Room Controllers Archives - Kepler Electronics https://kepler-elec.com/category/products/iot-home-automation/room-controllers-iot-home-automation/ LOYTEC COMPETENCE CENTER Sat, 28 Jun 2025 14:55:55 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://kepler-elec.com/wp-content/uploads/1/2023/10/cropped-cropped-cropped-cropped-Kepler-Elec-Logo-2023-09-18-13-45-04-32x32.jpg Room Controllers Archives - Kepler Electronics https://kepler-elec.com/category/products/iot-home-automation/room-controllers-iot-home-automation/ 32 32 KIOT-CN-ZIG https://kepler-elec.com/2025/06/11/kiot-cn-zig/ Wed, 11 Jun 2025 16:12:47 +0000 https://kepler-elec.com/?p=7287 IoT UNITARY CONTROLLER The KIOT-CN-ZIG Room Controller is an extension...

The post KIOT-CN-ZIG appeared first on Kepler Electronics.

]]>

IoT UNITARY CONTROLLER

The KIOT-CN-ZIG Room Controller is an extension of Kepler’s technology that provides a diverse range of interfaces, including wired, wireless, and electrical connections. It was developed to facilitate sophisticated hotel room, apartment, and villa automation applications. The Zigbee 3.0 and Bluetooth Mesh (SIG) interface is the most important aspect of this product since it allows for the integration of Zigbee and Bluetooth Mesh sensors, luminaires, and other actuators. The device is designed to address the requirement for a decrease in the amount of wiring in both new buildings and retrofit situations.

Additionally, the KIOT-CN Room Controller is capable of integrating without any complications with native OPC networks as well as MODBUS Systems at the controller level. Together with the software known as node red, it is possible to develop flexible room solutions that can be easily altered to changing requirements during the course of the project with minimal work. A web-based room operation that is accomplished through a LWEB-802/803 dashboard is an essential component of the KIOT-CN system. Additionally, the system may automatically generate visuals for the KCP / KPAD / LPAD Touch Panel, which is used for local operation.

One Controller

The powerful KIOT-CN Controller offers connectivity functions that allow for the simultaneous integration of wired protocols over Wifi like KNX, Modbus, and OPC and wireless protocols Bluetooth 4.2, Bluetooth Low Energy (BLE) via onboard antenna, Zigbee 3.0 & Matter via USS.Built-in firmware, emulate standard UART interface, used to upgrade the original serial peripherals or expand additional serial UART via USB.
It is possible to communicate data between all of the communication technologies that are present on the device thanks to the gateway capability. Different data points pertaining to technology are mapped on the device by means of the Local Connections capability. Global Connections provides help for the mapping of various technological data points on devices that are scattered throughout multiple locations.Support free installation OS which built-in CDC driver or multifunctional high-speed VCP vendor driver.

Specifications


Processor64-bit 1 GHz Quad-core Processor, 8GB Memorey
RAM512MB LP DDR2 SDAM
Power input5V, via Micro USB or GP IO
Dimensions69.5042.5021.20 mm
Networking2.4GHz 802.11 b/g/n wireless LAN
BluetoothBluetooth 4.2, BLE, onboard antenna
USBmicro USB On-The-Go (OTG) connector, supports USB HUB expansion
VideoMini HDMI port, supports PAL and NTSC standard, supports HDMI (1.3 and 1.4), 640 x 350 to 1920 x 1200 pixels
InterfaceWeb Services (OP C XML-DA/UA, MODBUS TCP, HTTP, HTTPS, FTP, SSH, VNC, SNMP, BLE, ZIGBEE ,2.4G WIFI
Temperature0 ~ 40 C
Humidity10 ~ 90% relative, non condensing

The post KIOT-CN-ZIG appeared first on Kepler Electronics.

]]> KZIG-IR https://kepler-elec.com/2024/10/28/kzig-ir-2/ Mon, 28 Oct 2024 10:32:09 +0000 https://kepler-elec.com/?p=6485 Zigbee IR remote controller for TV/AC

The post KZIG-IR appeared first on Kepler Electronics.

]]> KZIG-IR

Zigbee IR remote controller for TV/AC

  • Zigbee IR remote controller for TV/AC Unit weight: 26g
  • LED indicator: blue
  • Infrared range: less than 10m
  • Size: 50*50*19mm
  • Type C input: DC5V/1A
  • Infrared frequency: 35KHZ
  • Zigbee frequency: IEEE802.15.4
  • Remark: needs to work with KEPLER zigbee gateway.

The post KZIG-IR appeared first on Kepler Electronics.

]]> KWF-IR https://kepler-elec.com/2024/10/28/kwf-ir/ Mon, 28 Oct 2024 10:32:09 +0000 https://kepler-elec.com/?p=6486 WiFi IR remote controller for TV/AC

The post KWF-IR appeared first on Kepler Electronics.

]]> KWF-IR

WiFi IR remote controller for TV/AC

  • WiFi IR remote controller for TV/AC Unit weight: 26g
  • LED indicator: blue
  • Infrared range: less than 10m
  • Size: 50*50*19mm
  • Type C input: DC5V/1A
  • Infrared frequency: 35KHZ
  • WiFi frequency:IEEE802.15.4,2.4GHz

The post KWF-IR appeared first on Kepler Electronics.

]]> KIOT-CN https://kepler-elec.com/2024/06/26/kiot-cn/ Wed, 26 Jun 2024 07:56:29 +0000 https://kepler-elec.com/?p=6211 KIOT-CN

The post KIOT-CN appeared first on Kepler Electronics.

]]>
KIOT-CN

IoT UNITARY CONTROLLER


The KIOT-CN Room Controller is an extension of Kepler’s technology that provides a diverse range of interfaces, including wired, wireless, and electrical connections. It was developed to facilitate sophisticated hotel room, apartment, and villa automation applications. The Zigbee 3.0 and Bluetooth Mesh (SIG) interface is the most important aspect of this product since it allows for the integration of Zigbee and Bluetooth Mesh sensors, luminaires, and other actuators. The device is designed to address the requirement for a decrease in the amount of wiring in both new buildings and retrofit situations.
Additionally, the KIOT-CN Room Controller is capable of integrating without any complications with native BACnet/IP networks as well as MODBUS Systems at the controller level. Together with the software known as node red, it is possible to develop flexible room solutions that can be easily altered to changing requirements during the course of the project with minimal work. A web-based room operation that is
accomplished through a LWEB-802/803 dashboard is an essential component of the KIOT-CN system. Additionally, the system may automatically generate visuals for the L-VIS / L-PAD Touch Panel, which is used for local operation.
The room controllers that we offer offer all of the standard interfaces. The USBs, HDMI, and Ethernet cables. When it comes to lighting, heating, cooling, ventilation, and sunblinds, our room automation library offers pre-built function modules for their respective functions. The room automation system is equipped with a built-in TLS encryption, which guarantees for its secure functioning.

One Controller

The powerful KIOT-CN Controller offers connectivity functions that allow for the simultaneous integration of wired protocols BACnet, KNX, Modbus, and OPC and wireless protocols BLE 5.0, Zigbee 3.0, 2.4G/5G Dual Band Wifi. These systems can be integrated using Ethernet/IP communications.
It is possible to communicate data between all of the communication technologies that are present on the device thanks to the gateway capability. Different data points pertaining to technology are mapped on the device by means of the Local Connections capability. Global Connections provides help for the mapping of various technological data points on devices that are scattered throughout multiple locations.
Two Ethernet connector, which may be linked to a Wide Area Network (WAN) with HTTPS enabled are included in each KIOT Controller. Additionally, there are 2 USB 2.0 Type A , 2 USB 3.0 Type A ports and 2xmicro HDMI ports (up to 4Kp60) HDMI port, both of which are capable of supporting 4K 30 frames per second output. One can easily set up a virtual private network (VPN) and gain secure access to remote
locations using the built-in VPN capability.
While the KIOT-CN is capable of providing fully fledged ASTM functionality (including Alarming,
Scheduling, and Trending), it can also be perfectly integrated into the L-WEB System by the user.

