil32, NLUtil, OPC servers, and high performance ORION applications.

The multiplexed network interface (MNI) support allows starting multiple LNS® or MIP applications to run in parallel with an LPA on a single network interface.

The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Features

Network interface for TP/FT‑10, TP/XF‑1250, RS485, and Ethernet/IP (IP‑852) channels
Available for USB and Ethernet port
Create up to eight network nodes with a single network interface (MNI devices)
Use the LPA, LSD Tool, your ORION applications, MIP applications, and LNS® (VNI) applications on a single network interface at the same time
Compatible with BMS e.g. Honeywell EBI, TAC VISTA, etc.
Compatible with LNS® applications in high performance VNI mode e.g. NL220, NLFacilities, NLOPC-VNI, ALEX, LonMaker®, etc.
Compatible with MIP applications (LDV interface) e.g. NodeUtil32, NLUtil, NLOPC-MIP, Honeywell CARE 5/7, etc.
Compatible with high performance ORION applications (ORION API)
NIC852 is fully compatible with L-IP and i.LON® 600 Internet routers
Use legacy MIP applications together with the IP‑852 (Ethernet) channel
With dual Ethernet, switched or separated (only NIC709‑IP3E100C, NIC709‑IP1E100C)
Supports WLAN with LWLAN‑800 Interface (only NIC709‑IP3E100C, NIC709‑IP1E100C)
Supports LTE with LTE‑800 Interface (only NIC709‑IP3E100C, NIC709‑IP1E100C)
Runs on Windows 10, Windows Server 2012, Windows Server 2016, Windows Server 2019

NIC Products

NIC709-USB100

USB-Interface, connects to the USB port of a PC, supports LonMark TP/FT-10, TP/XF-1250, and TP/RS-485

NIC709-IP1E100C

Remote network interface (RNI), PC connection via Ethernet/IP, Supports a LonMark TP/XF-1250 channel

NIC709-IP3E100C

Successor of NIC709-IP3E100, Remote network interface (RNI), PC connection via Ethernet/IP, Supports a LonMark TP/FT-10 channel

NIC852

Floating licence via USB hardlock key, uses Ethernet port of PC to connect to a LonMark IP-852 channel

NIC852-SW

Software license, Software activation with costs for one PC, uses Ethernet port of PC to connect to a LonMark IP-852 channel

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LT-03

Network terminator for 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x Network Access Connector RJ45

LT-13

Network terminator for: 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x TP/XF-1250 (bus toplogy only)

LT-33

Network terminator for 2 x TP/FT-10 or TP/LPT-10 (bus or free topology)

The post NIC appeared first on Kepler Electronics.

L-IP Router BACnet

Maen Sirhan — Fri, 29 Mar 2024 08:23:39 +0000

The LIP-ME201C, LIP-ME202C, and LIP-ME204C BACnet/‌IP Routers connect BACnet MS/‌TP channels to a BACnet/‌IP network. The BACnet routers are compliant with the standards ASHRAE 135‑2012 and ISO 16484‑5:2012. The routers can be configured to act as a BACnet Broadcast Management Device (BBMD). The L-IP BACnet/‌IP Routers also provide Foreign Device support and BACnet/SC.

The BACnet router can act as a BACnet Time Master and as a BACnet MS/‌TP Slave Proxy. Extended features like the optional write protection of the BDT, a BACnet/‌IP Access Control List (ACL), and a simple communications test for BBMD help to locate issues on the network. The BACnet router also features remote MS/‌TP data packet capturing. BACnet MS/‌TP data packets are captured by the device and can be analyzed using Wireshark (free Protocol Analyzer, www.wireshark.org). Wireshark can either connect to the L-IP online or the capture file is loaded from the L-IPs web server and analyzed offline in Wireshark.

The entire device configuration of the BACnet router is done via the built-in web server, optionally also secured via HTTPS protocol. The BACnet router is BTL tested and WSPcert certified as BACnet Application Specific Controller (B-ASC).

Each L-IP BACnet/‌IP Router is equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) and BACnet/SC while the second port can be configured to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/‌IP are present. These devices also feature firewall functionality of course to isolate particular protocols or services between the ports. The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Features

Routes packets between BACnet MS/‌TP and BACnet/‌IP, BACnet/SC
Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
BBMD (BACnet Broadcast Management Device)
Foreign device support
Slave Proxy for up to 32 MS/‌TP slave devices
Configuration via built-in web server
Built-in OPC XML‑DA and OPC UA server
Dual switched or separated Ethernet ports
Access to network statistics via web browser
BACnet MS/‌TP diagnostic LED
BACnet MS/‌TP diagnostic via web interface
MS/‌TP remote data packet capture (Wireshark)
Ethernet link and activity LED
Secure web interface via HTTPS
128×64 graphic display with backlight
Local display of device information
Manual operation using the jog dial or VNC client
Supports WLAN through LWLAN‑800 Interface
Supports LTE through LTE‑800 Interface
Stores user-defined project documentation
Supports VPN for BACnet/IP

