LonMark Archives - Kepler Electronics

LIOB-FT I/O Modules LonMark

Maen Sirhan — Tue, 02 Apr 2024 16:36:48 +0000

The LIOB-15x Modules are LonMark certified and communicate over TP/FT-10 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LIOB-FT Mode

The LIOB-15x Modules can be switched to LIOB-FT mode using manual local operation. In LIOB-FT mode, the LIOB-15x Modules extend L-INX Automation Servers and L-ROC Room Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L-IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

I/O module with physical inputs and outputs
SNVT-based interface for integration on the LonMark TP/FT-10 channel
LonMark certified
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Compliant with CEA‑709 and ISO/IEC 14908-2 standard (LonMark System)
Connected to the L-INX Automation Server or L-ROC Room Controller via LIOB‑FT
Automatic integration into device configurations with L-INX and L-ROC
Easy device replacement without any additional software
LNS plug‑in for the device configuration in the LonMark System

LIOB-FT I/O Modules LonMark Products

LIOB-150

LIOB-FT I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-151

LIOB-FT I/O Module: 8 UI, 12 DI

LIOB-152

LIOB-FT I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-153

LIOB-FT I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-154

LIOB-FT I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-FT I/O Modules LonMark appeared first on Kepler Electronics.

L-VIS Touch Panels for LonMark, BACnet, and Modbus networks

Maen Sirhan — Tue, 02 Apr 2024 14:42:02 +0000

L-VIS Touch Panels for LonMark, BACnet, and Modbus networks are ideally suited for visualization and operation of various applications in building automation. L-VIS Touch Panels visualize building systems, can be used as room operator panels, in hospital operation or isolation rooms, conference and reception areas. The fully customizable user screens can show dynamic pages that are easy to navigate. L-VIS Touch Panels make use of an extremely low power embedded controller platform and operating system. This makes L-VIS resistant against problems when re-booting after power outage and also against any viruses.

L-VIS impresses with its timeless design, harmonic integration into modern and historical architecture, and with its extremely user friendly concept. The shallow installation depth and low thermal power loss allow mounting in almost any location.

Different Sizes

L-VIS Touch Panels are available in the following variations:

LVIS-3ME7-Gx

Touch Display, 800 x 480, 262 144 colors
Frameless glass front and capacitive touch

LVIS-3ME12-Ax

12,1“ Touch Display, 800 x 600, 262 144 colors
Aluminum frame with anodized finish

LVIS-3ME15-Ax

15“ Touch Display, 1024 x 768, 262 144 colors
Aluminum frame with anodized finish

LVIS-3ME15-Gx

15“ Touch Display, 1024 x 768, 262 144 colors
Frameless glass front and capacitive touch

Dynamic Graphical Pages

The graphical pages may consist of multiple dynamic graphical controls that show the current plant status in real time. It is also possible to access decentralized schedules, alarm servers, or trends. The graphical projects are designed with the L-VIS/‌L-WEB configuration tool free of charge. Without any know-how in HTML or Java, user specific graphical pages can be created. Dynamic information is shown through value or text controls, changing symbols, bar charts, trend views, alarm and event lists, or schedule controls. The L-VIS/‌L-WEB configuration tool allows for using most of the pixel graphic formats (GIF, JPG, BMP, TIFF, PNG, MNG, ICO), vector graphics (SVG) and alpha blending.

Playback of Audio Files and Streams

The L-VIS Touch Panel supports the playback of stereo MP3, WAV, and MP3 streams (for example webradio). The playback will be started or stopped by the respective action object. The action object is linked to one of the available audio files or to the URL of an MP3 stream. When accessing a playback via LWEB‑802 or LWEB‑803, it will be executed locally on the client.

Automatic Page Generation

Pages including data point names and values, alarm views, schedules or trends can be created automatically by the L-VIS/L-WEB configuration tool. This significantly reduces engineering time and cost.

Connectivity and Data Points

The L-VIS Touch Panels support connectivity to LonMark Systems and BACnet networks. In addition, the Touch Panels provide communication to Modbus either as Master or Slave. For this purpose, Modbus TCP is supported exclusively and Modbus RTU is available via the RS‑485 terminal.