IoT Integration

Using the Internet of Things (IoT)
function, which is built on Nodes.js it is
possible to connect the system to
virtually any cloud service. This can be
done for a variety of purposes, including
the uploading of historical data to
analytics services, the use of MQTT for
telemetry, the transmission of alarm
messages to alarm processing services,
or the operation of certain components
of the control system through a cloud
service (for example, scheduling based
on Web calendars or booking systems).
Additionally, it is feasible to process
information from the Internet, such as
weather data, in order to perform
forecast-based control. Last but not
least, the JavaScript kernel also makes
it possible to build serial protocols to non-standard equipment in primary plant control.

KIOT-CN

Specification

Processor64-bit 1.5GHz Quad-core Processor
RAM2GB
Power InputUSB-C 5V/3A
Dimension102.568.638.4 mm
NetworkingGigabit Ethernet RJ45 connector.
USBUSB 2.0 Type A × 2, USB 3.0 Type A × 2
Interface1*Ethernet (100Base-T), Web Services (OPC XML-DA/UA, BACNET IP, MODBUS TCP, HTTP, HTTPS, FTP, SSH, VNC, SNMP, BLE 5.0, ZIGBEE 3.0. 2.4G/5G Dual-Band WIFI
RTCReal-time clock with battery socket
Fan Headerallows speed adjustment, 5V
IndicatorPower indicator × 1, PCB status indicator × RS485 communication indicator × 8
Temperature0 – 40 C
Humidity10-90% relative, non condensing

The post KIOT-CN appeared first on Kepler Electronics.

]]> L-DALI: BACnet/DALI Controllers https://kepler-elec.com/2024/04/02/l-dali-bacnet-dali-controllers/ https://kepler-elec.com/2024/04/02/l-dali-bacnet-dali-controllers/#respond Tue, 02 Apr 2024 15:12:21 +0000 https://kepler-elec.com/?p=4096 L‑DALI Controllers are multifunctional devices combining constant light control, sunblind control and gateway functions between DALI (Digital Addressable Lighting Interface) and BACnet or Modbus systems.

The post L-DALI: BACnet/DALI Controllers appeared first on Kepler Electronics.

]]>

L-DALI:ME201-U BACnet/DALI Controllers
L-DALI:-ME201-U BACnet/DALI Controllers
LDALI-ME202-U BACnet/DALI Controller
LDALI-ME202-U BACnet/DALI Controller
LDALI-ME204-U BACnet/DALI Controller
LDALI-ME204-U BACnet/DALI Controller

L‑DALI Controllers are multifunctional devices combining constant light control, sunblind control and gateway functions between DALI (Digital Addressable Lighting Interface) and BACnet or Modbus systems. With Alarming, Scheduling, Trending and e-mail notification (AST™) the L‑DALI Controller is a perfect solution for DALI lighting systems and for a smooth DALI integration into BACnet or Modbus networks.

DALI Network Interface

L-DALI Controllers act as a DALI-Master in the DALI network which can interact with DALI-2 multi-sensors and buttons in Multi-Master mode. The L-DALI Controllers feature 1, 2, or 4 independent DALI channels. Up to 64 DALI or DALI-2 based luminaries per DALI channel can be controlled individually or via 16 groups. All luminaries are monitored for lamp or ballast defect. In addition up to 64 DALI-2 input devices are supported per DALI channel. Each input device can be equipped with push buttons, sliders, occupancy and light sensors.

Built-In DALI Power Supply

All L-DALI models come with a built-in DALI bus power supply. The LDALI-ME201-U/LDALI-ME202-U can supply its DALI channel with a guaranteed supply current of 230 mA, the LDALI-ME204-U can supply 116 mA per channel. In case of the LDALI-ME204-U an external DALI bus power supply can be added to top up the supply current to 232 mA. External power supplies are available for up to four DALI channels. The internal DALI bus power can be switched on and off via web interface or LCD UI. Thanks to the switching power supply, these devices can handle input voltages from 85 – 240 V AC, 50/60 Hz.

BACnet Connectivity

The L‑DALI Controllers feature connectivity in BACnet networks via BACnet/IP, BACnet/SC or BACnet MS/TP. They also provide data exchange through Global Connections and support comprehensive AST™ functionality (Alarming, Scheduling, and Trending). Full L‑WEB integration is supported as well. The L‑DALI Controllers are equipped with two Ethernet ports including a built-in Ethernet switch.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment.

Local Operation and Override

The L‑DALI Controllers come with a built-in backlit display (128×64) and a jog dial for local operation and override. Using the local operation, maintenance tasks (DALI device replacement, burn-in mode, etc.) can be executed without the need of any software tool.

Constant Light Control

The integrated Constant Light Controller works with DALI and with BACnet devices. It supports various lighting control strategies, presence and lux level based. Several parameters can be used to configure the Constant Light Controller for almost any use case.

Sunblind Control with Constant Light Control Interaction

The integrated Sunblind Controller application allows intelligent controlling of blinds connected via SMI (requires LSMI-804). It offers effective sun and anti-glare protection through active slat control and slat adjustment according to the sun position. Energy efficiency is ensured by linking room occupancy with sun protection. If a room is unoccupied, the L‑DALI Controller opens or closes the sunblinds depending on the thermal requirements. This allows for instance to use the heat of the sun for heating in winter while in summer, the heat from the sun is reduced by the closed blinds to reduce the cooling load.

Optionally, the sunblind and light control applications of a room or an area can be linked together. As both applications control the light available in the room this holistic approach assures maximum comfort and energy efficiency.

In addition to the constant light and sunblind control, any mathematical calculation and function or logical operation (Boolean algebra) can be created on the device and process all available data points.

Device Configuration via Tool or Web Interface

The device configuration, commissioning, and parameterization is done either with the configuration tool software or via the integrated web server.

EnOcean, OPC and Modbus

EnOcean sensors and buttons can be integrated via the optional L‑ENO EnOcean interface. To use the L‑DALI with an existing SCADA solution all run-time values and parameters can be accessed via BACnet, OPC (XML/DA and UA) and Modbus TCP. 5, 10 or 15 devices can be connected via Modbus RTU (RS-485), the actual number of supported devices is dependent on the activated licenses (LIC-MOD5, LIC-MOD10 or both).

Advanced DALI Functions

  • DALI Sensors
    The L-DALI Controllers support the integration of DALI-2 multi-sensors for presence detection and light level recognition. In addition to the LOYTEC multi-sensors LDALI-MS2-BT/MS3-BT/MS4-BT, DALI-2 sensors of many well-known manufacturers can be used. For asset tracking in office buildings with the LOYTEC multi-sensors (LDALI-MSx-BT), a LIC-ASSET license is required.
  • DALI Buttons
    For manual operation, DALI-2 push button couplers, like the LDALI-BM2, DALI-2 operation panels and IR remote controls can be integrated into the system. Their functionality can be configured individually. In addition to controlling lighting via DALI (dimming, scene recall, etc.) and sunblinds via SMI (up, down, etc.), button press events can be propagated in the building network, triggering other, non-lighting related building automation functions.
  • DALI Relay Modules
    Standard loads in the power grid can be controlled via DALI using DALI relay modules, like the LDALI-RM5 / LDALI-RM6 /LDALI-RM8.
  • DALI Color Control
    The L-DALI allows controlling DALI luminaires with color control functionality (DT8). Both, tunable white (Tc) and full RGB color control (RGBWAF and xycoordinate) are supported. Light color can either be changed automatically, via manual operation (e.g. buttons) or via the network.
  • Auto Burn-In for Fluorescent Lamps
    Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by L‑DALI for each lamp. After 100 hours burn-in time, the lamp’s constant light control is enabled.
  • Automatic Test of Emergency Lighting Systems
    IIn DALI emergency lighting systems based on IEC 62386-202, L-DALI can be used for testing the sys-tem. The results can be logged.
  • Collection of Important Operational Parameters
    For maximum transparency in the lighting system, L‑DALI can record the operating hours of each lamp and also the energy consumption (calculated).
  • DALI Device Replacement made Easy
    Defective DALI ballasts can easily be replaced directly on the L‑DALI Controller (LCD and jog dial) or via the web interface. No software tool is necessary.
ldali bacnet website 01

Smooth DALI integration into BACnet and Modbus Networks

The L‑DALI Controller maps information from the DALI network to BACnet objects or Modbus registers that are used to control DALI ballasts or to display operating states.

