I/O Modules Archives - Kepler Electronics

KMOD-RM32

Maen Sirhan — Wed, 15 May 2024 13:36:01 +0000

Smart 32-Ch Relay Module, Modbus RS485 Interface, With Multiple Isolation Protection Circuits

KMOD-RM32 is an industrial 32-ch relay module controlled via RS485 bus, adopts Modbus RTU protocol, built-in protection circuits such as power supply isolation, magnetically isolation, resettable fuse, and TVS diode, etc, It also comes with an ABS case.

Product Features

Easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipment’s and/or applications with high communication requirements.
Configurable device address (1-255), multi devices can cascaded on RS485 bus
Features flash-on, flash-off function, it is possible to turn on the relay for a while and then close it automatically via the command
Onboard voltage regulator chip, supports 7-36V wide voltage power supply
Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
Onboard unibody magnetically isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, provides over-current/over voltage proof, lightning proof & anti-electrostatic
Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit
Onboard dedicated relay driver chip, with built-in freewheeling diode protection, the driving ability is stronger and more stable
Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection
High quality relay, contact rating: 1QA 250VAC/30VDC Rail-mounted ABS case, easy to install, safe to use
3 LEDs for indicating the MCU status and signal transceiving status

Product Specifications

OPERATING VOLTAGE	7-36V
COMMUNICATION INTERFACE	RS485
BAUDRATE	4800,9600, 19200,38400,57600, 115200, 128000, 256000
DEFAULT COMMUNICATION FORMAT	9600, N, 8, 1
RELAY CHANNELS	32
CONTACT FORM	1NO 1NC
CONTACT RATING	≤1OA 250VAC/30VDC
COMMUNICATION PROTOCOL	Standard Modbus RTU protocol
RS485 ADDRESS	1-255
LED INDICATORS	STA: MCU indicator, keep flashing when the MCU normally working TXD: TX indicator, lights up when sending data RXD: RX indicator, lights up when receiving data

The post KMOD-RM32 appeared first on Kepler Electronics.

LIOB-FT I/O Modules LonMark

Maen Sirhan — Tue, 02 Apr 2024 16:36:48 +0000

The LIOB-15x Modules are LonMark certified and communicate over TP/FT-10 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LIOB-FT Mode

The LIOB-15x Modules can be switched to LIOB-FT mode using manual local operation. In LIOB-FT mode, the LIOB-15x Modules extend L-INX Automation Servers and L-ROC Room Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L-IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

I/O module with physical inputs and outputs
SNVT-based interface for integration on the LonMark TP/FT-10 channel
LonMark certified
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Compliant with CEA‑709 and ISO/IEC 14908-2 standard (LonMark System)
Connected to the L-INX Automation Server or L-ROC Room Controller via LIOB‑FT
Automatic integration into device configurations with L-INX and L-ROC
Easy device replacement without any additional software
LNS plug‑in for the device configuration in the LonMark System

LIOB-FT I/O Modules LonMark Products

LIOB-150

LIOB-FT I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-151

LIOB-FT I/O Module: 8 UI, 12 DI

LIOB-152

LIOB-FT I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-153

LIOB-FT I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-154

LIOB-FT I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-FT I/O Modules LonMark appeared first on Kepler Electronics.

LOYRTU-485 Modbus Remote I/O Communication Module

Maen Sirhan — Tue, 02 Apr 2024 16:15:32 +0000

The LOYRTU-485 is a Modbus remote I/O communication module to remote-control Slim series DI/DO and AI/AO extension units. The RTU-485 is a standard Modbus slave compatible with LOYTEC devices featuring a Modbus Interface supporting Modbus master mode.

The LOYRTU-485 is UL, CE, and FCC certified.

Features

Supports Modbus protocol, slave mode
Connects up to 8 DVP-S series I/O modules
Max. baudrate: 115.2k bpsk

LOYRTU-485 Modbus Remote I/O Communication Module Products

LOYRTU-485

Modbus Remote I/O Communication Module

The post LOYRTU-485 Modbus Remote I/O Communication Module appeared first on Kepler Electronics.

