L-DALI: BACnet/DALI Controllers

Maen Sirhan — Tue, 02 Apr 2024 15:12:21 +0000

L-DALI:-ME201-U BACnet/DALI Controllers

LDALI-ME202-U BACnet/DALI Controller

LDALI-ME204-U BACnet/DALI Controller

L‑DALI Controllers are multifunctional devices combining constant light control, sunblind control and gateway functions between DALI (Digital Addressable Lighting Interface) and BACnet or Modbus systems. With Alarming, Scheduling, Trending and e-mail notification (AST) the L‑DALI Controller is a perfect solution for DALI lighting systems and for a smooth DALI integration into BACnet or Modbus networks.

DALI Network Interface

L-DALI Controllers act as a DALI-Master in the DALI network which can interact with DALI-2 multi-sensors and buttons in Multi-Master mode. The L-DALI Controllers feature 1, 2, or 4 independent DALI channels. Up to 64 DALI or DALI-2 based luminaries per DALI channel can be controlled individually or via 16 groups. All luminaries are monitored for lamp or ballast defect. In addition up to 64 DALI-2 input devices are supported per DALI channel. Each input device can be equipped with push buttons, sliders, occupancy and light sensors.

Built-In DALI Power Supply

All L-DALI models come with a built-in DALI bus power supply. The LDALI-ME201-U/LDALI-ME202-U can supply its DALI channel with a guaranteed supply current of 230 mA, the LDALI-ME204-U can supply 116 mA per channel. In case of the LDALI-ME204-U an external DALI bus power supply can be added to top up the supply current to 232 mA. External power supplies are available for up to four DALI channels. The internal DALI bus power can be switched on and off via web interface or LCD UI. Thanks to the switching power supply, these devices can handle input voltages from 85 – 240 V AC, 50/60 Hz.

BACnet Connectivity

The L‑DALI Controllers feature connectivity in BACnet networks via BACnet/IP, BACnet/SC or BACnet MS/TP. They also provide data exchange through Global Connections and support comprehensive AST functionality (Alarming, Scheduling, and Trending). Full L‑WEB integration is supported as well. The L‑DALI Controllers are equipped with two Ethernet ports including a built-in Ethernet switch.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment.

Local Operation and Override

The L‑DALI Controllers come with a built-in backlit display (128×64) and a jog dial for local operation and override. Using the local operation, maintenance tasks (DALI device replacement, burn-in mode, etc.) can be executed without the need of any software tool.

Constant Light Control

The integrated Constant Light Controller works with DALI and with BACnet devices. It supports various lighting control strategies, presence and lux level based. Several parameters can be used to configure the Constant Light Controller for almost any use case.

Sunblind Control with Constant Light Control Interaction

The integrated Sunblind Controller application allows intelligent controlling of blinds connected via SMI (requires LSMI-804). It offers effective sun and anti-glare protection through active slat control and slat adjustment according to the sun position. Energy efficiency is ensured by linking room occupancy with sun protection. If a room is unoccupied, the L‑DALI Controller opens or closes the sunblinds depending on the thermal requirements. This allows for instance to use the heat of the sun for heating in winter while in summer, the heat from the sun is reduced by the closed blinds to reduce the cooling load.

Optionally, the sunblind and light control applications of a room or an area can be linked together. As both applications control the light available in the room this holistic approach assures maximum comfort and energy efficiency.

In addition to the constant light and sunblind control, any mathematical calculation and function or logical operation (Boolean algebra) can be created on the device and process all available data points.

Device Configuration via Tool or Web Interface

The device configuration, commissioning, and parameterization is done either with the configuration tool software or via the integrated web server.

EnOcean, OPC and Modbus

EnOcean sensors and buttons can be integrated via the optional L‑ENO EnOcean interface. To use the L‑DALI with an existing SCADA solution all run-time values and parameters can be accessed via BACnet, OPC (XML/DA and UA) and Modbus TCP. 5, 10 or 15 devices can be connected via Modbus RTU (RS-485), the actual number of supported devices is dependent on the activated licenses (LIC-MOD5, LIC-MOD10 or both).

Advanced DALI Functions

DALI Sensors
The L-DALI Controllers support the integration of DALI-2 multi-sensors for presence detection and light level recognition. In addition to the LOYTEC multi-sensors LDALI-MS2-BT/MS3-BT/MS4-BT, DALI-2 sensors of many well-known manufacturers can be used. For asset tracking in office buildings with the LOYTEC multi-sensors (LDALI-MSx-BT), a LIC-ASSET license is required.
DALI Buttons
For manual operation, DALI-2 push button couplers, like the LDALI-BM2, DALI-2 operation panels and IR remote controls can be integrated into the system. Their functionality can be configured individually. In addition to controlling lighting via DALI (dimming, scene recall, etc.) and sunblinds via SMI (up, down, etc.), button press events can be propagated in the building network, triggering other, non-lighting related building automation functions.
DALI Relay Modules
Standard loads in the power grid can be controlled via DALI using DALI relay modules, like the LDALI-RM5 / LDALI-RM6 /LDALI-RM8.
DALI Color Control
The L-DALI allows controlling DALI luminaires with color control functionality (DT8). Both, tunable white (Tc) and full RGB color control (RGBWAF and xycoordinate) are supported. Light color can either be changed automatically, via manual operation (e.g. buttons) or via the network.
Auto Burn-In for Fluorescent Lamps
Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by L‑DALI for each lamp. After 100 hours burn-in time, the lamp’s constant light control is enabled.
Automatic Test of Emergency Lighting Systems
IIn DALI emergency lighting systems based on IEC 62386-202, L-DALI can be used for testing the sys-tem. The results can be logged.
Collection of Important Operational Parameters
For maximum transparency in the lighting system, L‑DALI can record the operating hours of each lamp and also the energy consumption (calculated).
DALI Device Replacement made Easy
Defective DALI ballasts can easily be replaced directly on the L‑DALI Controller (LCD and jog dial) or via the web interface. No software tool is necessary.