BACnet Interface

The following BACnet server objects are supported:

  • Analog Output objects to control DALI ballasts, groups, and channels
  • Multi-State Output objects for scene control of DALI groups and channels Analog Input objects providing feedback from DALI ballast, groups, and channels
  • Analog Input objects providing status information from DALI groups and channels
  • Accumulator objects providing estimated energy usage of DALI groups and channels
  • Multi-State Output objects to issue commands (start/stop emergency test or burn-in, change color temperature, etc.) to DALI ballasts, groups and channels
  • Analog Input objects providing battery status of emergency ballasts, groups
  • Analog Input objects providing lux level information from supported DALI sensors
    (LDALI-MS2: additionally humidity and temperature information is provided)
  • Binary Input objects providing occupancy information from supported DALI sensors
  • Loop objects providing constant light controller functionality
  • Binary Input objects providing button information from supported DALI buttons
  • Various objects to control sunblinds

All data points are available on the web server in a tree structure and can be displayed and set via a web browser.

ldali room new2019
ldali BACNET plus pwr4 U lsmi804 leno rm3 bm2 01

Features

  • DALI integration into BACnet networks
  • Supports up to 64 DALI ballasts and 16 DALI groups per DALI channel
  • Supports up to 64 input devices overall per channel
  • Up to 16 DALI sensors per DALI channel are supported
  • Up to 64 DALI button modules per DALI channel are supported
  • Integrated DALI bus power supply
  • Manual operation using the jog dial and local access to information about device status and data points in clear text and symbols
  • 128×64 graphic display with backlight
  • Built-in web server for device configuration
  • Test and assignment of DALI devices on the web interface
  • Replacement of DALI devices without additional software tools via LCD and jog dial
  • Supports the control of standard loads in the power grid via LDALI-RM3 Relay Modules
  • Integrated Constant Light Controller
  • Integrated Sunblind Controller
  • Supports DALI-2 devices (drivers and input devices)
  • DALI-2 certified (compliant with IEC 62386-101 and IEC 62386-103)
  • Support DALI color control (DT8 tunable white & full color control)
  • Supports lamp burn-in mode
  • Supports periodic testing of DALI emergency lights
  • Integrated DALI Protocol Analyzer
  • Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • B-BC (BACnet Building Controller) functionality, BTL certified
  • Alarming, Scheduling, and Trending (AST™) locally or embedded in L‑WEB (building management)
  • Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
  • Event-driven e-mail notification
  • Supports Local and Global Connections
  • Stores customized graphical pages
  • Visualization of customized graphical pages through LWEB‑900 (building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Stores user-defined project documentation
  • Dual Ethernet/IP interface
  • Built-in OPC XML‑DA and OPC UA server
  • Modbus TCP or Modbus RTU/ASCII (Master or Slave)
  • Supports SMI (Standard Motor Interface) through LSMI-804
  • Connection to EnOcean wireless devices via LENO‑80x Interface
  • Supports WLAN through LWLAN‑800 Interface
  • Supports LTE through LTE‑800 Interface
  • Modbus RTU/ASCII for 5 devices (LIC-MOD5 required), 10 devices (LIC-MOD10 required) or 15 devices (LIC-MOD5 and LIC-MOD10 required)
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution

Tutorials

L-DALI 7.4 Release Tutorial – Features of the new DALI Release

This video provides a detailed overview on the new features of the latest firmware release.

Features of L-INX 8.0 Release 

This video presents some features of the newfirmware release.

L-DALI: BACnet/DALI Controllers Products

LDALI-ME201-U

LDALI-ME201-U

BACnet/DALI Controller, 1 DALI channel, integrated DALI power supply

LDALI-ME202-U

LDALI-ME202-U

BACnet/DALI Controller, 2 DALI channel, integrated DALI power supply

LDALI-ME204-U

LDALI-ME204-U

BACnet/DALI Controller, 4 DALI channels, integrated DALI power supply

LIC-ASSET

LIC-ASSET

LIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)

LIC-MOD5

LIC-MOD5

License to add 5 Modbus devices for LDALI-ME201-U, LDALI-ME202-U, LDALI-ME204-U

LIC-MOD10

LIC-MOD10

License to add 10 Modbus devices for LDALI-ME201-U, LDALI-ME202-U, LDALI-ME204-U

LDALI-PWR1-U

LDALI-PWR1-U

DALI Power Supply for 1 DALI channel, 50mA

LDALI-PWR2-U

LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

LDALI-PWR4-U

LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

LDALI-MS2-BT

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LDALI-PD1

LDALI-PD1

DALI Phase-Cut Dimmer Module

L-RC1

L-RC1

Infrared remote control for room automation applications

LDALI-BM2

LDALI-BM2

Quadruple DALI pushbutton coupler

LDALI-RM5

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

LDALI-RM8

LDALI-RM8

DALI Relay Modul, 8 channel

LSMI-804

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LWLAN-800

LWLAN-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LTE-800

LTE-800

LTE Interface

LRS232-802

LRS232-802

USB to 2x RS-232 Interface

LDALI-PWM4

LDALI-PWM4 PWM

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext

LDALI-PWM4-RGBW

LDALI-PWM4 PWM

PWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

LDALI-PWM4 PWM

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

The post L-DALI: BACnet/DALI Controllers appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/04/02/l-dali-bacnet-dali-controllers/feed/ 0 LDALI‑PLC2 LDALI‑PLC4: Programmable DALI Controller https://kepler-elec.com/2024/03/29/ldaliplc2-ldaliplc4-programmable-dali-controller/ https://kepler-elec.com/2024/03/29/ldaliplc2-ldaliplc4-programmable-dali-controller/#respond Fri, 29 Mar 2024 09:15:08 +0000 https://kepler-elec.com/?p=3983 The LDALI‑PLC2/PLC4 controllers are powerful, programmable lighting controllers, which can be programmed by L‑STUDIO.

The post LDALI‑PLC2 LDALI‑PLC4: Programmable DALI Controller appeared first on Kepler Electronics.

]]>
LDALI‑PLC2 / LDALI‑PLC4: Programmable DALI Controller

The LDALI‑PLC2/PLC4 controllers are powerful, programmable lighting controllers, which can be programmed by L‑STUDIO. With Alarming, Scheduling, Trending and e‑mail notification (AST™) the LDALI‑PLC2/PLC4 controller is a perfect solution for DALI lighting systems with application requirements not covered by the standard application of the non‑programmable L‑DALI controllers.

DALI Network Interface

L‑DALI Controllers act as a DALI‑Master in the DALI network and can interact withDALI‑2 multi‑sensors and buttons in Multi‑Master mode. The LDALI‑PLC2/PLC4 is equipped with 2/4 independent DALI channels. Up to 64 DALI or DALI‑2 basedluminaries per DALI channel can be controlled individually or via 16 groups. Allluminaries are monitored for lamp or ballast defect. In addition up to 64 DALI‑2input devices are supported per DALI channel. Each input device can be equipped with push buttons, sliders, occupancy and light sensors.

Built-In DALI Bus Power Supply

The LDALI‑PLC4 comes with a built‑in DALI bus power supply, which can supply each DALI channel with a guaranteed supply current of 116 mA. An external DALI bus power supply can be added to top up the supply current to 232 mA. External power supplies are available for up to four DALI channels. The LDALI‑PLC2 pro‑vides a DALI‑bus power supply with guaranteed supply current of 230mA per channel. The internal DALI bus power can be switched on and off via web interface or LCD UI. Thanks to the switching power supply, these devices can handle input voltages from 85 – 240 V AC, 50/60 Hz.