LIOB-562 Module BACnet/IP

Maen Sirhan — Tue, 02 Apr 2024 13:32:18 +0000

The LIOB‑562 Modules communicate over Ethernet/IP in the BACnet/IP and BACnet/SC network. They adhere to the BACnet Building Controller Profile (B-BC) and either expose their I/ O data points through BACnet server objects or actively fetch them from a BACnet server via BACnet client maps.

According to the B-BC profile, the LIOB‑562 Modules support BACnet alarming, scheduling, and trending. They are BTL tested and certified.

Communication

The LIOB‑562 I/ O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy-chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB‑562 Modules are equipped with a web interface to query the device status and display or change each data point of the module. In addition to the BACnet object interface, the I/ O data points are exposed by the integrated OPC server providing TLS encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The local display can be accessed via VNC.

LIOB‑IP Mode

The LIOB‑562 Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑562 Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, and L-IOB I/ O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

All L‑IOB I/O Modules are equipped with an LCD display (128×64) with backlight and jog dial for manual local operation. Device and data point information is displayed in text form and via graphical symbols.

Features

I/O module with physical inputs and outputs
Dual Ethernet/IP interface
BACnet objects for integration in BACnet/IP, BACnet/SC channels
BACnet Client Mappings to access to BACnet/IP, BACnet/SC objects
Manual operation using the jog dial or VNC client
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Integrated web server for device configuration and monitoring data points
Compliant with ANSI/ ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
B-BC (BACnet Building Controller) functionality, BTL certified
Supports BACnet Alarming, Scheduling, and Trending
Connected to the L‑INX Automation Server, L‑ROC Room Controller, and L-IOB I/O Controller
Automatic integration into device configurations with L‑INX, L‑ROC, and L-IOB I/O Controller
Easy device replacement without any additional software
Built-in OPC XML‑DA and OPC UA server
Math objects to execute mathematical operations on data points

LIOB-562 Module BACnet/IP Products

LIOB-562

LIOB-BIP I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

The post LIOB-562 Module BACnet/IP appeared first on Kepler Electronics.

LIOB-560 Module BACnet/IP

Maen Sirhan — Tue, 02 Apr 2024 13:31:36 +0000

The LIOB‑560 Modules communicate over Ethernet/IP in the BACnet/IP and BACnet/SC network. They adhere to the BACnet Building Controller Profile (B-BC) and either expose their I/O data points through BACnet server objects or actively fetch them from a BACnet server via BACnet client maps.

According to the B-BC profile, the LIOB‑560 Modules support BACnet alarming, scheduling, and trending. They are BTL tested and certified.

Communication

The LIOB‑560 I/ O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB‑560 Modules are equipped with a web interface to query the device status and display or change each data point of the module. In addition to the BACnet object interface, the I/O data points are exposed by the integrated OPC server providing TLS encrypted web services (OPC XML‑DA) or UA Secure Conversation (OPC UA). The local display can be accessed via VNC.

LIOB‑IP Mode

The LIOB‑560 Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑560 Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, and L-IOB I/ O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

Features

I/O module with physical inputs and outputs
Dual Ethernet/IP interface
BACnet objects for integration in BACnet/IP, BACnet/SC channels
BACnet Client Mappings to access to BACnet/IP, BACnet/SC objects
Manual operation using the jog dial or VNC client
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Integrated web server for device configuration and monitoring data points
Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
B-BC (BACnet Building Controller) functionality, BTL certified
Supports BACnet Alarming, Scheduling, and Trending
Connected to the L‑INX Automation Server, L‑ROC Room Controller, and L-IOB I/O Controller
Automatic integration into device configurations with L‑INX, L‑ROC, and L-IOB I/O Controller
Easy device replacement without any additional software
Built-in OPC XML‑DA and OPC UA server
Math objects to execute mathematical operations on data points

LIOB-560 Module BACnet/IP Products

LIOB-560

LIOB-BIP I/O Modul: 20 Universal I/O (IO)

The post LIOB-560 Module BACnet/IP appeared first on Kepler Electronics.

