DALI Relay Module + DALI to 0/1-10V Converter KDALI-RM-10V

The KDALI-RM-10V is a DALI relay module plus DALI to 0/1-10V converter which is capable of switching both AC and DC loads and controlling 0/1-10V dimmable loads, The max switching voltage for AC loads is 250V, and the max switching voltage for DC loads is 50V. The DALI RM enables to integrate existing loads which do not have DALI input into DALI circuit and switch on/off the loads. The DALI to 0/1-10V converter enables to integrate 0/1-10V dimmable loads into DALI circuit and control the loads via DALI.
The max. load capacity for conventional incandescent and halogen light sources is 1000W (5) 2 30V, and max. load capacity for LED light sources is 300W @ 230V. It is easy to be installed into existing standard wall boxes or mounted on 35mm DIN rail with an extra mounting bracket.

Key Features

• DALI relay module + DALI to 0/1-10V converter
• 2 in 1 DT6 & DT7 versions available
• DALI-2 certified
• Enable to switch power of the 0/1-10V load through the relay
• DALI bus powered, no extra power supply required
• 1 DALI address can be assigned by DALI master controller
• Control of one standard contactor
• Compact relay module for controlling a standard contactor via DALI
• Loads that do not have a DALI input, can therefore integrated in the DALI circuit
• The loads can be switched on and off via DALI
• Compatible with universal DALI systems and master controllers in the market
• Mini Size, easy to be Installed into a standard wall box
• 5 years warranty
• Waterproof grade: IP20

Specification

Product Dimension

Wiring Diagram

The post KDALI-RM-10V appeared first on Kepler Electronics.

4 Channels DIN Rail DALI + Push Phase Dimmer KDALI-PH-4CH

The KDALI-PH-4CH is a DALI + Push phase cut dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to control phase cut dimmable LED lamps, traditional incandescent and halogen lights. It is also compatible with universal phase cut dimmable LED drivers.The DALI phase dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer adopts trailing edge dimming (reverse-phase control) and comes with 4 channels and maximum 1.8A per channel output. 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI phase dimmer can be compatible with universal DALI systems.
It is designed with DIN rail installation style,and can be easily mounted on standard 35mm DIN rail.

Key Features

• DALI certified
• TUV CE certified
• Safe and reliable full isolation design
• 100-240VAC input and 100-240VAC output
• 4 channel, maximum 1.8A per channel output
• DALI control interface with digital numeric digital display to set and show DALI address freely
• Can be controlled by existing push button switch even without a DALI system
• 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately
• Trailing edge dimming (reverse-phase control)
• Great compatibility with universal DALI master controllers
• Innovative minimum brightness setting function
• To dim and switch phase cut dimmable LED lamps, traditional incandescent and halogen lights
• Compatible with universal phase cut dimmable dimmable LED drivers

Specification

Wiring Diagram

The post KDALI-PH-4CH appeared first on Kepler Electronics.

• Contact Sales for quote request
• Download KDALI-PH-2CH User Manual

2 Channels AC Triac DALI Dimmer KDALI-PH-2CH

The KDALI-PH-2CH is a Triac DALI dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to dim and switch single color LED lamps, traditional incandescent and halogen lights. It is also compatible with universal triac dimmable LED drivers. The DALI dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer is trailing edge dimming (reverse- phase control) and comes with 2 channels and maximum 1.2A per channel output. 1/2 DALI addresses can be settable to control 2 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI dimmer can be compatible with universal DALI master controllers.

Key Features

• DALI certified
• TUV CE certified
• Safe and reliable full isolation design
• 100-240VAC input and 100-240VAC output
• 2 channel, maximum 1.2A per channel output
• DALI control interface with digital numeric digital display to set and show DALI address freely
• 1/2 DALI addresses can be settable to control 2 output channels synchronously or separately
• Trailing edge dimming (reverse-phase control)
• Great compatibility with universal DALI master controllers
• Innovative minimum brightness setting function
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Compatible with universal triac dimmable LED drivers

Specification

Wiring Diagram with Dimmable LED Light

Wiring Diagram with Dimmable LED Driver

The post KDALI-PH-2CH appeared first on Kepler Electronics.