Smooth DALI integration into BACnet and Modbus Networks

The L‑DALI Controller maps information from the DALI network to BACnet objects or Modbus registers that are used to control DALI ballasts or to display operating states.

BACnet Interface

The following BACnet server objects are supported:

Analog Output objects to control DALI ballasts, groups, and channels
Multi-State Output objects for scene control of DALI groups and channels Analog Input objects providing feedback from DALI ballast, groups, and channels
Analog Input objects providing status information from DALI groups and channels
Accumulator objects providing estimated energy usage of DALI groups and channels
Multi-State Output objects to issue commands (start/stop emergency test or burn-in, change color temperature, etc.) to DALI ballasts, groups and channels
Analog Input objects providing battery status of emergency ballasts, groups
Analog Input objects providing lux level information from supported DALI sensors
(LDALI-MS2: additionally humidity and temperature information is provided)
Binary Input objects providing occupancy information from supported DALI sensors
Loop objects providing constant light controller functionality
Binary Input objects providing button information from supported DALI buttons
Various objects to control sunblinds

All data points are available on the web server in a tree structure and can be displayed and set via a web browser.

Features

DALI integration into BACnet networks
Supports up to 64 DALI ballasts and 16 DALI groups per DALI channel
Supports up to 64 input devices overall per channel
Up to 16 DALI sensors per DALI channel are supported
Up to 64 DALI button modules per DALI channel are supported
Integrated DALI bus power supply
Manual operation using the jog dial and local access to information about device status and data points in clear text and symbols
128×64 graphic display with backlight
Built-in web server for device configuration
Test and assignment of DALI devices on the web interface
Replacement of DALI devices without additional software tools via LCD and jog dial
Supports the control of standard loads in the power grid via LDALI-RM3 Relay Modules
Integrated Constant Light Controller
Integrated Sunblind Controller
Supports DALI-2 devices (drivers and input devices)
DALI-2 certified (compliant with IEC 62386-101 and IEC 62386-103)
Support DALI color control (DT8 tunable white & full color control)
Supports lamp burn-in mode
Supports periodic testing of DALI emergency lights
Integrated DALI Protocol Analyzer
Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
Supports BACnet MS/TP, BACnet/IP or BACnet/SC
BACnet Client Function (Write Property, Read Property, COV Subscription)
B-BC (BACnet Building Controller) functionality, BTL certified
Alarming, Scheduling, and Trending (AST) locally or embedded in L‑WEB (building management)
Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
Event-driven e-mail notification
Supports Local and Global Connections
Stores customized graphical pages
Visualization of customized graphical pages through LWEB‑900 (building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
Stores user-defined project documentation
Dual Ethernet/IP interface
Built-in OPC XML‑DA and OPC UA server
Modbus TCP or Modbus RTU/ASCII (Master or Slave)
Supports SMI (Standard Motor Interface) through LSMI-804
Connection to EnOcean wireless devices via LENO‑80x Interface
Supports WLAN through LWLAN‑800 Interface
Supports LTE through LTE‑800 Interface
Modbus RTU/ASCII for 5 devices (LIC-MOD5 required), 10 devices (LIC-MOD10 required) or 15 devices (LIC-MOD5 and LIC-MOD10 required)
Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution

Tutorials

L-DALI 7.4 Release Tutorial – Features of the new DALI Release

This video provides a detailed overview on the new features of the latest firmware release.

Features of L-INX 8.0 Release

This video presents some features of the newfirmware release.

L-DALI: BACnet/DALI Controllers Products

LDALI-ME201-U

BACnet/DALI Controller, 1 DALI channel, integrated DALI power supply

LDALI-ME202-U

BACnet/DALI Controller, 2 DALI channel, integrated DALI power supply

LDALI-ME204-U

BACnet/DALI Controller, 4 DALI channels, integrated DALI power supply

LIC-ASSET

LIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)

Contact Sales for quote request

LIC-MOD5

License to add 5 Modbus devices for LDALI-ME201-U, LDALI-ME202-U, LDALI-ME204-U

LIC-MOD10

License to add 10 Modbus devices for LDALI-ME201-U, LDALI-ME202-U, LDALI-ME204-U

LDALI-PWR1-U

DALI Power Supply for 1 DALI channel, 50mA

LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LDALI-PD1

DALI Phase-Cut Dimmer Module

L-RC1

Infrared remote control for room automation applications

LDALI-BM2

Quadruple DALI pushbutton coupler

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

LDALI-RM8

DALI Relay Modul, 8 channel

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LWLAN-800

EnOcean Interface 868 MHz Europe

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

EnOcean Interface 928 MHz Japan

LTE-800

LTE Interface

LRS232-802

USB to 2x RS-232 Interface

LDALI-PWM4

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext

LDALI-PWM4-RGBW

PWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

The post L-DALI: BACnet/DALI Controllers appeared first on Kepler Electronics.

IoT Archives - Kepler Electronics