LIOB-BIP I/O Modules BACnet/IP

Maen Sirhan — Tue, 02 Apr 2024 13:29:06 +0000

The LIOB-55x Modules communicate over Ethernet/IP in the BACnet/IP and BACnet/SC network. They adhere to the BACnet Building Controller Profile (B-BC) and either expose their I/O data points through BACnet server objects or actively fetch them from a BACnet server via BACnet client maps.

According to the B-BC profile, the LIOB-55x Modules support BACnet alarming, scheduling, and trending. They are BTL tested and WSPcert certified.

Communication

The LIOB-55x I/O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB-55x Modules are equipped with a Web interface to query the device status and display or change each data point of the module. In addition to the BACnet object interface, the I/O data points are exposed by the OPC XML-DA server of the modules. The local display can be accessed via VNC.

LIOB-IP Mode

The LIOB‑55x Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑55x Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, L-IOB I/O Controllers, and LIOB-AIR I/O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

Features

I/O module with physical inputs and outputs
Dual Ethernet/IP interface BACnet objects for integration in BACnet/IP, BACnet/SC channels
BACnet Client Mappings to access to BACnet/IP, BACnet/SC objects
Fulfills the BACnet Building Controller Profile (B‑BC)
Manual operation using the jog dial or VNC client
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Integrated web server for device configuration and monitoring data points
Compliant with ANSI/ASHRAE 135‑2012 and ISO 16484‑5:2012 standard
B-BC (BACnet Building Controller) functionality, BTL certified
Supports BACnet Alarming, Scheduling, and Trending
Connected to the L‑INX Automation Server, L‑ROC Room Controller, L-IOB I/O Controller, and LIOB-AIR I/O Controller via LIOB‑IP
Automatic integration into device configurations with L‑INX, L‑ROC, L-IOB I/O Controller, and LIOB-AIR
Easy device replacement without any additional software
Built-in OPC XML‑DA and OPC UA server
Math objects to execute mathematical operations on data points

LIOB-BIP I/O Modules BACnet/IP Products

LIOB-550

LIOB-BIP I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-551

LIOB-BIP I/O Module: 8 UI, 12 DI

LIOB-552

LIOB-BIP I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-553

LIOB-BIP I/O Module: 6 UI, 6 AO, 5 DO (4 x Relay 16 A, 1 x Relay 6 A)

LIOB-554

LIOB-BIP I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-BIP I/O Modules BACnet/IP appeared first on Kepler Electronics.

LIOB-IP852 I/O Modules LonMark

Maen Sirhan — Tue, 02 Apr 2024 13:28:11 +0000

The LIOB-45x Modules are LonMark certified and communicate over Ethernet/IP-852 in the LonMark System. They provide up to 512 address table entries (ECS mode) which eliminates all binding restrictions.

LonMark IP-852 Channel over Ethernet

The LIOB-45x I/O Modules are equipped with two Ethernet ports including a built-in Ethernet switch. This allows for building a daisy chained line topology of up to 20 devices, which reduces costs for network installation. Dual Ethernet port devices also allow the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The LIOB-45x Modules are equipped with a Web interface to query the device status. The local display can be accessed via VNC.

LIOB-IP Mode

The LIOB‑45x Modules can be switched to LIOB‑IP mode using manual local operation. In LIOB‑IP mode, the LIOB‑45x Modules extend L‑INX Automation Servers, L‑ROC Room Controllers and L-IOB I/O Controllers with physical inputs and outputs via plug and play.