Local Operation and Override

The L‑DALI Controllers come with a built‑in backlit display (128×64) and a jog dial for local operation and override. Using the local operation, maintenance tasks (DALI device replacement, burn‑in mode, etc.) can be executed without the need of any software tool.

Programmable

The LDALI‑PLC2/PLC4 can be programmed using the L‑STUDIO programming tool. It can be programmed using IEC 61499 for integration into the L‑ROC system and IEC 61131 for stand-alone operation.

IEC 61131 lighting control library available

A library containing standard lighting control functionality is available. It supports various lighting control strategies, presence and lux level based. Several parame‑ters can be used to configure the application for almost any use case. User specific program extensions are possible as well.

Connectivity

The LDALI‑PLC2/PLC4 controller provides connectivity functions to concurrently integrate CEA‑709 (LonMark Systems), BACnet, KNX, and Modbus subsystems. LonMark Systems can be integrated via IP‑852 (Ethernet/IP). BACnet integration is supported through BACnet/IP (Ethernet/IP), BACnet/SC or BACnet MS/TP (RS‑485), KNXnet/IP and Modbus TCP via Ethernet/IP.

The gateway functionality allows data communication between all communication technologies available on the device. Different technology data points are mapped through Local Connections on the device. The mapping of different technology data points on distributed devices is supported by Global Connections.

Each L-DALI Controller is equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/IP, LON/IP, or Modbus TCP are present. These devices also feature firewall functionality to isolate particular protocols or services between the ports.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The L-DALI Controllers provide fully featured AST™ functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L‑WEB System.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment.

Device Configuration via Tool or Web Interface

The device configuration, commissioning, and parameterization is done either with the configuration tool software or via the integrated web server.

EnOcean, SMI and LIOB/‌IP

Wireless EnOcean sensors and buttons can be integrated via the optional L‑ENO EnOcean interface. For sunblinds the LSMI-804 extension module allows the integration of up to four SMI channels. Physical I/Os can be integrated through L‑IOB I/O Modules via LIOB‑IP.

L-DALI LON

Advanced DALI Functions

  • DALI Sensors
    The L-DALI Controllers support the integration of DALI-2 multi-sensors for presence detection and light level recognition. In addition to the LOYTEC multi-sensors LDALI‑MS2-BT/MS3‑BT/MS4‑BT, DALI-2 sensors of many well-known manufacturers can be used.
  • DALI Buttons
    For manual operation, DALI-2 push button couplers, like the LDALI-BM2, DALI-2 operation panels, and IR remote controls can be integrated into the system. The function executed when a button is pressed is freely programmable in the program logic. In addition the feedback feature for pushbutton instances according to IEC 62386‑332 is supported.
  • DALI Relay Modules
    Standard loads in the power grid can be controlled via DALI using DALI relay modules, like the LDALI-RM5, LDALI-RM6 and LDALI-RM8.
  • DALI Color Control
    The LDALI allow controlling DALI luminaires with color control functionality (DT8). Both, tunable white (Tc) and full RGB color control (RGBWAF and xy-coordinate) are supported. Changing the light colour is possible via scenes or controlled via the program logic.
  • Auto Burn-In for fluorescent Lamps
    Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by L‑DALI for each lamp. After 100 hours burn-in time, the lamp’s constant light control is enabled.
  • Automatic Test of Emergency Lighting Systems
    In DALI emergency lighting systems based on IEC 62386-202, L-DALI can be used for testing the system. The results can be logged.
  • Collection of important operational Parameters
    For maximum transparency in the lighting system, L‑DALI can record the operating hours of each lamp and also the energy consumption (calculated).
  • DALI Device Replacement made easy
    Defective DALI ballasts can easily be replaced directly on the L‑DALI Controller (LCD and jog dial) or via the web interface. No software tool is necessary.
ldali PLC4 plus pwr4 U lsmi804 leno rm3 bm2 01

Features

  • Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
  • Supports up to 64 DALI ballasts and 16 DALI groups per DALI channel
  • Supports up to 64 input devices overall per channel
  • Up to 16 DALI sensors per DALI channel are supported
  • Up to 64 DALI button modules per DALI channel are supported
  • Integrated DALI bus power supply
  • DALI‑2 certified
  • Manual operation using the jog dial and local access to information about device status and data points in clear text and symbols
  • 128×64 graphic display with backlight
  • Built‑in web server for device configuration
  • Test and assignment of DALI devices on the web interface
  • Replacement of DALI devices without additional software tools via LCD and jog dial
  • Supports the control of standard loads in the power grid via LDALI‑RM5/RM6/RM8 Relay Modules
  • Supports DALI‑2 devices (drivers and input devices)
  • Support DALI color control (DT8 tunable white & full color control)
  • Supports lamp burn‑in mode
  • Supports periodic testing of DALI emergency lights
  • Integrated DALI Protocol Analyzer
  • Physical inputs and outputs with L‑IOB I/O Modules
  • Compliant with CEA‑709, CEA‑852, and ISO/IEC 14908 Standard (LonMark System)
  • Support of dynamically created or static NVs
  • Support of user‑defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • KNXnet/IP
  • Gateway functions including Smart Auto‑Connect™
  • Modbus TCP and Modbus RTU/ASCII
  • Compliant with ANSI/ASHRAE135‑2012 and ISO16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • B‑BC (BACnet Building Controller) functionality, BTL certified
  • Alarming, Scheduling, and Trending (AST™) locally or embedded in L‑WEB (building management)
  • Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
  • Event‑driven e‑mail notification
  • Supports Local and Global Connections
  • Built‑in OPCXML‑DA and OPCUA server
  • Stores customized graphical pages
  • Visualization of customized graphical pages through LWEB‑900 (building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Stores user‑defined project documentation
  • Dual Ethernet/IP interface
  • Supports SMI (Standard Motor Interface) through LSMI‑804
  • Connection to EnOcean wireless devices via LENO‑80x Interface
  • Supports WLAN through LWLAN‑800 Interface
  • Supports LTE through LTE‑800 Interface
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution

Tutorials

Light Library Tutorial

The video shows basic steps on how to create a light application with the LDALI-PLC2/PLC4 in L-STUDIO.

L-DALI 7.4 Release Tutorial – Features of the new DALI Release

This video provides a detailed overview on the new features of the latest firmware release.

Features of L-INX 8.0 Release

This video presents some features of the new firmware release.

LDALI‑PLC2 / LDALI‑PLC4: Programmable DALI Controller Products

LDALI-PLC2

LDALI‑PLC2

Programmable DALI Controller, 2 DALI channels, integrated DALI power supply

LDALI-PLC4

LDALI-PLC4

Programmable DALI Controller, 4 DALI channels, integrated DALI power supply

L-STUDIO

L-STUDIO

Device configuration and programming suite

LIC-ASSET

LIC-ASSET

LIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)

LOY-DALI-SBM1

LOY-DALI-SBM1 Sunblind Module

LOY-DALI-SBM1 Sunblind Module

LDALI-PWR1-U

LDALI-PWR1-U

DALI Power Supply for 1 DALI channel, 50mA

LDALI-PWR2-U

LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

LDALI-PWR4-U

LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

LDALI-MS2-BT

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LDALI-BM2

LDALI-BM2

Quadruple DALI pushbutton coupler

LDALI-RM5

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

LDALI-RM8

LDALI-RM8

DALI Relay Modul, 8 channel

LDALI-PD1

LDALI-PD1

DALI Phase-Cut Dimmer Module

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LRS232-802

LRS232-802

USB to 2x RS-232 Interface

LSTAT-810-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Europe, White

LSTAT-820-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, USA/CA, White

LSTAT-830-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Japan, White

LSMI-804

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LTE-800

LTE-800

LTE Interface

L-RC1

L-RC1 Infrared Remote Control

Infrared remote control for room automation applications

LDALI-PWM4

LDALI-PWM4 PWM

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

LDALI-PWM4 PWM

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-RGBW

LDALI-PWM4 PWM

LSTAT-810-GX-LX-CU

LSTAT-810-GX-LX-CU

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-812

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LDALI‑PLC2 LDALI‑PLC4: Programmable DALI Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/03/29/ldaliplc2-ldaliplc4-programmable-dali-controller/feed/ 0 LIOB-594 I/O Controller https://kepler-elec.com/2024/03/28/liob-594-i-o-controller/ https://kepler-elec.com/2024/03/28/liob-594-i-o-controller/#respond Wed, 27 Mar 2024 20:50:28 +0000 https://kepler-elec.com/?p=3867 LIOB-594 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

The post LIOB-594 I/O Controller appeared first on Kepler Electronics.