L-IP Router BACnet Products

LIP-ME201C

Successor of LIP-ME201, BACnet/IP Router, 1 x BACnet MS/TP (RS-485), 2 x Ethernet Port (BACnet/IP)

LIP-ME202C

BACnet/IP Router, 2 x BACnet MS/TP (RS-485), 2 x Ethernet Port (BACnet/IP)

LIP-ME204C

BACnet/IP Router, 4 x BACnet MS/TP (RS-485), 2 x Ethernet Port (BACnet/IP)

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LT-04

Network terminator for 1 x RS‑485 (bus topology, ANSI TIA/EIA-485), 1 x Network Access Connector RJ45

LT-B4

Network terminator, 1 x RS‑485 (bus topology, ANSI TIA/EIA-485) with biasing circuit (failsafe biasing)

The post L-IP Router BACnet appeared first on Kepler Electronics.

L-IP Router CEA-709

Maen Sirhan — Fri, 29 Mar 2024 08:22:07 +0000

LIP-xECTC Datasheet
Installation Instructions: LIP-3333ECTC, LIP-1ECTC / LIP-3ECTC / LIP-33ECTC
L-IP User Manual
Certificates: EC / UL
Downloads LIP-3333ECTC, LIP-1ECTC, LIP-3ECTC, LIP-33ECTC

The L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC connect twisted pair channels (TP/‌FT‑10 or TP/‌XF‑1250) with the Ethernet/‌IP channel (IP‑852) in LonMark Systems. L-IP routes CEA‑709 packets through an IP based network such as a LAN (Ethernet), an Intranet, or even the Internet. In order to provide optimal router configurations, the L-IP is available in four different versions providing either 4 x TP/FT‑10, 2 x TP/FT‑10, 1 x TP/FT10, or 1 x TP/XF‑1250. Every L-IP supports the operating modes “Smart Switch Mode” and “Configured Router Mode”.

For an easy integration on the IP side, the L-IP provides a Web interface. On L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC the Web interface can also be used via an encrypted HTTPS connection. Through this Web interface, the built-in CEA-852 Configuration Server can be switched on and configured. The Configuraton server is thus always available online in the network and no additional software tool is required.

Besides the router functionality, the L-IP Routers provide outstanding capabilities for network diagnostic and analysis. They allow the LPA (LOYTEC Protocol Analyzer) transparent access to the twisted pair channels (TP/‌FT-10 or TP/XF-1250) on the device via Ethernet/‌IP – via a local Intranet or the Internet. This allows a fast analysis of data communication and reduces time-consuming troubleshooting. All system registers are available as OPC XML‑DA and OPC UA data points.

The L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC are equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (building LAN) where the standard building automation protocols are present (e.g. IP-852). These devices also feature firewall functionality, of course to isolate particular protocols or services between the ports. The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Features

Routes CEA‑709 packets between TP/‌FT‑10 (link power compatible) or TP/‌XF‑1250 channels and Ethernet/‌IP (IP‑852)
Compliant with CEA-709, CEA-852, and ISO/‌IEC 14908-1 standard (LonMark System)
Supports Configured Router mode, Smart Switch mode, and Repeater mode
Built-in CEA-852 configuration server for up to 100 members
Support for operation behind NAT routers and firewalls
Easy installation, Auto-NAT, roaming, DHCP
Remote LPA support with LPA-IP
Integrated web server for device and IP-852 configuration
Built-in enhanced communication test for IP-852
Network diagnostic LEDs
Dual switched or separated Ethernet ports
Secure Web interface via HTTPS
Built-in OPC XML‑DA and OPC UA server
128×64 graphic display with backlight
Local display of device information
Manual operation using the jog dial or VNC client
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE‑800 Interface
Stores user-defined project documentation
Supports VPN for IP-852

L-IP Router CEA-709 Products

LIP-1ECTC

CEA-709/IP-852 Router, 1 x TP/XF-1250, 2 x Ethernet Port (IP-852)

LIP-3ECTC

Successor of LIP-3ECTB, CEA-709/IP-852 Router, 1 x TP/FT-10, 2 x Ethernet Port (IP-852)

LIP-33ECTC

Successor of LIP-33ECTB, CEA-709/IP-852 Router, 2 x TP/FT-10, 2 x Ethernet Port (IP-852)

LIP-3333ECTC

Successor of LIP-3333ECTB, CEA-709/IP-852 Router, 4 x TP/FT-10, 2 x Ethernet Port (IP-852)

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LT-03

Network terminator for 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x Network Access Connector RJ45

LT-13

Network terminator for: 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x TP/XF-1250 (bus toplogy only)

LT-33

Network terminator for 2 x TP/FT-10 or TP/LPT-10 (bus or free topology)

The post L-IP Router CEA-709 appeared first on Kepler Electronics.