L-VIS Touch Panels communicate with LonMark Systems via IP-852 (Ethernet/‌IP) or TP/‌FT‑10 channels. The integrated remote network interface (Ethernet/‌IP) provides remote access to the TP/‌FT‑10 channel for configuration, service and maintenance purposes.

In addition, the L‑VIS Touch Panels provide connectivity to Modbus TCP via Ethernet/‌IP.

BACnet networks are connected via BACnet/‌IP, BACnet/‌SC or BACnet MS/‌TP. The L-VIS Touch Panels implement the BACnet Building Controller (B-BC) profile. They include a fully featured built-in BACnet/‌IP, BACnet/‌SC to MS/‌TP router with BBMD (BACnet Broadcast Management Device) and slave proxy functionality.

Math objects can calculate any kind of formula using data points available on the device. The resulting data point value can then be either shown on the page or provided via an output Network Variable. Network Variables are automatically mapped to OPC data points that can be accessed via Web services.

The L-VIS devices provide fully featured AST functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L-WEB Building Management System.

The L-VIS devices are equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configure to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/‌IP, LON/‌IP, or Modbus TCP are present. These devices also feature firewall functionality of course to isolate particular protocols or services between the ports.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The L‑VIS devices provide fully featured AST functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L‑WEB Building Management System.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Features

High resolution TFT touch display with dimmable backlight
Anodized aluminium front frame or frameless glass front and capacitive touch (LVIS-3ME7‑Gx/LVIS-3ME15-Gx)
Flush-mounting in combination with the mounting frame
Stores customized graphical pages
Visualization of customized graphical pages through built-in touch panel, LWEB‑900 (building management), and LWEB‑802/‌803
Device configuration and graphical page creation with the L-VIS/L-WEB configuration tool free of charge
Supports all popular graphic file formats such as GIF, JPEG, BMP, TIFF, PNG, MNG, ICO
Support of SVG vector graphics
Supports alpha blending
Supports popular font types such as TrueType, Type-1, BDF, PCF, and OTF
Supports Unicode text and complex writing systems
Built-in OPC UA and OPC XML-DA server
Built-in OPC XML-DA client
Dual Ethernet/IP Interface
Alarming, Scheduling, and Trending (AST)
Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
Event-driven e-mail notification
Math objects to execute mathematical operations on data points
Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
Supports CEA-709 TP/‌FT‑10 or IP-852 (Ethernet/‌IP)
Support of dynamically created network variables or static network variables
Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
Remote Network Interface (RNI) with 2 MNI devices
Compliant with ANSI/ASHRAE–135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP, BACnet/‌SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
BACnet Client Configuration with configuration tool (scan and EDE import)
B-BC (BACnet Building Controller)
Integrated BACnet/‌IP, BACnet/‌SC to BACnet MS/‌TP Router
BBMD (BACnet Broadcast Management Device)
Modbus TCP and Modbus RTU (Master or Slave)
Integrated web server for device configuration and monitoring data points
Access to network statistics
Configurable via Ethernet/‌IP or TP/FT‑10
Playback of audio files and streams
Supports WLAN through LWLAN-800 Interface
Supports LTE through LTE-800 Interface

Tutorials

Features of L-VIS Firmware Release 7.2

How to create schedulers (CEA-709) [A001]

This tutorial describes how to create schedulers on an L-VIS Touch Panel with the configuration tool L-VIS Configurator.

How to create a calendar including exception days (CEA-709) [A002]

This tutorial describes how to create a calendar including exception days on an L-VIS Touch Panel with the configuration tool L-VIS Configurator.

How to operate a scheduler on the web interface of a L-INX Automation Server [A004]

This tutorial describes how to use the Web UI of the L-INX Automation Server.

How to create a remote scheduler (CEA-709) [A005]

This tutorial describes how to configure the L-INX Automation Server with the configuration tool NL220 LonWorks© Manager

How to create alarms (CEA-709) [A006]

This tutorial describes how to create alarms on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to use e-mail configuration [A007]

This tutorial describes how to configure the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create trend objects [A008]

This tutorial describes how to create trend objects on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create static network variables [B001]

This tutorial describes how to create static network variables on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create dynamic network variables [B002]

This tutorial describes how to create dynamic network variables on the L-INX Automation Server with the configuration tool NL220 LonWorks© Manager.