]]>

LIOB-594 I/O Controller

LIOB-594 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑594 I/ O Controllers are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST™ functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/ O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, telemetry using MQTT, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/ O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

  • Automation station with physical inputs and outputs
  • Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
  • Room controller for up to 2 room segments
  • 128×64 graphic display with backlight
  • Local and remote access to information about device status and data points
  • Manual operation using the jog dial or VNC client
  • Alarming, Scheduling, and Trending (AST™)
  • Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment,…)
  • Event-driven e-mail and SMS (requires LTE-800) notification
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • BACnet Client Configuration with configuration tool (scan and EDE import)
  • B-BC (BACnet Building Controller) functionality, BTL certified
  • Compliant with CEA‑709, CEA‑852, and ISO/ IEC 14908 Standard (LonMark System)
  • Supports IP-852 (Ethernet/ IP)
  • Support of dynamically created or static NVs
  • Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • Math objects to execute mathematical operations on data points
  • Stores customized graphic pages
  • Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Support of the L‑STAT Room Operator Panel
  • Built-in OPC XML‑DA and OPC UA server
  • Dual Ethernet/ IP interface
  • Access to network statistics
  • Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
    Router including BBMD as well as Slave-Proxy functionality
  • Gateway functions including Smart Auto-Connect™
  • Integrated web server for device configuration and monitoring data points
  • Stores user-defined project documentation
  • Connection to EnOcean wireless devices via LENO-80x Interface
  • Supports WLAN through LWLAN-800 Interface
  • Supports LTE through LTE‑800 Interface
  • Integration of damper actuator via MP-Bus
  • Support VPN

*requires L-IOT1 software license

LIOB-594 I/O Controller Products

LIOB-594

LIOB-594 I/O Controller

L-IOB I/O Controller: 8x Universal I/O (IO), 7x Digital Output (DO) (5x Relay 2A, 2x Relay 6A)

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

L-ACT Actuators

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

L-ACT Actuators

Actuator 3/4‘‘, 5Nm, MP-Bus cable

LPOW-2415B

l-pow-2415b

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE-800

LTE Interface

LOYREL-816

LOYREL-816 Relay Interface

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

L-TRIAC16 TRIAC

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LSTAT-810-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-594 I/O Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/03/28/liob-594-i-o-controller/feed/ 0 LIOB-593 I/O Controller https://kepler-elec.com/2024/03/28/liob-593-i-o-controller/ https://kepler-elec.com/2024/03/28/liob-593-i-o-controller/#respond Wed, 27 Mar 2024 20:49:13 +0000 https://kepler-elec.com/?p=3864 LIOB-593 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

The post LIOB-593 I/O Controller appeared first on Kepler Electronics.

]]>

LIOB-593 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

Communication

LIOB‑593 I/O Controllers are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST™ functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/803, and can be seamlessly integrated in the LWEB‑900 Building Management System. The L‑IOB I/O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, telemetry using MQTT, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/‌O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

  • Automation station with physical inputs and outputs
  • Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
  • Room controller for up to 2 room segments
  • 128×64 graphic display with backlight
  • Local and remote access to information about device status and data points
  • Manual operation using the jog dial or VNC client
  • Alarming, Scheduling, and Trending (AST™)
  • Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment,…)
  • Event-driven e-mail and SMS (requires LTE-800) notification
  • Math objects to execute mathematical operations on data points
  • Stores customized graphic pages
  • Visualization of customized graphic pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Support of the L‑STAT Room Operator Panel
  • Built-in OPC XML‑DA and OPC UA server
  • Dual Ethernet/‌IP interface
  • Access to network statistics
  • Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • BACnet Client Configuration with configuration tool (scan and EDE import)
  • B-BC (BACnet Building Controller) functionality, BTL certified
  • Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
  • Supports IP-852 (Ethernet/ IP)
  • Support of dynamically created or static NVs
  • Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP Router including BBMD as well as Slave-Proxy functionality
  • Alarming, Scheduling, and Trending (AST™)
  • Gateway functions including Smart Auto-Connect™
  • Integrated web server for device configuration and monitoring data points
  • Stores user-defined project documentation
  • Connection to EnOcean wireless devices via LENO-80x Interface
  • Supports WLAN through LWLAN-800 Interface
  • Supports LTE through LTE‑800 Interface
  • Integration of damper actuator via MP-Bus
  • 8 x Universal I/O (U, I, R), 8 x Universal I/O (U)**
  • Supports VPN

*requires L-IOT1 software license
**U: 0‑10V input or 0‑10V output, I: 4‑20 mA input, R: resistance measurement

LIOB-593 I/O Controller Products

LIOB-593

LIOB-593

L-IOB I/O Controller: 8 x Universal I/O (U, I, R), 8 x Universal I/O (U), 7x Digital Output (DO) (5x Relay 2A, 2x Relay 6A)

L-IOT1

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

L-STUDIO

Device configuration and programming suite

L-ACT101-MP

L-ACT Actuators

Actuator 5/8‘‘, 5Nm, MP-Bus cable

L-ACT102-MP

L-ACT Actuators

Actuator 3/4‘‘, 5Nm, MP-Bus cable

LPOW-2415B

l-pow-2415b

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE-800

LTE Interface

LOYCNV-VA8

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LOYREL-816

LOYREL-816 Relay Interface

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

L-TRIAC16 TRIAC

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LSTAT-810-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

The post LIOB-593 I/O Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/03/28/liob-593-i-o-controller/feed/ 0 LIOB-592 I/O Controller https://kepler-elec.com/2024/03/28/liob-592-i-o-controller/ https://kepler-elec.com/2024/03/28/liob-592-i-o-controller/#respond Wed, 27 Mar 2024 20:48:41 +0000 https://kepler-elec.com/?p=3860 LIOB-592 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

The post LIOB-592 I/O Controller appeared first on Kepler Electronics.

]]>

LIOB-592 I/O Controller

LIOB-592 I/O Controllers are IP-enabled, compact, programmable BACnet Building Controller (B-BC) with physical inputs and outputs and integrated graphical visualization.

BACnet/IP over Ethernet

The LIOB‑592 I/O Controllers are equipped with two Ethernet ports, including a built-in Ethernet switch. This allows for building a daisy-chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Technology data points are automatically exposed as OPC tags for higher level OPC client applications or L‑WEB system via the integrated OPC server providing SSL encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The L‑IOB I/ O Controllers further allow data exchange over global connections (network-wide data exchange), offer AST™ functions (Alarming, Scheduling, and Trending), store custom graphic pages for visualization in LWEB‑802/ 803, and can be seamlessly integrated in the LWEB‑900 Building Management System. LIOB‑592 I/ O Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, telemetry using MQTT, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

Local Operation and Override

All L‑IOB I/ O Controllers are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation and override. Device and data point information is displayed in text form and via graphical symbols.

