Accessories Archives - Kepler Electronics https://kepler-elec.com/tag/accessories/ LOYTEC COMPETENCE CENTER Wed, 12 Jun 2024 13:37:31 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://kepler-elec.com/wp-content/uploads/1/2023/10/cropped-cropped-cropped-cropped-Kepler-Elec-Logo-2023-09-18-13-45-04-32x32.jpg Accessories Archives - Kepler Electronics https://kepler-elec.com/tag/accessories/ 32 32 L-Term Network Terminator (BACnet MS/TP, Modbus RTU or RS-485) https://kepler-elec.com/2024/06/02/l-term-network-terminator/ Sun, 02 Jun 2024 17:07:38 +0000 https://kepler-elec.com/?p=6163 L-Term Network Terminator (BACnet MS/TP, Modbus RTU or RS-485)

The post L-Term Network Terminator (BACnet MS/TP, Modbus RTU or RS-485) appeared first on Kepler Electronics.

]]>
LT-048
LT-B4

LOYTEC offers network terminators for RS‑485 channels (ANSI TIA/‌EIA‑485) such as BACnet MS/‌TP, Modbus RTU, or TP/RS485 (CEA‑709) in DIN rail housings.

L-Term LT-04 is a terminator for RS‑485 channels. In addition, LT-04 comes with a network access connector (RJ45) for a simple and reliable connection to the network e.g. for maintenance or analyzing the network locally.

The LT-B4 is a bus terminator for an RS‑485 channel with biasing circuit (failsafe biasing). This biasing circuit draws the level of the bus during standby mode (idle) to a safe value (logic “1”). The LT-B4 needs a power supply of 24 V AC or 24 V DC.

LPOW LINX 150 LT 33

L-Term Network Terminator (BACnet MS/TP, Modbus RTU or RS-485) Products

LT-04

LT-048

Network terminator for 1 x RS‑485 (bus topology, ANSI TIA/EIA-485), 1 x Network Access Connector RJ45

LT-B4

LT-B4

Network terminator, 1 x RS‑485 (bus topology, ANSI TIA/EIA-485) with biasing circuit (failsafe biasing)

The post L-Term Network Terminator (BACnet MS/TP, Modbus RTU or RS-485) appeared first on Kepler Electronics.

]]> L-ACT Actuators https://kepler-elec.com/2024/04/02/l-act-actuators/ https://kepler-elec.com/2024/04/02/l-act-actuators/#respond Tue, 02 Apr 2024 16:24:38 +0000 https://kepler-elec.com/?p=4167 The L-ACT are communicative actuators for adjusting dampers in building installations.

The post L-ACT Actuators appeared first on Kepler Electronics.

]]>

L-ACT Actuators
L-ACT Actuators

Features

  • Air damper size up to approximately 1 m², 10.76 ft ²
  • Torque motor 5 Nm, 45in-lb
  • Nominal voltage AC/DC 24 V
  • Communication via Belimo MP-Bus

L-ACT Actuators

L-ACT101-MP

L-ACT Actuators

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

L-ACT Actuators

Actuator 3/4‘‘, 5Nm, MP-Bus cable

L-ACT-FRAME1

L-IOB I/O Controller: 6 UI, 2 AO, 5 DO (5 x Triac 0.5 A), 1 Pressure Sensor

LIOB-585

LIOB-585

L-IOB I/O Controller: 6 UI, 2 AO, 5 DO (5 x Triac 0.5 A), 1 Pressure Sensor

The post L-ACT Actuators appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-act-actuators/feed/ 0 DVS-110W02-3SFP Managed Industrial Ethernet Switch https://kepler-elec.com/2024/04/02/dvs-110w02-3sfp-managed-industrial-ethernet-switch/ https://kepler-elec.com/2024/04/02/dvs-110w02-3sfp-managed-industrial-ethernet-switch/#respond Tue, 02 Apr 2024 16:20:32 +0000 https://kepler-elec.com/?p=4163 The DVS‑110W02‑3SFP Managed 10‑Port Ethernet Switch provides many essential features.

The post DVS-110W02-3SFP Managed Industrial Ethernet Switch appeared first on Kepler Electronics.

]]>

DVS-110W02-3SFP Managed Industrial Ethernet Switch

The DVS‑110W02‑3SFP Managed 10‑Port Ethernet Switch provides many essential features. Its enhanced hardware design, the user‑friendly software interface, the packet protection and compatibility with multiple industrial communication standards makes it a highly reliable active network component.

The DVS‑110W02‑3SFP provides two built-in redundant power supplies and together with its RSTP support it is the perfect fit for building up highly available Ethernet ring topologies for L-INX, L-IOB, and L-ROC controller.

It features a wide operating temperature range from ‑40°C to 75°C, and it is UL, CE, and FCC certified.

