Kepler Archives - Kepler Electronics

KE-AC-TGW

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

Smart Combined Gateway & Thermostat FOR DX UNIT

The post KE-AC-TGW appeared first on Kepler Electronics.

KSTAT-FC11-NM-24

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

MODULATING MODBUS THEMROSTAT with 24 VAC output for Valve

The post KSTAT-FC11-NM-24 appeared first on Kepler Electronics.

KSTAT-FC11-W

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

ON / OFF WIFI THEMROSTAT

ON/OFF WIFI THEMROSTAT

The post KSTAT-FC11-W appeared first on Kepler Electronics.

KSTAT-FC11-N-2

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

ON / OFF MODBUS THEMROSTAT with 2 Digital input

The post KSTAT-FC11-N-2 appeared first on Kepler Electronics.

KE-AC-VRF

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

UNIVERSAL GATEWAY FOR VRF

The post KE-AC-VRF appeared first on Kepler Electronics.

KSTAT-FC11-WM

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

MODULATING WIFI THEMROSTAT

The post KSTAT-FC11-WM appeared first on Kepler Electronics.

KSTAT-FC11-NM

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

MODULATING MODBUS THEMROSTAT

The post KSTAT-FC11-NM appeared first on Kepler Electronics.

KSTAT-FC11-N

Maen Sirhan — Tue, 29 Oct 2024 08:18:42 +0000

ON / OFF MODBUS THEMROSTAT

The post KSTAT-FC11-N appeared first on Kepler Electronics.

KZIG-IR

Maen Sirhan — Mon, 16 Sep 2024 11:17:19 +0000

The Universal Infrared Air Conditioner to Home Automation Interface.

Smart Universal InfraRed gateway with built temp sensor and humidity sensor enables seamless and effortless integration of any Air Conditioner unit (equipped with an infrared receiver) with LOYTECbased Home Automation Systems, and any 3rd party brand.

Features

Simple and fast setup (just plug in the gateway and set it up using the Kepler app). Use the autolearn feature to have the IR remote controller’s settings automatically saved. Controlling the air conditioner at the same time via the infrared remote and home automation systems is possible. As a result of our open Internet of Things protocol, we can integrate with any IP home automation system.

INTELLIGENT CONNECTIVITY WITH THE INDOOR UNIT

The primary AC operations can be controlled by means of infrared commands
thanks to the gateway. Furthermore, the device’s integrated temperature and
humidity sensors allow the user to monitor the room’s actual state and dew
point, even when using the manufacturer’s infrared remote control.
KEPLER Home Automation gateways are the most effective AC integration
solution for home automation systems because of their unique design. Zigbee
3.0 is a straightforward protocol that can be readily integrated into Home
Controllers or Smart Hubs as a driver. You can easily integrate and regulate air conditioning units with from various home automation platforms on the market.

Specifications

Part No.	KZIG-IR
Description	Smart Home IR Gateway
Protocol	Zigbee 3.0
Type	Zigbee to IR Signal (Wireless)
Series	Wireless Home Automation
Infrared Distance	10 Meter
Infrared Angle	360 Degree
Infrared Frequency	38KHz
Power supply	DC 5V/1A (Micro USB adapter 220 VAC Included)
Mobile App	Kepler Home / LWEB -APP
Temperature	0℃-40℃

The post KZIG-IR appeared first on Kepler Electronics.

KDMX-GWi

Maen Sirhan — Tue, 21 May 2024 05:57:13 +0000

loT DMX CONTROLLER – 4 PORTS

Leverage the capabilities of Kepler electronics in dynamic architectural lighting with an innovative, userfriendly, and functional control system that revolves around a solitary, dependable forget-it-controller. KOMX Control is ideal for architectural lighting that necessitates the advantages of dynamic movement and color in a user-friendly and economical format, with the capability to manage up to 2048 channels. LWEB software provides assistance and direction duning controller programming.
With the dependability you anticipate from KEPLER and our knowledge of dynamic lighting in entertainment and architecture: a control solution that is simple to install and operate.
KOMX-GWi series are powerful, programmable OMX controllers, which can programmed by node.js.

The KOMX gateway is capable of hosting graphical pages that are specific to the user and can incorporate physical inputs and outputs using four channels of RS 485.

One Controller

The powerful KOMX Gateway offers connectivity functions that allow for the simultaneous integration of BACnet, KNX, Modbus, and OPC Systems. These systems can integrated using Ethernet/IP communications.
It is possible to communicate data between all of the communication technologies that are present on the device thanks to the gateway capability. Different data points pertaining to technology are mapped on the device by means of the Local Connections capability. Global Connections provides help for the mapping of various technological data points on devices that are scattered throughout multiple locations.

