KNX to 2 Channel DALI Gateway KDALI-KNX-2CH

The KNX DALI Gateway is a DIN rail module for installation in the distribution board on a 55 mm mounting raiL It is a DALI single-master controller to DALI standard IEC 62386 Parts 101ed2 and lOSedl.The gateway is suitable for use with DALI and DALI-2 systems.lt supports Device Type 6. Device Type 8 Tc, Device Type 8 XY coordinate. Device Type 8 RGB with DALI interfaces to IEC 62386 and their integration in a KNX building installation.The DALI gateway has 2 channels DALI output Up to 64 DALI devices can be connected to each DALI output DT6 and DT8 devices can all be connected to each DALI output in a mixed configuration.The lamps connected to each DALI channels are controlled via KNX usinghroadcast64 individual lamps;16 lighting groups;16 scenes

Key Features

• Integrated DALI into KNX system
• 2 channels DALI output
• Each DALI channel with 25CmA DALI PS output
• No ext’a DALI PS required. simpLe wiring
• Supports all DALI DT6 & DTS device types
• Mini USB port to connect to DALI PC software
• Programmable through ETS software
• DALI bus state monitor indicator

Specification

Product Dimension

Wiring Diagram

The post KDALI-KNX-2CH appeared first on Kepler Electronics.

• LKNX-300 Datasheet
• LOYTEC Device User Manual
• LKNX-300 Installation Sheet
• Certificates: EC
• Downloads

The KNX-Interface LKNX‑300 allows the L‑INX Automation Servers, the L‑ROC Room Controllers, and the L‑GATE Universal Gateways to interface to KNX devices connected to a KNX TP1 Bus. The LKNX‑300 Interface needs to be connected to the EXT-Port on the L‑INX/L‑ROC/L‑GATE devices.

For the KNX integration, LOYTEC’s L‑INX/L‑ROC/L‑GATE devices use an ETS4/ETS5 project. The project data is exported from the ETS4/ETS5 software and then imported in the LOYTEC L‑INX Configurator. Thus, up to 250 or 1 000 data points from the KNX network can be used by the L‑INX/ L‑ROC/ L‑GATE devices on each port supporting KNXnet/ IP or KNX TP1.

Features

• KNX TP1 Interface for L‑INX, L‑ROC, and L‑GATE
• Access to a maximum of 250 or 1 000 KNX data points via KNX TP1 (L‑INX/L‑ROC/L‑GATE)
• Configurable through ETS4/ETS5 software via XML import
• Connected to the L-INX Automation Server, L-ROC Room Controller or L-GATE Gateway via port EXT

KNX TP1 Interface

LKNX-300

KNX interface to connect KNX TP1 devices

• Contact Sales for quote request
• Documentation and Software

The post KNX TP1 Interface appeared first on Kepler Electronics.