Features

  • IPv6 Network address for larger network and neighbor discovery
  • Automatic IP assignment by DHCP/BootP server for easy network construction
  • DHCP relay option 82 for sending DHCP requests with clients’ identities to a DHCP server
  • SNMP v1/v2c/v3 facilitates the exchange of management between network devices
  • Support MODBUS TCP protocol that facilitates the remote management by SCADA and other industrial devices
  • STP/RSTP/MSTP for network redundancy further ensures reliability
  • QoS(IEEE 802.1p) and TOS/DSCP for mission-critical applications
  • IEEE 802.1Q VLAN, Port-based VLAN and GVRP to optimize network strategy
  • SNTP (simple network time protocol) for network clock synchronization
  • Broadcast/Multicast/Unknown Unicast storm control improves throughput problems
  • MAC addresses locking function per port blocks unauthorized access
  • USB console interface for easy connection with laptops
  • IGMP Snooping and GMVP prunes multicast traffic
  • CPU utilization displays the amount of works the CPU handles
  • DDM diagnosis function by SFP fiber module
  • Auto warning by email, DI, relay, Syslog & SNMP trap
  • Compatible with various industrial protocols, EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0

DVS-110W02-3SFP Managed Industrial Ethernet Switch

LOYDVS-110W02-3SFP

LOYDVS-110W02-3SFP

Managed 10-Port Fast Ethernet Switch

LOYDVS008I00

LOYDVS008I00

Unmanaged 8-Port Fast Ethernet Switch

The post DVS-110W02-3SFP Managed Industrial Ethernet Switch appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/dvs-110w02-3sfp-managed-industrial-ethernet-switch/feed/ 0 DVS-008I00 Unmanaged Fast Ethernet Switch https://kepler-elec.com/2024/04/02/dvs-008i00-unmanaged-fast-ethernet-switch/ https://kepler-elec.com/2024/04/02/dvs-008i00-unmanaged-fast-ethernet-switch/#respond Tue, 02 Apr 2024 16:19:35 +0000 https://kepler-elec.com/?p=4158 The DVS‑008I00 is an unmanaged 8‑Port Fast Ethernet Switch with enhanced hardware design, packet protection and compatibility with multiple industrial communication standards.

The post DVS-008I00 Unmanaged Fast Ethernet Switch appeared first on Kepler Electronics.

]]>

DVS-008I00 Unmanaged Fast Ethernet Switch

The DVS‑008I00 is an unmanaged 8‑Port Fast Ethernet Switch with enhanced hardware design, packet protection and compatibility with multiple industrial communication standards.

The DVS‑008I00 features wide operating temperature range from ‑40°C to 75°C, and it is UL, CE, and FCC certified.

Features

  • 12 to 48 VDC terminal block power input
  • Compatible with various industrial protocols of EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0

DVS-008I00 Unmanaged Fast Ethernet Switch

LOYDVS008I00

Unmanaged 8-Port Fast Ethernet Switch

Unmanaged 8-Port Fast Ethernet Switch

LOYDVS-110W02-3SFP

Managed 10-Port Fast Ethernet Switch

Managed 10-Port Fast Ethernet Switch

The post DVS-008I00 Unmanaged Fast Ethernet Switch appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/dvs-008i00-unmanaged-fast-ethernet-switch/feed/ 0 LOYRTU-485 Modbus Remote I/O Communication Module https://kepler-elec.com/2024/04/02/loyrtu-485-modbus-remote-i-o-communication-module/ https://kepler-elec.com/2024/04/02/loyrtu-485-modbus-remote-i-o-communication-module/#respond Tue, 02 Apr 2024 16:15:32 +0000 https://kepler-elec.com/?p=4153 The LOYRTU-485 is a Modbus remote I/O communication module to remote-control Slim series DI/DO and AI/AO extension units.

The post LOYRTU-485 Modbus Remote I/O Communication Module appeared first on Kepler Electronics.

]]>
LOYRTU-485 Modbus Remote I/O Communication Module

The LOYRTU-485 is a Modbus remote I/O communication module to remote-control Slim series DI/DO and AI/AO extension units. The RTU-485 is a standard Modbus slave compatible with LOYTEC devices featuring a Modbus Interface supporting Modbus master mode.

The LOYRTU-485 is UL, CE, and FCC certified.

Features

  • Supports Modbus protocol, slave mode
  • Connects up to 8 DVP-S series I/O modules
  • Max. baudrate: 115.2k bpsk

LOYRTU-485 Modbus Remote I/O Communication Module Products

LOYRTU-485

LOYRTU-485

Modbus Remote I/O Communication Module

The post LOYRTU-485 Modbus Remote I/O Communication Module appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/loyrtu-485-modbus-remote-i-o-communication-module/feed/ 0 LBOX-600 System Distribution Box https://kepler-elec.com/2024/04/02/lbox-600-system-distribution-box/ https://kepler-elec.com/2024/04/02/lbox-600-system-distribution-box/#respond Tue, 02 Apr 2024 16:11:19 +0000 https://kepler-elec.com/?p=4150 With L-BOX System Distribution Boxes, LOYTEC offers the possibility of a decentralized installation of hardware components, e.g. for the flexible room automation system L-ROC.

The post LBOX-600 System Distribution Box appeared first on Kepler Electronics.