Features

  • Automation station with bidirectional I/Os configurable as either input or output
  • Programmable with L-STUDIO (IEC 61131‑3 or IEC 61499)
  • Room controller for up to 2 room segments
  • Node.js support* for easy IoT integration (e.g. Google calendar, MQTT, Alexa & friends, multimedia equipment, …)
  • Dual Ethernet/ IP interface
  • Manual operation using the jog dial or VNC client
  • 128×64 graphic display with backlight
  • Local and remote access to information about device status and data points
  • Stores customized graphic pages
  • Visualization of customized graphic pages through LWEB-900 (Building Management), LWEB-803 (Monitoring and Control), or LWEB-802 (Web Browser)
  • BACnet Client Configuration with configuration tool (scan and EDE import)
  • Supports IP-852 (Ethernet/ IP)
  • Support of dynamically created or static NVs
  • Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
    Router including BBMD as well as Slave-Proxy functionality
  • Alarming, Scheduling, and Trending (AST™)
  • Event-driven e-mail and SMS (requires LTE-800) notification
  • Math objects to execute mathematical operations on data points
  • Integrated web server for device configuration and monitoring data points
  • Gateway functions including Smart Auto-Connect™
  • Access to network statistics
  • Compliant with CEA-709, CEA-852, and ISO/IEC 14908 Standard (LonMark System)
  • Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • B-BC (BACnet Building Controller) functionality, BTL certified
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • Built-in OPC XML‑DA and OPC UA server
  • Connection to EnOcean wireless devices via LENO-80x Interface
  • Supports SMI (Standard Motor Interface) through LSMI-804
  • Supports WLAN through LWLAN-800 Interface
  • Supports MP-Bus through LMPBUS-804
  • Supports LTE through LTE-800 Interface
  • Support of the L-STAT Room Operator Panel
  • Stores user-defined project documentation
  • Supports VPN

*requires L-IOT1 software license

LIOB-592 I/O Controller Products

LIOB-592

LIOB-592 I/O Controller

L-IOB I/O Controller: 40x Universal I/O (12 optionally with 4-20 mA Current Output)

L-IOT1

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

L-STUDIO

Device configuration and programming suite

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE-800

LTE Interface

LMPBUS-804

MP-Bus Interface

MP-Bus Interface for 16 devices per channel, up to 4 channels

LSMI-804

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LRS232-802

LRS232-802

USB to 2x RS-232 Interface

LOYREL-816

LOYREL-816 Relay Interface

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TRIAC16

L-TRIAC16 TRIAC

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LSTAT-810-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

LPOW-2415A

L-POW Power Supply

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

l-pow-2415b

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-592 I/O Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2024/03/28/liob-592-i-o-controller/feed/ 0 LROC-40x Room Controller https://kepler-elec.com/2023/10/09/lroc-40x-room-controller/ https://kepler-elec.com/2023/10/09/lroc-40x-room-controller/#respond Sun, 08 Oct 2023 21:41:18 +0000 https://kepler-elec.com/?p=3227 LROC-40x Room Controller

The post LROC-40x Room Controller appeared first on Kepler Electronics.

]]>
LROC-40x Room Controller
LROC-401 Room Controller
LROC-402 Room Controller

The L‑ROC Room Controller provides the basis for a revolutionary room automation system based on IP, which seamlessly integrates with native BACnet/IP networks and LonMark Systems at the controller level. Together with the L‑STUDIO software, flexible room solutions can be created and adapted to changing requirements during the project with little effort. Integral parts of the L‑ROC System are a web-based room operation via an LWEB‑802/803 dashboard and the automatic generation of graphics for the L‑VIS Touch Panel for local operation.

Our room controllers provide all common interfaces and a large number of physical I/Os for room automation projects. KNX devices are integrated via the built-in KNX TP1 or the KNXnet/IP interface. DALI lamps and DALI sensors are connected to the DALI interface with an integrated DALI power supply. Up to 16 SMI sunblind motors connect to the SMI interface. Belimo valves connect to the MP-Bus interface. BACnet MS/TP devices connect to the RS‑485 interface, which can also be configured as a Modbus RTU/ASCII interface to connect Modbus devices like energy meters or ekey finger scanner for access control. L-STAT room operator panels connect to the dedicated L-STAT interface. The EXT interface can connect 16 more SMI sunblind motors through the LSMI-800 interface or M‑Bus meters through the L-MBUS20 interface. EnOcean devices connect to the EnOcean interface through an external antenna. Dual Ethernet ports allow daisy chaining of L‑ROC controllers in a ring topology and provide BACnet/IP, LON/IP, Modbus/IP, KNXnet/IP and OPC communication. Optionally the L‑ROC can communicate via wireless LAN through the LWLAN‑800 wireless adapter connected to the USB port. 24 relay outputs, 8 TRIAC outputs, 8 analog outputs, 10 universal inputs and 2 digital inputs connect various physical inputs and outputs. Our room automation library provides pre-built function modules for all lighting, heating, cooling, ventilation, sunblinds and access control via finger scanners. Built-in SSL encryption ensures secure operation of the room automation system.

Flexible Room Concept for Room Automation

A room segment is the base unit of configuration in the L-ROC System. The L-ROC Room Controller provides a set of functions for every window axis including:

  • Lighting control with constant light controller
  • Sun blind control with sun tracking and year shade progression
  • Temperature control for heating, cooling, and ventilation
  • Occupancy detection
  • Window monitoring and window contact

Depending on the model an L‑ROC Room Controller can control between 8 and 16 room segments. Based on the various room segment types, larger buildings can be modeled in a hierarchical manner. Areas are built with an area manager by combining multiple room controllers. A floor manager manages multiple areas in one floor. Depending on the architecture, the building can be split up into areas and floors as needed.

Area/Floor Managers are responsible for handling functions needed for corridor, staircase, and bathroom lighting, or even ventilation. Floor managers facilitate the data communication between the floors and handle floor relevant functions e.g. processing meter data.

Rooms can be created in any size by moving, installing, or removing partition walls. The resulting logical connections between the L‑ROC Room Controllers will be built automatically. All graphical user interfaces and network connections are automatically generated and adapted respectively.

l-roc_nomenklatur

AST™ for Every Room Segment

L‑ROC provides a set of functions for Alarming, Scheduling, and Trending (AST™) for every room segment. Each room segment can be operated entirely independently. The AST™ functions are fully available to higher-level systems through BACnet/IP and web services (L‑WEB System). Distributed schedulers can be efficiently managed and changed with LWEB‑900.

Room Communication through redundant or seperated IP Network

L‑ROC Room Controllers are interconnected via a 100Base-T Ethernet network. Each L‑ROC device is equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/ IP, LON/ IP, or Modbus TCP are present. These devices also feature firewall functionality of course to isolate particular protocols or services between the ports. The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Using the internal switch, a daisy chained line topology of up to 20 devices can be  built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

Integrated L-WEB Room Operation

L‑ROC controllers provide graphical user interfaces for room operation directly via an IP connection to the user, without the need for an additional web server. Graphic projects are distributed among the L‑ROC Room Controllers and can be accessed by LWEB‑802/803 from any PC workstation, smart phone, or tablet PC running Android or iOS.

Integration of the L-STAT Room Operator Panel

Depending on the model, 8 to 16 L-STAT Room Operator Panels can be integrated via the L-STAT interface per L‑ROC Room Controller. In addition to the attractive, modern design and intuitive operation, L-STAT provides a range of features to individually increase the room comfort.

Internal sensors measure temperature, humidity, dew point, occupancy, and the CO2 content of the air. There is also the possibility to control room functions via an IR remote control. Standard pushbuttons and external temperature sensors can be integrated through additional inputs. 

Connection to Higher-Level Systems

Higher-level systems can seamlessly integrate L‑ROC Room Controllers via BACnet/IP, LonMark IP‑852, or web services (OPC).

All these protocols are simultaneously available. It is possible to integrate the L‑ROC Room Controller in a BACnet Operator Workstation and at the same time L‑ROC will communicate with other CEA‑709 devices on the IP‑852 channel. Moreover, a higher-level SCADA or ERP System (Facility Management) gets information directly from the L‑ROC Room Controller by using web services based on OPC XML‑DA or OPC UA.