Two Ethernet connector, which may be linked to a Wide Area Network (WAN) with HTIPS enabled, is included in each KOMX gateway. Additionally, there are two USB 2.0 Type A ports and an HOMI port, both of which are capable of supporting 4K 30 frames per second output. One can easily set up a virtual private network (VPN) and gain secure access to remote locations using the built-in VPN capability.
While the KOMX is capable of providing fully fledged ASTM functionality (including Alarming, Scheduling, and Trending), it can be also be perfectly integrated into the L-WEB System by the user.

loT Integration

Using the Internet of Things (loT) function, which is built on Nodes.js it is possible to connect the system to virtually any cloud service. This can be done for a variety of purposes, including the uploading of historical data to analytics services, the use of MOTT for telemetry, the transmission of alarm messages to alarm processing services, or the operation of certain components of the control system through a cloud service (for example, scheduling based on Web calendars or booking systems). Additionally, it is feasible to process information from the Internet, such as weather data, in order to perform forecast-based control. Last but not least, the JavaScript kernel also makes it possible to build serial protocols to nonstandard equipment in primary plant control.

Specifications

DMX512	4 ports (max 512 channels each port)
Power Input	7-36V
Dimension	1239832 mm
Networking	Gigabit Ethernet RJ45 connector, 100M Ethernet RJ45 connector
USB	USB 2.0 Type A x 2
Connector	Isolated RS485 x 4, Power screw terminal x 1
RTC	Real-time clock with battery socket
Fan Header	allows speed adjustment, 5V
Indicator	Power indicator x 1, PCB status indicator x RS485 communication indicator x 8
Temperature	0 ~ 40 C°
Humidity	10-90% relative, non condensing

The post KDMX-GWi appeared first on Kepler Electronics.

KMOD-RM32

Maen Sirhan — Wed, 15 May 2024 13:36:01 +0000

Smart 32-Ch Relay Module, Modbus RS485 Interface, With Multiple Isolation Protection Circuits

KMOD-RM32 is an industrial 32-ch relay module controlled via RS485 bus, adopts Modbus RTU protocol, built-in protection circuits such as power supply isolation, magnetically isolation, resettable fuse, and TVS diode, etc, It also comes with an ABS case.

Product Features

Easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipment’s and/or applications with high communication requirements.
Configurable device address (1-255), multi devices can cascaded on RS485 bus
Features flash-on, flash-off function, it is possible to turn on the relay for a while and then close it automatically via the command
Onboard voltage regulator chip, supports 7-36V wide voltage power supply
Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
Onboard unibody magnetically isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, provides over-current/over voltage proof, lightning proof & anti-electrostatic
Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit
Onboard dedicated relay driver chip, with built-in freewheeling diode protection, the driving ability is stronger and more stable
Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection
High quality relay, contact rating: 1QA 250VAC/30VDC Rail-mounted ABS case, easy to install, safe to use
3 LEDs for indicating the MCU status and signal transceiving status

Product Specifications

OPERATING VOLTAGE	7-36V
COMMUNICATION INTERFACE	RS485
BAUDRATE	4800,9600, 19200,38400,57600, 115200, 128000, 256000
DEFAULT COMMUNICATION FORMAT	9600, N, 8, 1
RELAY CHANNELS	32
CONTACT FORM	1NO 1NC
CONTACT RATING	≤1OA 250VAC/30VDC
COMMUNICATION PROTOCOL	Standard Modbus RTU protocol
RS485 ADDRESS	1-255
LED INDICATORS	STA: MCU indicator, keep flashing when the MCU normally working TXD: TX indicator, lights up when sending data RXD: RX indicator, lights up when receiving data

The post KMOD-RM32 appeared first on Kepler Electronics.

KPAD-10″/7″ IoT Touch Screen

Maen Sirhan — Fri, 10 May 2024 13:09:45 +0000

10 & 7 inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface

Touch panels of the KPAD-10/7 variety are optimal for use in home automation and intercom for both operation and visualization. KPAD-10/7 Touch Panels are versatile in their applications, functioning as room operator panels, network thermostats, room controllers, and cruise ship compartments, private residences, conference rooms, and hotel rooms. They also feature an integrated capacitive touch screen. The KPAD-10/7 touch panels are powered by a high speed processor that consumes negligible amounts of energy. The KPAD-10/7 is constructed with a lengthy lifespan in mind and receives firmware updates on a regular basis to ensure optimal security. KPAD-10/7 is distinguished by its enduring aesthetic, seamless assimilation into contemporary and historic structures, and exceedingly intuitive operation. Mounting the all-view IPS display in either a horizontal or vertical orientation is possible. Its mere 5 mm thickness enables it to be affixed flush to the wall.

Features

7/10-inch IPS screen with a hardware resolution of 1280 x 800
5/10-point capacitive touch, with tempered glass panel, hardness up to 6H.
Using optical bonding touch technology, the display effect is better.
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
Support multi-language OSD menu (can be used for power control, adjusting brightness/ contrast, etc.)
Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

Integration of the Internet of Things

The IoT functionality (Node.js) built in all KPAD-10/7 variants enables the system to connect to nearly any cloud service. This can be done for a variety of purposes, including the uploading of historical data to analytics services, the use of MQTT for telemetry, the transmission of alarm messages to alarm processing services, or the operation of certain components of the control system through a cloud service (for example, scheduling based on Web calendars or booking systems). Additionally, it is feasible to process information from the Internet, such as weather data, in order to perform forecast-based control. Last but not least, the JavaScript kernel also makes it possible to build serial protocols to non-standard equipment in primary plant control.

Dimensions

The post KPAD-10″/7″ IoT Touch Screen appeared first on Kepler Electronics.