]]>

LBOX-600 System Distribution Box

With L-BOX System Distribution Boxes, LOYTEC offers the possibility of a decentralized installation of hardware components, e.g. for the flexible room automation system L-ROC.

For the typical requirements of room automation projects with reoccurring segments, the hardware designed for a certain amount of segments (e.g. 8 or 16 segments, usually I/O modules) can be installed in L-BOX. L-BOX is normally mounted in an intermediate ceiling or double floor. The cabling of the field components in the segment (sunblind motor, actuators for valves, window contacts etc.) can be connected to the L-BOX in a star topology. In the L-BOX, the cables are strain-relieved and directly wired to the I/O modules.

LBOX-600 System Distribution Box Products

LBOX-600

L-BOX System Distribution Box for room automation components, 600 x 250 x 82 (L x W x H in mm)

The post LBOX-600 System Distribution Box appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/lbox-600-system-distribution-box/feed/ 0 L-POW Power Supply https://kepler-elec.com/2024/04/02/l-pow-power-supply/ https://kepler-elec.com/2024/04/02/l-pow-power-supply/#respond Tue, 02 Apr 2024 16:09:54 +0000 https://kepler-elec.com/?p=4141 LPOW-2415A, LPOW-2415B and LPOW-2460B are used to supply power to LOYTEC devices.

The post L-POW Power Supply appeared first on Kepler Electronics.

]]>

L-POW Power Supply

LPOW-2415A

LPOW-2415A is used to supply power to LOYTEC devices with the LOYTEC LIOB‑Connect side outlet such as the L-INX Automation Servers, L-ROC Room Controller, L-GATE Universal Gateways and LIP-ME204. In addition, L-IOB I/O Modules and Controllers (except LIOB-585) can be powered by the LPOW-2415A.

l-pow_linx-x2x_liob

LPOW-2415B

The power supply LPOW-2415B provides 24 V DC via a plug-in screw terminal. It is used to supply power to LOYTEC devices with a separate power terminal of 24 V DC.

lpow-2415b_lip-3ectc

Energy -Efficient

The LPOW-2415 are highly efficient switching power supplies. Their efficiency is approximately 80 %. The input voltage range of 85–240 V AC (50–60 Hz) allows worldwide use.

LPOW-2460B

The LPOW‑2460B power supply provides 24 V DC and maximum 60 W with screw terminals. It is used to supply power to LOYTEC devices with a separate power terminal of 24 V DC.

L-POW Power Supply Products

LPOW-2415A

L-POW Power Supply

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LPOW-2460B

LPOW-2460B

Power supply unit with power connector 24 V DC, 60 W

The post L-POW Power Supply appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-pow-power-supply/feed/ 0 L-Term Network Terminator (TP/FT-10 and TP/XF-1250) https://kepler-elec.com/2024/04/02/l-term-network-terminator-tp-ft-10-and-tp-xf-1250/ https://kepler-elec.com/2024/04/02/l-term-network-terminator-tp-ft-10-and-tp-xf-1250/#respond Tue, 02 Apr 2024 16:09:12 +0000 https://kepler-elec.com/?p=4146 Network terminators in DIN rail housings for the LonMark TP/FT-10 and TP/XF-1250 channels.

The post L-Term Network Terminator (TP/FT-10 and TP/XF-1250) appeared first on Kepler Electronics.

]]>

L-Term Network Terminator (TP/FT-10 and TP/XF-1250)
LT-33
LT-13

LOYTEC offers several network terminators in DIN rail housing for the LonMark TP/FT-10 and TP/XF-1250 channels.
L-Term LT-03 offers one standard network terminator for a TP/FT-10 or TP/LPT-10 channel supporting bus and free topology. In addition, LT-03 comes with a network access connector (RJ45) for a simple and reliable connection to the CEA‑709 network e.g. for maintenance or analyzing the network locally.
L-Term LT-33 offers two standard network terminators for TP/FT-10 or TP/LPT‑10 channels in bus and free topology. LT-33 is the perfect solution for LOYTEC network infrastructure products (e.g. L-IP, L-SwitchXP, L-Proxy etc.).
L-Term LT-13 combines a terminator for a TP/FT-10 or TP/LPT-10 channel in bus or free topology with a terminator for a TP/XF-1250 channel. LT-13 is the perfect solution to be used together with the LS-13CB, LS-13300CB, or the LS-13333CB L-SwitchXP.

LT 33 LIP 33ECTC

L-Term Network Terminator (TP/FT-10 and TP/XF-1250) Products

LT-03

L-Term Network Terminator

Network terminator for 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x Network Access Connector RJ45

LT-13

LT-13

Network terminator for: 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x TP/XF-1250 (bus toplogy only)

LT-33

LT-33

Network terminator for 2 x TP/FT-10 or TP/LPT-10 (bus or free topology)

The post L-Term Network Terminator (TP/FT-10 and TP/XF-1250) appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-term-network-terminator-tp-ft-10-and-tp-xf-1250/feed/ 0