How to create network variables by using LNS scan [B003]

This tutorial describes how to create network variables by using LNX scan on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create network variables by using network scan [B004]

This tutorial describes how to create network variables by using network scan on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to import network variables by using CSV file import [B005]

This tutorial describes how to import network variables by using CSV file import on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to import extern network variables (LNS scan or network scan) [B006]

This tutorial describes how to import extern network variables on the L-INX Automation Server with the configuration tool L-INX Configurator.

How to create network variables by using Filter Templates [B007]

This tutorial describes how to create network variables by using Filter Templates on the L-INX Automation Server with the configuration tool L-INX Configurator.

L-VIS/L-WEB Configurator – How to use text controls [V001]

L-VIS/L-WEB Configurator – How to use number controls [V002]

L-VIS/L-WEB Configurator – How to use schedulers [V003]

L-VIS/L-WEB Configurator – How to use bar controls [V004]

L-VIS/L-WEB Configurator – How to create simple menu structure [V005]

L-VIS/L-WEB Configurator – How to use costum fonts [V006]

L-VIS/L-WEB Configurator – How to create math objects [V007]

L-VIS/L-WEB Configurator – How to create different actions [V008]

L-VIS/L-WEB Configurator – How to create alarm lists [V009]

L-VIS/L-WEB Configurator – How to create data logs [V010]

L-VIS/L-WEB Configurator – How to create templates [V011]

L-VIS/L-WEB Configurator – How to create templates including datapoints [V012]

L-VIS Tutorial: Reset to Factory Defaults – LVIS-3MEx [V013]

L-VIS Tutorial: Reset to Factory Defaults – LVIS-3Ex, LVIS-MEx [V014]

A quick start scenario creating an L-WEB database [W002]

This tutorial describes how to create a database with the LWEB Server and the configuration tool L-INX Configurator on the example of configuring the L-INX Automation Server.

L-VIS Touch Panels for LonMark, BACnet, and Modbus networks Products

LVIS-3ME7-G1

CEA-709, BACnet, and Modbus Touch Panel 7″, frameless glass front and capacitive touch, silver

LVIS-3ME7-G2

CEA-709, BACnet, and Modbus Touch Panel 7″, frameless glass front and capacitive touch, black

LVIS-3ME12-A1

CEA‑709, BACnet, and Modbus Touch Panel 12.1″, aluminum frame with anodized finish

LVIS-3ME15-A1

CEA‑709, BACnet, and Modbus Touch Panel 15″, aluminum frame with anodized finish

LVIS-3ME15-G1

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, silver

LVIS-3ME15-G2

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, black

LVIS-3ME15-G3

CEA-709, BACnet, and Modbus Touch Panel with 15″ display, frameless glass front and capacitive touch, white

LVIS-FRAME7

Mounting frame for 7″ Touch Panels

LVIS-FRAME12

Mounting frame for 12.1″ Touch Panels

LVIS-FRAME15

Mounting frame for 15″ Touch Panels

LVIS-MNTKIT-U

L-VIS Mounting Kit Universal (LVIS-FRAMEx not included)

LVIS-ONWALL7

Wall mount frame side cover for LVIS-3ME7 (2 pieces), needs LVIS-FRAME7

LVIS-ONWALL12

Wall mount frame side cover for LVIS-3ME12 (2 pieces), needs LVIS-FRAME12

LVIS-ONWALL15

Wall mount frame side cover for LVIS-3ME15 (2 pieces), needs LVIS-FRAME15

LVIS-STAND7

Demo Stand for LVIS-3ME7-Gx Touch Panels

LVIS-STAND12

Demo Stand for LVIS-3ME12-Gx Touch Panels

LVIS-STAND15

Demo Stand for LVIS-3ME15-Gx Touch Panels

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE Interface

The post L-VIS Touch Panels for LonMark, BACnet, and Modbus networks appeared first on Kepler Electronics.

LIOB-IP852 I/O Modules LonMark

Maen Sirhan — Tue, 02 Apr 2024 13:28:11 +0000

The LIOB-45x Modules are LonMark certified and communicate over Ethernet/IP-852 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LonMark IP-852 Channel over Ethernet

The LIOB-45x I/O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB-45x Modules are equipped with a Web interface to query the device status. The local display can be accessed via VNC.