Full LWEB-900 Support

The L‑WEB System uses web services to communicate with the L‑ROC System. All device and operating parameters of every single L‑ROC Room Controller are automatically synchronized with the LWEB‑900 SQL database. Controllers can be replaced from the database with a backup without user interaction.

I/O Integration via Plug and Play

The L‑ROC Room Controllers can automatically integrate additional physical I/Os by using L‑IOB I/O Modules. Up to 2 L‑IOB I/O Modules can be connected through LIOB‑IP. All I/Os can be used by the L‑ROC application and are also available via the web interface of L‑ROC. All configurations of the L‑IOB Modules are stored on the L‑ROC and loaded on demand into the L‑IOB I/O Modules. Exchanging I/O modules is done without any configuration effort requiring only a few quick configuration steps.

Year Shade Progression

Especially in dense city areas, buildings can cast shadows on each other. In case a façade element is shaded by another building, sunblinds can be deactivated for better daylight harvesting. The high-performance L-ROC controllers allow to calculate a 3D model in dxf-Format of the building and its close-by neighbors. The model can be constructed using common 3D CAD software or can be derived from a Building Information Model. In case the scenery changes due to new constructions, only the new buildings have to be inserted in the model. The calculation can be done for each window individually or per shadowing zone.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment.

L-STUDIO

L‑STUDIO is the world’s first IEC 61499 based room automation system. Any room function can be realized with L‑STUDIO in a distributed system of L‑ROC devices. We call this new approach in automation “Cloud Control”. In a cloud of L‑ROC devices, all automation functions are mapped automatically o physical hardware. The object-oriented design method allows the efficient reuse of previously implemented functions. In the graphical development environment of L‑STUDIO, areas are created from room segment with just a few mouse clicks. The areas are interconnected to floors and multiple floors form a building. The entire building application is automatically distributed to the L‑ROC Controllers installed in the building.

New functions can be added to the room segment objects after initial configuration. These new functions can be applied individually or to all room segment objects very easily. Comprehensive debugging and watch functions allow for complete building troubleshooting. An extensive library of functions is provided for heating, ventilation, cooling, lighting, sun blind control, and security. With the integrated L‑VIS/‌L‑WEB Configurator, graphical pages for L‑VIS Touch Panels and L‑WEB applications can be customized.

Features

  • Flexible built-in management for room segments
  • Room controller for up to 8 or 16 room segments
  • Networking via redundant IP network
  • Programmable with L‑STUDIO (IEC 61499)
  • Extension with physical inputs and outputs using L‑IOB I/‌O Modules (LIOB‑45x or LIOB‑55x)
  • 128×64 graphic display with backlight for device configuration and maintenance
  • Local display of device and data point information
  • Manual operation using the jog dial or VNC Client
  • Integrated AST™ functions (Alarming, Scheduling, and Trending) for each room segment
  • Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
  • Event-driven e-mail notification
  • Math objects to execute mathematical operations on data points
  • Stores customized graphical pages
  • Visualization of customized graphical pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Support of the L‑STAT Network Thermostat
  • Built-in OPC XML‑DA and OPC UA server
  • Access to network statistics via SNMP
  • Compliant with ANSI/‌ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • BACnet Client Configuration with configuration tool (scan and EDE import)
  • B-BC (BACnet Building Controller) functionality, BTL-certified
  • Integrated BACnet/ IP to BACnet/SC and BACnet MS/TP Router including BBMD as well as Slave-Proxy functionality
  • Compliant with CEA‑709, CEA‑852, and ISO/‌IEC 14908 Standard (LonMark System)
  • CEA‑709 integration via LonMark IP‑852 (Ethernet/‌IP) channel
  • Support of dynamically created or static NVs
  • Support of user-defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • Connection to KNXnet/‌IP and KNX TP1
  • M‑Bus Master according to EN 13757‑3, connection via optional M‑Bus Converter (L‑MBUS20 or L‑MBUS80)
  • Gateway functions including Smart Auto-Connect™
  • Modbus TCP and Modbus RTU/ASCII (Master or Slave)
  • Integrated web server for device configuration and monitoring data points
  • Integration of actuators via MP-Bus
  • DALI Integration of up to 64 DALI lamps (depending on the model)
  • Integrated DALI power supply, 16 V DC, 230 mA guaranteed supply current, 250 mA max. supply current
  • Test and assignment of DALI devices via the Web interface
  • Replacement of DALI devices without additional software tools via the graphic display and jog dial
  • Supports up to 16 DALI sensors
  • Supports up to 64 DALI pushbuttons
  • Supports the control of standard loads in the power grid via LDALI‑RM3 Relay Modules
  • Supports DALI-2 devices (drivers and input devices)
  • DALI-2 certified, compliant with IEC 62386-101 and IEC 62386-103 (only LROC-400, LROC-401)
  • Supports DALI color control (DT8 tunable white & full color control)
  • Integrated Constant Light Controller
  • Supports lamp burn-in mode
  • Supports periodic testing of DALI emergency lights
  • Integrated DALI Protocol Analyzer
  • Connection to EnOcean wireless devices (built-in EnOcean interface with external antenna for Europe, 868 MHz) or via LENO‑80x
  • Supports WLAN through LWLAN‑800 Interface
  • Supports SMI (Standard Motor Interface):
    LROC-400, LROC-401: built-in (expandable via LSMI-80x)
    LROC-402: needs LSMI-804
  • Supports LTE through LTE-800 Interface
  • Stores user-defined project documentation
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution (only LROC-400/LROC-401)

L-ROC Room Automation – Video

LROC-40x Room Controller Products

LROC-400

LROC-400

L-ROC Room Controller for room segment, aisle, floor, building, or campus management

LROC-401

LROC-401 Room Controller

L-ROC Room Controller for room segment, aisle, floor, building, or campus management

LROC-402

LROC-402 Room Controller

L-ROC Room Controller for room segment, aisle, floor, building, or campus management

LROC-SEG8

LROC-SEG8

License to add 8 segments to L-ROC controller

L-STUDIO

L-STUDIO

Device configuration and programming suite

LIC-ASSET

LIC-ASSET

LIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)

LBOX-ROC1

LBOX-ROC1

System Distribution Box for LROC-40x Room Controller, 519 x 280 x 71 (L x W x H in mm)

LBOX-ROC2

LBOX-ROC

System Distribution Box for LROC‑40x Room Controller, 60 W 24 V DC power supply

LOY-DALI-SBM1

LOY-DALI-SBM1 Sunblind Module

LOY-DALI-SBM1 Sunblind Module

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LSTAT-810-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Europe, White

LSTAT-820-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, USA/CA, White

LSTAT-830-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Japan, White

LSTAT-80x-CUSTOM

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LSMI-804

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LSMI-800

L-SMI

Standard Motor Interface for 16 motors via EXT port

LRS232-802

LRS232-802

L-TRIAC16

L-TRIAC16 TRIAC

TRIAC Interface, 16 x Digital Output 0.5 A TRIAC, 16 x Digital Input (0/10 V)

LOYCNV-VA8

LOYCNV-VA8

Voltage / Current Converter, 8 channels, 0-10 V input to 4-20 mA output converter

LOYREL-816

LOYREL-816 Relay Interface

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

L-TEMP2

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LDALI-MS2-BT

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LDALI-BM2

LDALI-BM2

Quadruple DALI pushbutton coupler

LDALI-RM5

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

LDALI-RM8

LDALI-RM8

DALI Relay Modul, 8 channel

LDALI-PD1

LDALI-PD1

DALI Phase-Cut Dimmer Module

LDALI-PWM4

LDALI-PWM4 PWM

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

LDALI-PWM4 PWM

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-RGBW

LDALI-PWM4 PWM

PWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LIOB-450

LIOB-IP852 I/O Modules LonMark

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-451

LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

LIOB-452

LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-453

LIOB-453

LIOB-IP852 I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-454

LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-550

LIOB-BIP I/O Modules BACnet/IP

LIOB-BIP I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-551

LIOB-551

LIOB-BIP I/O Module: 8 UI, 12 DI

LIOB-552

LIOB-552

LIOB-BIP I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-553

liob-553

LIOB-BIP I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-554

liob-554

LIOB-BIP I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-560

LIOB-560 Module BACnet/IP

LIOB-BIP I/O Modul: 20 Universal I/O (IO)

LIOB-562

LIOB-562 Module BACnet/IP

LIOB-BIP I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

The post LROC-40x Room Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2023/10/09/lroc-40x-room-controller/feed/ 0 LIOB-591 Room Controller https://kepler-elec.com/2023/10/09/liob-591-room-controller/ https://kepler-elec.com/2023/10/09/liob-591-room-controller/#respond Sun, 08 Oct 2023 21:28:02 +0000 https://kepler-elec.com/?p=3220 The LIOB‑591 fan coil controller provides the basis for a...