DALI + Push AC Phase Cut Dimmer KDALI-PH-1CH

The KDALI-PH-1CH is an innovative AC phase cut dimmer with DALI and Push control interface. The AC dimmer is designed with 100-240VAC wide input and output, 1 channel and maximum 400W output. The DALI phase dimmer adopts trailing edge dimming. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The AC dimmer can be compatible with universal DALI systems. It is controllable from your DALI master controller or with an existing push button switch even without a DALI system

Key Features

• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2 interface, DALI DT6 device
• Match all DALI systems in the market
• AC phase cut dimmer with both DALI and push switch control interface
• 100-240VAC Wide Input and Output Voltage
• 1 DALI address to control 1 Channel Output, Up to 400W
• Input and Output with Screw Termina Is, Safe and Reliable
• Trailing edge dimming, supports resistive loads and capacitive loads
• Innovative minimum brightness setting function
• Single Wire Push Switch Input for Push Dim Function
• Great Compatibility with Universal 8V-230V- Input Push Switches
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Mini Size, Easy to be Installed into a standard size wall box

Specification

Product Dimension

Wiring Diagram

The post KDALI-PH-1CH appeared first on Kepler Electronics.

• L-FOCUS: L-DALI Lighting Control Solutions (English)
• LDALI-PD1 Datasheet
• L-DALI User Manual
• LDALI-PD1 Installation Instructions
• Certificates: EC / DALI-2
• Downloads

The LDALI‑PD1 module enables the control of phase‑cut dimmed consumers via a DALI channel. Typical application scenarios are the integration of 230V LED-retrofit‑bulbs or halogen lamps in DALI lighting applications.

The device supports a wide voltage range from 220‑240 V AC 50/60Hz. The LDALI‑PD1 is suitable for loads from 1VA up to 150VA. The load type (RL/RC) is automatically detected and used to select a suitable dimming‑method (leading or trailing edge phase‑cut). The dimming range is 3%‑100%.

The integration of the module in the DALI network follows the same simple steps as the integration of a DALI lamp. The device supports the DALI‑specification IEC 62386‑205 (Device Type 4, “Incandescent lamp”). The LDALI‑PD1 modules are directly connected to a DALI‑channel and also supplied with energy by that channel. Thus in case of a system failure the intended state of the output is off.

The LDALI‑PD1 is equipped with an open‑circuit detection that indicates a lamp failure if no load is connected.

The LDALI‑PD1 is designed for installation in distribution boxes or behind standard plugs in installation boxes.

Features

• Easy integration into LOYTEC L-DALI lighting system and LROC-40x room automation controllers
• Device configuration with the free LINX Configurator or via the built-in web server of the L-DALI controller
• Dimmable built-in phase-cut dimmer
• Automatic load detection and selection of leading or trailing edge phase-cut dimming
• Suitable for phase-cut dimmed consumers like dimmable retrofit LED and CFL lamps, halogen lamps, …
• Wide range voltage support (220‑240 V AC 50/60Hz)
• Up to 64 LDALI‑PD1 modules per DALI channel with sufficient dimensioned bus supply
• Supplied via DALI channel
• Electrically isolated between DALI and mains
• Open circuit detection
• DALI specification IEC 62386‑102 and IEC 62386‑205 supported
• Firmware update via DALI

LDALI-PD1 Phase-Cut Dimmer Module Products

LDALI-PD1

DALI Phase-Cut Dimmer Module

• Contact Sales for quote request
• Documentation and Software

DALI-2

The post LDALI-PD1 Phase-Cut Dimmer Module appeared first on Kepler Electronics.