LIOB-IP Mode

The LIOB‑45x Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑45x Modules extend L‑INX Automation Servers, L‑ROC Room Controllers and L-IOB I/O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

Features

I/O module with physical inputs and outputs
Ethernet/IP network interface
SNVT-based interface for integration on the LonMark IP-852 channel
LonMark certified
Up to 512 address table entries (ECS mode)
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Connected to the L‑INX Automation Server, L‑ROC Room Controller and L-IOB I/O Controller via LIOB‑IP
Automatic integration into device configurations with L‑INX, L‑ROC and L-IOB I/O Controller,
Easy device replacement without any additional software
Integrated Web server for the device configuration
LNS plug‑in for the device configuration in the LonMark System

LIOB-IP852 I/O Modules LonMark Products

LIOB-450

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-453

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-IP852 I/O Modules LonMark appeared first on Kepler Electronics.

LPA Protocol Analyzer

Maen Sirhan — Fri, 29 Mar 2024 08:26:43 +0000

The LOYTEC Protocol Analyzer (LPA) for LonMark Systems captures all data packets on CEA‑709 or IP-852 networks and displays all recorded packets on a PC screen. The LPA software provides a comprehensive set of functions and methods to view, filter, and analyze data packets down to bit level.

The long time recording capability helps to find even intermittent faults on the network. When the system is configured by an LNS based tool, the LPA software can browse the database in order to display the node and network variable names. Together with all LOYTEC devices featuring a Remote Network Interface (RNI), the LPA software can record packets even from remote twisted-pair channels.

With a single mouse-click, the built-in report function creates reports (text files) showing the health condition of the investigated channel and gives hints and tips on how to solve problems on this channel.

The intuitive and easy-to-use LPA software runs on all LOYTEC network interfaces. On the NIC852 network interfaces, it supports the remote LPA functionality. Each LPA-SW license must be registered for one LOYTEC NIC.

Features

Online CEA‑709.1 packet monitoring in LonMark Systems
Packet interpretation down to bit-level
High resolution packet time-stamping
Advanced, context specific packet filter and converter manipulation
Conversion of network addresses and variables into symbolic names
dvanced Transaction Identification
Integrated Node Statistics for all detected domains, subnets, nodes, and groups
Extensive packet statistics (short packets, CRC errors, packets/‌s, etc.)
Statistic report function including hints and tips for solving network problems
Statistic report plug-in interface for localization or customization of the statistic report
Trend Logging for bandwidth utilization and packet errors
LNS® database interpretation
Interpretation of SNVTs, network management, and diagnostic messages
Displays SNVTs in ISO and Imperial US system
Long-term packet recording capability and error tracking in packets with protocol errors
Remote LPA function (needs LPA‑IP, LPA-SET-USB or LPA‑IP-SW plus NIC852) with L-IP, NIC709-IP, LVIS‑3E100, LVIS‑3ME7‑Gx, LVIS‑3ME12‑Ax, LVIS‑3ME15‑Ax, LVIS‑3ME15‑Gx, LINX‑10x, LINX‑11x, LINX‑12x, LINX‑15x, LROC‑10x, LGATE‑902, LGATE‑95x

LPA Products

LPA-SET-USB

Set contains: Network Interface NIC709-USB100 and NIC852, Protocol Analyzer Software LPA-IP-SW for IP-852 channels, supports remote LPA, registered to NIC852, and Protocol Analyzer Software LPA-SW for CEA‑709 channels, registered to NIC709-USB100

LPA-USB

Set contains: Network Interface NIC709-USB100, and Protocol Analyzer Software LPA-SW for CEA‑709 channels, registered to NIC709-USB100

LPA-IP

IP-852 Channel Protocol Analyzer Bundle contains: Network Interface NIC852, Protocol Analyzer Software LPA-IP-SW for IP-852 channels, supports remote LPA, registered to NIC852

LPA-SW

Protocol Analyzer Software, supports all NIC709 network interfaces, NIC709 not included

LPA-IP-SW

Protocol Analyzer Software for IP-852 channels, supports Remote LPA functionality, NIC852 not included

The post LPA Protocol Analyzer appeared first on Kepler Electronics.