The post LIOB-591 Room Controller appeared first on Kepler Electronics.

]]>
LIOB‑591 Room Controller

The LIOB‑591 fan coil controller provides the basis for a revolutionary room automation system based on IP, which seamlessly integrates with native BACnet/IP networks at the controller level. Together with the L‑STUDIO software, room control solutions can be created with little effort. Integral parts of the room control system are a web‑based room operation via an LWEB‑802/803 dashboard and the automatic generation of graphics for the L‑VIS Touch Panel for local operation. LIOB‑591 Controllers implement the BACnet Building Controller (B-BC) profile and are BTL certified.

Our room controllers provide all common interfaces and a large number of physical I/Os for room automation projects. DALI lamps and DALI sensors are connected to the DALI interface with an integrated DALI power supply. Up to 16 SMI sunblind motors connect to an external SMI interface. Belimo valves connect to the external MP‑Bus interface. BACnet MS/TP devices connect to the RS‑485 interface, which can also be configured as a Modbus RTU interface to connect Modbus devices like energy meters or ekey finger scanners for access control or to connect the L‑STAT Room Control Unit. EnOcean devices connect to the external EnOcean interface. Dual Ethernet ports allow daisy-chaining of LIOB-591 controllers in a ring topology and provide BACnet/IP, Modbus/IP and OPC communication.

Optionally, the LIOB-591 can communicate via wireless LAN through the LWLAN‑800 wireless adapter connected to the USB port. 20 universal I/Os, one 1250 W and three 300 W TRIAC outputs connect various physical input and output devices. Our room automation library provides pre-built function modules for all lighting, heating, cooling, ventilation, sunblinds and access control via finger scanners. Built‑in SSL encryption ensures secure operation of the room automation system.

All typical room functions are supported:

  • Lighting control with constant light controller
  • Sunblind control with angle adjustment and year shade progression
  • Temperature control for heating, cooling, and ventilation
  • Occupancy detection
  • Window monitoring and window contact

Features

  • Room controller for 1 room segment
  • Networking via redundant IP network
  • Programmable with L-STUDIO (IEC 61131-3 or IEC 61499)
  • Extension with physical inputs and outputs using L‑IOB I/O Modules (LIOB‑45x or LIOB‑55x)
  • 128×64 graphic display with backlight for device configuration and maintenance
  • Local display of device and data point information
  • Manual operation using the jog dial or VNC Client
  • Integrated AST™ functions (Alarming, Scheduling, and Trending) for each room segment
  • Node.js support* for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,…)
  • Event-driven e-mail notification
  • Math objects to execute mathematical operations on data points
  • Stores customized graphical pages
  • Visualization of customized graphical pages through LWEB‑900 (Building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Support of the L‑STAT Room Operator Panel
  • Built-in OPC XML‑DA and OPC UA server
  • Access to network statistics via SNMP
  • Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • BACnet Client Configuration with configuration tool (scan and EDE import)
  • B-BC (BACnet Building Controller) functionality, BTL certified
  • Integrated BACnet/ IP to BACnet/SC and BACnet MS/ TP
    Router including BBMD as well as Slave-Proxy functionality
  • Modbus TCP and Modbus RTU/ASCII (Master or Slave)
  • Integrated web server for device configuration and monitoring data points
  • DALI integration of up to 64 DALI lamps
  • Integrated DALI power supply, 16 V DC, 116 mA max. current
  • Integrated 1250 W heater control
  • Integrated dual fan motor control
  • 8 x Universal I/O (U, I, R), 12 x Universal I/O (U)**
  • Integrated heating/cooling valve control
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution

*requires L-IOT1 software license
**U: 0-10V input or 0-10V output, I: 4-20 mA input, R: resistance measurement

LIOB-591 Room Controller Products

LIOB-591

LIOB-591

L-IOB Room Controller, 8x Universal I/O (U, I, R), 12x Universal I/O (U), 1x TRIAC 1250W, 3x TRIAC 300W

L-IOT1

L-IOT1

Add-on Software License to enable IoT functionality on LIOB-585/586/587/588/589, LIOB-590/591/592/593/594/595/596, LIOB-AIR, and LINX-102/103/202/203

L-STUDIO

L-STUDIO

Device configuration and programming suite

LENO-800

LENO-800

EnOcean Interface 868 MHz Europe

LENO-801

LENO-801

EnOcean Interface 902 MHz USA/Canada

LENO-802

LENO-802

EnOcean Interface 928 MHz Japan

LSTAT-810-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Europe, White

LSTAT-820-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, USA/CA, White

LSTAT-830-G3-L0

L-STAT Remote EnOcean Antenna

Remote EnOcean Antenna, Japan, White

LWLAN-800

LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

LTE-800

LTE-800

LTE Interface

LMPBUS-804

MP-Bus Interface

MP-Bus Interface for 16 devices per channel, up to 4 channels

LSMI-804

LSMI-804

Standard Motor Interface for 64 motors, 4 SMI channels via USB

LRS232-802

LRS232-802

USB to 2x RS-232 Interface

L-TEMP2

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

LDALI-MS2-BT

LDALI-MS2-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height

LDALI-MS4-BT

LDALI-MS4-BT

DALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height

LIC-ASSET

LIC-ASSET

LIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)

L-RC1

L-RC1 Infrared Remote Control

Infrared remote control for room automation applications

LOY-DALI-SBM1

LOY-DALI-SBM1 Sunblind Module

LOY-DALI-SBM1 Sunblind Module

LDALI-BM2

LDALI-BM2

Quadruple DALI pushbutton coupler

LDALI-RM5

LDALI-RM5

DALI Relay Module 10 A, Analog Interface 1 – 10 V

LDALI-RM6

LDALI-RM6

DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”

LDALI-RM8

LDALI-RM8

DALI Relay Modul, 8 channel

LDALI-PWM4

LDALI-PWM4 PWM

PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-TC

LDALI-PWM4 PWM

PWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PWM4-RGBW

LDALI-PWM4 PWM

PWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.

LDALI-PD1

LDALI-PD1

DALI Phase-Cut Dimmer Module

LSTAT-810-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-812-GX-LX-CU

LSTAT-80x-CUSTOM

LSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)

LSTAT-80x-CUSTOM

LSTAT-80x-CUSTOM

One-time customization cost for L-STAT custom design, including 2 working samples

LIOB-450

LIOB-IP852 I/O Modules LonMark

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-451

LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

LIOB-452

LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-453

LIOB-453

LIOB-IP852 I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-454

LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-550

LIOB-BIP I/O Modules BACnet/IP

LIOB-BIP I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-551

LIOB-551

LIOB-BIP I/O Module: 8 UI, 12 DI

LIOB-552

LIOB-552

LIOB-BIP I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-553

liob-553

LIOB-BIP I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-554

liob-554

LIOB-BIP I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-560

LIOB-562 Module BACnet/IP

LIOB-BIP I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

The post LIOB-591 Room Controller appeared first on Kepler Electronics.

]]> https://kepler-elec.com/2023/10/09/liob-591-room-controller/feed/ 0