Local Operation and Override

Features

I/O module with physical inputs and outputs
Ethernet/IP network interface
SNVT-based interface for integration on the LonMark IP-852 channel
LonMark certified
Up to 512 address table entries (ECS mode)
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Connected to the L‑INX Automation Server, L‑ROC Room Controller and L-IOB I/O Controller via LIOB‑IP
Automatic integration into device configurations with L‑INX, L‑ROC and L-IOB I/O Controller,
Easy device replacement without any additional software
Integrated Web server for the device configuration
LNS plug‑in for the device configuration in the LonMark System

LIOB-IP852 I/O Modules LonMark Products

LIOB-450

LIOB-IP852 I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-451

LIOB-IP852 I/O Module: 8 UI, 12 DI

LIOB-452

LIOB-IP852 I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-453

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LIOB-454

LIOB-IP852 I/O Module: 7 UI, 4 AO, 7 DO (5 x Relay 6 A, 2 x Triac 0.5 A), 1 Pressure Sensor

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-IP852 I/O Modules LonMark appeared first on Kepler Electronics.

LIOB-Connect I/O Modules

Maen Sirhan — Tue, 02 Apr 2024 13:24:47 +0000

LIOB‑10x/11x I/O Modules extend L‑INX Automation Servers, L‑ROC Room Controllers, and L-IOB I/ O Controllers with physical inputs, outputs or bidirectional I/Os. Several models with different I/O configurations are available.

LIOB-Connect

The LIOB‑10x/11x Modules have gold-plated connectors (LIOB‑Connect) to string multiple devices together and connect them to the L‑INX, L‑ROC or LIOB-586/587/588/589. These controllers automatically recognize the LIOB‑10x/11x I/O Modules and provide the resulting data points.

Local Operation and Override

Features

I/O module with physical inputs, outputs or bidirectional I/Os configurable as either input or output
Connected to the L-INX Automation Server, L-ROC Room Controller or L-IOB I/O Controller via LIOB‑Connect
Manual operation using the jog dial
128×64 graphic display with backlight
Local access to information about device status and data points in clear text and symbols
Automatic integration into device configurations with L-INX, L-ROC, and L-IOB I/O Controller
Easy device replacement without any additional software

LIOB-Connect I/O Modules Products

LIOB-100

LIOB-Connect I/O Module: 8 UI, 2 DI, 2 AO, 9 DO (5 x Relay 6 A, 4 x Triac 0.5 A)

LIOB-101

LIOB-Connect I/O Module: 8 UI, 16 DI

LIOB-102

LIOB-Connect I/O Module: 6 UI, 6 AO, 8 DO (8 x Relay 6 A)

LIOB-103

LIOB-Connect I/O Module: 6 UI, 6 AO, 5 DO (5 x Relay 16 A)

LIOB-110

LIOB-Connect I/O Module: 20 Universal I/O (IO)

LIOB-112

LIOB‑Connect I/O Module: 40 Universal I/O (12 optionally with 4-20 mA Current Output)

LIOB-A2

L‑IOB Adapter 2 to split the LIOB‑Connect bus using 4-wire cables

LIOB-A4

L‑IOB Adapter 4 to split the LIOB‑Connect bus using RJ45 network cables

LIOB-A5

L‑IOB Adapter 5 to terminate the LIOB-Connect bus

LPOW-2415A

LIOB-Connect Power Supply, 24 VDC, 15 W

LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

LPOW-2460B

Power supply unit with power connector 24 V DC, 60 W

L-TEMP2

External temperature sensor (NTC10K) for use with L-IOB Universal Inputs

The post LIOB-Connect I/O Modules appeared first on Kepler Electronics.

LOYREL-816 Relay Interface

Maen Sirhan — Fri, 29 Mar 2024 08:42:39 +0000

The LOYREL-816 is a relay interface containing eight 16 A relays that are controlled by eight 0/10 V outputs on a L-IOB, LROC-400 or LROC-402.

Features

Relay Interface for L-IOB, LROC-400 or LROC-402
Controls up to eight 16 A relays using 0/10 V inputs
Up to 64 A total current

LOYREL-816 Relay Interface Products

LOYREL-816

Relay Interface, 8 x Digital Output 16 A Relays, 8 x Digital Input 0/10 V

The post LOYREL-816 Relay Interface appeared first on Kepler Electronics.